Enable Windows Server 2008 R2 Remote Desktop Services
- On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ...
- Click Roles, and then click Add Roles. ...
- Select Remote Desktop Services, and then click Next. ...
- Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes. ...
- Click Next. ...
- Select an option to indicate whether network level authentication is required, and then click Next. ...
- Step 1: Begin the installation. ...
- Step 2: Select Remote Desktop Services roles you want to install. ...
- Step 3: Pick the license mode. ...
- Step 4: Allow access to Remote Desktop Session Host (not required) ...
- Step 5: Configure the client experience.
How do I enable remote access on Windows Server 2008 R2?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard.
How do I access my Remote Desktop settings?
To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.
How do I configure and monitor a VPN remote access server?
In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.
How do I configure remote access MMC on a server?
Use the Demand-Dial Interface Wizard in the Remote Access MMC snap-in. If you are using Server Manager, in Tools click Routing and Remote Access. Right-click the server in the tree, and then click Configure and Enable Routing and Remote Access. Follow the steps in the wizard to configure the connection.
How do I give remote access to a server 2008 R2?
Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...
How do I access Windows server remotely?
To connect to a remote computer from File Server Resource ManagerIn Administrative Tools, click File Server Resource Manager.In the console tree, right-click File Server Resource Manager, and then click Connect to Another Computer.In the Connect to Another Computer dialog box, click Another computer. ... Click OK.
How do I enable remote access to my server?
Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.
How do I open Active Directory users and Computers in Windows Server 2008?
Click on the Start Menu from the desktop and point to the All Programs option. Locate and select Active Directory Explorer from the list of available programs found in the All Programs menu.
How can I access my home server from outside?
Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.
How do I access files remotely?
How to Access your Computer Files from AnywhereDesktop Sharing Softwares. ... VPN Server. ... Dedicated Routers and NAS Devices. ... Online Backup Services.FTP Servers. ... Cloud Storage Services. ... Access Files Directly through the Browser. ... Opera Unite.More items...•
Why can't I connect to my remote server?
The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.
How do I access Active Directory users and Computers?
Click Start, point to Administrative Tools, and then click Active Directory Users and Computers to start the Active Directory Users and Computers console.
How do I Install Active Directory users and Computers on Windows 2008 R2?
Install Active Directory Domain Services on Windows Server 2008 R2 Enterprise 64-bitSelect domain name and password. Select your domain name and know the domain administrator password that you want to use. ... Specify the preferred DNS server. ... Add the Active Directory Domain Services role. ... Enable remote management.
How do I activate Active Directory users and Computers?
Right-click the Start button and choose “Settings” > “Apps” > “Manage optional features” > “Add feature“. Select “RSAT: Active Directory Domain Services and Lightweight Directory Tools“. Select “Install“, then wait while Windows installs the feature.
How can I remotely access another computer using IP address?
Once you've set up the target PC to allow access and have the IP address, you can move to the remote computer. On it, open the Start Menu, start typing “Remote Desktop” and select Remote Desktop Connection when it appears in the search results. Then in the box that appears type the IP address and click Connect.
Is Ras the same as VPN?
Information sent over a VPN is secure, it«s both authenticated and encrypted, while information sent via RAS lacks these security features. Although RAS served a purpose in providing LAN access to remote users, its time has clearly passed. 1.
How to enable remote access to a server?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.
What is VPN in Windows Server 2008 R2?
Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.
How to configure NPS data?
You can configure which NPS accounting data is sent to the computer running SQL Server by selecting options in the SQL Server Logging properties dialog box shown in Figure 9-9. Clicking Configure in this dialog box allows you to specify the properties of the data link to the computer running SQL Server. When configuring the data link properties for the SQL Server connection, you must provide the server name, the method of authentication that will be used with the computer running SQL Server, and the database on the computer running SQL Server that you will use to store the accounting data. Just as it is a good idea to have a separate partition on a computer to store NPS accounting data, it is a good idea to have a separate database that stores NPS accounting data.
Why use IKEv2 over VPN?
The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.
What is L2TP/IPsec?
L2TP/IPsec is the protocol that you need to deploy if you are supporting remote access clients running Microsoft Windows XP because such clients cannot use SSTP . L2TP/IPsec provides per-packet data origin authentication, data integrity, replay protection, and data confidentiality.
What is EAP TLS?
Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.
What is VPN authentication?
VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.
What is Server Manager 2008 R2?
Server to server – Server Manager on a full installation of Windows Server 2008 R2 can be used to manage roles and features that are installed on another server that is running Windows Server 2008 R2.
Can you remotely manage a server 2008 R2?
Windows Server 2008 R2, unlike Windows Server 2008 RTM, has a nice feature that allows you to remotely manage it, from another server or from a Windows 7 workstation , by using Server Manager.
Can you use Server Manager in Windows Server 2008 RTM?
Note: Windows Server 2008 RTM also has remote management capabilities. You can easily manage these servers by using almost any MMC Snap-In. However, the fact that you can use Server Manager to do it is new in R2.
How to access remote desktop settings?
To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.
Who has access to remote desktop?
Remote Desktop Users. Administrators have access by default.
Can you restrict remote desktop access to a few users?
Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.
Can you modify user access for remote desktop?
All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.
What happens if you don't use a local or remote server?
If you are not using a local or remote server to run NPS, then default remote access policies and accounting settings are automatically created on the destination server when Remote Access is configured.
How to enable weak encryption in Windows 2003?
You can enable weak encryption only by modifying the registry. During migration from Windows Server 2003, the required registry settings are not created on the new server by the migration process, and they must manually be configured. For later versions of Windows, if these registry settings are present, they are migrated. For more information about the registry entries that Remote Access adds, see “Registry entries that Routing and Remote Access adds in Windows Server 2008”, article 947054 in the Microsoft Knowledge Base ( https://go.microsoft.com/fwlink/?linkid=159112 ). The description of the settings for the weak encryption settings are at the end of the article, and they are named AllowPPTPWeakCrypto and AllowL2TPWeakCrypto.
How to collect settings from source server?
On the source server, from Windows PowerShell, collect the settings from the source server by running the Export-SmigServerSetting cmdlet as an administrator . The following is the syntax for the cmdlet:
What is the command to migrate users and groups?
Migrating users and groups can be combined with the cmdlets that are used to migrate Remote Access. The -Users and -Group parameters can be used in the Export-SmigServerSetting command to migrate the user and group accounts that are present locally on the Remote Access source server. If you are using an Active Directory domain or RADIUS for authentication, then these parameters are not needed.
What to do if Import-SmigServerSetting fails?
If a failure occurs while running the Import-SmigServerSetting cmdlet, review the Setupact.log, Setuperr.log, and ServerMigration. log files under %localappdata%SvrMigLog. Information about how the Remote Access components migrated is included in the Servermigration.log file.
Can you load Windows Server Migration Tools in PowerShell?
You should only load the Windows Server Migration Tools snap-in in a Windows PowerShell session that was opened by using another method, and into which the snap-in has not already been loaded.
Can remote access be running on the source server?
Remote Access can be running on the source server while you are capturing its configuration. However, if you made configuration changes to Remote Access that require a service restart, then you must stop Remote Access before starting the migration. Use the following PowerShell command to stop the service:
Question
I am having an issue mapping drives over my VPN connection using the MS Routing and Remote access connection.
Answers
I'm not sure why this has come up recently in multiple threads in the past week. Nonetheless, it's more than likely a configuration issue when it was setup, such as leaving that filter checkbox checked running the config wizard.
All replies
I'm not sure why this has come up recently in multiple threads in the past week. Nonetheless, it's more than likely a configuration issue when it was setup, such as leaving that filter checkbox checked running the config wizard.
