how to remote access to server 2008

Procedure

• On the Windows® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ...
• Click Roles, and then click Add Roles. ...
• Select Remote Desktop Services, and then click Next. ...
• Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes. ...
• Click Next. ...

More items...

Full Answer

How do I enable remote desktop on Windows Server 2008?

– A Server with Windows Server 2008. To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information.

How do I configure and monitor a VPN remote access server?

In this lesson, you will learn how to configure and monitor a VPN remote access server running Windows Server 2008 and Windows Server 2008 R2. To install the RRAS role service, use the Add Roles Wizard and then select Network Policy And Access Services. RRAS is a role service within this role.

How to allow connections from computers running Remote Desktop?

Alternatively, you can also choose Allow Connections From Computers Running Any Version Of Remote Desktop (for allowing remote desktop connection sessions with pre Windows Server 2008 systems). Once done, click OK. Note: make sure to do this on systems that you wish to remotely make connections to and from.

How do I get Remote Desktop Services (RDS)?

Learn step by step how to get Remote Desktop Services (RDS) and some of the basic RDS components up and running. Launch Server Manager and select Server Roles. Once the roles manager screen is up, check the box for Remote Desktop Services.

How do I give remote access to a server 2008 R2?

Enable Windows Server 2008 R2 Remote Desktop ServicesOn the Windows ® Server 2008 R2 computer, click Start > Administrative Tools > Server Manager. ... Click Roles, and then click Add Roles. ... Select Remote Desktop Services, and then click Next. ... Select the Remote Desktop Session Host and Remote Desktop Licensing check boxes.More items...

How do I access Windows server remotely?

To connect to a remote computer from File Server Resource ManagerIn Administrative Tools, click File Server Resource Manager.In the console tree, right-click File Server Resource Manager, and then click Connect to Another Computer.In the Connect to Another Computer dialog box, click Another computer. ... Click OK.

How do I enable remote access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

How do I open Active Directory users and Computers in Windows Server 2008?

Click on the Start Menu from the desktop and point to the All Programs option. Locate and select Active Directory Explorer from the list of available programs found in the All Programs menu.

How can I access my home server from outside?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I access files remotely?

How to Access your Computer Files from AnywhereDesktop Sharing Softwares. ... VPN Server. ... Dedicated Routers and NAS Devices. ... Online Backup Services.FTP Servers. ... Cloud Storage Services. ... Access Files Directly through the Browser. ... Opera Unite.More items...•

How do I connect to my server?

Windows InstructionsOpen the Start menu and click "Computer."Click the "Map network drive" button in the toolbar.Click the "Drive" menu and choose the letter to assign to the server.Fill in the Folder field with the IP address or hostname of the server you want to access.More items...

Why can't I connect to my remote server?

The most common cause of a failing RDP connection concerns network connectivity issues, for instance, if a firewall is blocking access. You can use ping, a Telnet client, and PsPing from your local machine to check the connectivity to the remote computer. Keep in mind ping won't work if ICMP is blocked on your network.

How do I access Active Directory users and Computers?

Click Start, point to Administrative Tools, and then click Active Directory Users and Computers to start the Active Directory Users and Computers console.

How do I Install Active Directory on Windows Server 2008?

Install Active Directory Domain Services on Windows Server 2008 R2 Enterprise 64-bitSelect domain name and password. Select your domain name and know the domain administrator password that you want to use. ... Specify the preferred DNS server. ... Add the Active Directory Domain Services role. ... Enable remote management.

How do I access Active Directory in PowerShell?

How do I connect to the AD drive using PowerShell?Log in to Windows Server 2012 with a user account that has permission to access AD and open PowerShell from the icon on the desktop Taskbar.Type Import-Module ActiveDirectory in the PowerShell window and press Enter.More items...•

How can I remotely access another computer using IP address?

Once you've set up the target PC to allow access and have the IP address, you can move to the remote computer. On it, open the Start Menu, start typing “Remote Desktop” and select Remote Desktop Connection when it appears in the search results. Then in the box that appears type the IP address and click Connect.

Is Ras the same as VPN?

Information sent over a VPN is secure, it«s both authenticated and encrypted, while information sent via RAS lacks these security features. Although RAS served a purpose in providing LAN access to remote users, its time has clearly passed. 1.

How to enable remote access to a server?

To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.

What is VPN in Windows Server 2008 R2?

Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.

Why use IKEv2 over VPN?

The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.

What is EAP TLS?

Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.

What is VPN authentication?

VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.

How to configure a RADIUS client?

To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.

When to use NPS as a proxy?

You should deploy NPS as a RADIUS proxy when you need to provide authentication and authorization for accounts from other AD DS forests. The NPS RADIUS proxy uses the realm name (which identifies the location of the user account) portion of a user name to forward the request to a RADIUS server in the target forest. This allows connection attempts for user accounts in one forest to be authenticated for the network access server in another forest. Using a RADIUS proxy for inter-forest authentication is not necessary when both forests are running at the Windows Server 2003 functional level or higher and a forest trust exists.

What is a remediation server?

Remediation servers generally host software updates and antivirus and anti-spyware definition files and are used to bring a client that has not passed a health check up to date. Remediation servers are accessible from the restricted networks that noncompliant clients are relegated to when they do not pass system health checks. Remediation servers allow these clients to be brought into compliance so that they can have unrestricted access to the network. Remediation server groups are added through the Remediation Server Group node of the Network Policy Server console, as shown in Figure 9-12.

How does server isolation work?

Server isolation works in a similar way to domain isolation except that instead of applying to all computers within a domain, a server isolation policy applies only to a specific set of servers in a domain. You do this by placing the computer accounts of the servers that will be isolated in a specific OU and then applying a GPO that has an appropriately configured connection security rule to that OU. When enforced, only computers that are members of the domain are able to communicate with the isolated servers. This can be an effective way of protecting servers when you must grant network access to third-party computers. The third-party computers are able to access some network resources, such as intranet web and DNS servers, but you can isolate specific network resources, such as file servers and databases, by configuring server isolation policies.

How to use NAP with DirectAccess?

You can incorporate NAP into your DirectAccess infrastructure as a way of ensuring that clients that are attempting to connect using DirectAccess from remote networks will be successful only if they meet network health requirements . Using NAP with DirectAccess requires similar infrastructure to the NAP IPsec enforcement method. It is necessary to ensure that your organization has at least one HRA as well as CAs that are configured to support NAP, NAP health policy servers, and necessary remediation servers. If your remediation and HRA servers are on the Intranet, you’ll need to perform the following steps:

What server does DHCP use?

To deploy DHCP NAP enforcement, you must use a DHCP server running Windows Server 2008 or Windows Server 2008 R2 because this includes the DHCP Enforcement Service (ES). The DHCP EC is included in the DHCP Client service on Windows 7, Windows Vista, Windows Server 2008, Windows Server 2008 R2, and Windows XP SP3.

What happens when a domain is enforced?

When enforced, computers that are members of the domain are isolated from computers that are not members of the domain. It is important to remember that in domain isolation scenarios, isolated computers can initiate communication with hosts outside the domain, such as web servers on the Internet.

How to enforce a standardized firewall?

The simplest method of enforcing a standardized firewall configuration across an organization is to use Group Policy. You can configure inbound and outbound rules, as well as enable and disable Windows Firewall with Advanced Security for specific profiles, through the Computer Configuration/Policies/Windows Settings/Windows Firewall With Advance Security node of Group Policy.

What is domain isolation?

Domain isolation uses an AD DS domain, domain membership , and Windows Firewall with Advanced Security Group Policy settings to enforce a policy that forces domain member computers to accept incoming communication requests only from other computers that are members of the same domain. When enforced, computers that are members of the domain are isolated from computers that are not members of the domain. It is important to remember that in domain isolation scenarios, isolated computers can initiate communication with hosts outside the domain, such as web servers on the Internet. However, they will not respond when network communication is initiated from a host outside the domain.

How to change service property in Windows Server 2008?

To change a service property, right-click on the service name, and then click Properties. From the Startup type list box, select Automatic. If the Service status is not started, click Start. Click OK. Close the Services window. You are now ready to enable DCOM on your Windows Server 2008.

Where is the security button for ROOT CIMV2?

Click the Security button below the menu tree. The Security for ROOTCIMV2 window is displayed.

What permissions do you need for DCOM?

The user or group you configured for DCOM access must also have Windows Management Instrumentation (WMI) permission to access the Windows event logs required by QRadar.

Can I use WinCollect on Windows 2008?

Event collection over WMI using Windows 2008 is only supported on 64-bit operating systems. Windows 32-bit operating systems do not include the required registry keys to complete the procedcures listed below. Therefore, WMI event collection is not supported on Windows 2008, 32-bit operating systems. Administrators with Windows 2008, 32-bit operating systems can use WinCollect to remotely poll for Security, Application, and System event logs.

How to access remote desktop settings?

To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.

Who has access to remote desktop?

Remote Desktop Users. Administrators have access by default.

Can you restrict remote desktop access to a few users?

Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.

Can you modify user access for remote desktop?

All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.