To remove the remote access VPN
Virtual private network
A virtual private network extends a private network across a public network, and enables users to send and receive data across shared or public networks as if their computing devices were directly connected to the private network. Applications running on a computing device, e.g. …
How do I remove the direct access role from Windows Server 2012?
When attempting to remove the Direct Access role from a Windows 2012 Server, you see the following; The validation process found problems on the server from which you want to remove features. The selected features cannot be removed from the selected server. Click OK to select different features. DirectAccess is configured on {host-name}.
How do I remove a role or feature from a server?
On the Windows desktop, start Server Manager by clicking Server Manager in the Windows taskbar. On the Windows Start screen, click the Server Manager tile. On the Manage menu, click Remove Roles and Features. On the Before you begin page, verify that you have prepared for removing roles or features from a server.
Can I remove roles and services from Server 2016?
You cannot remove roles, role services, or features from servers that are running Windows Server 2016, if you are running Server Manager on Windows Server 2012 R2, Windows Server 2012, or Windows 8.
How to turn off server roles in Windows 10?
Click on the Manage Menu in the upper right corner, then click remove Roles and Features, click next a couple times to get to Server Roles and unselect the roles you wish to remove. This was the solution for me. Initially I went through Control Panel -> Programs and Features -> Turn Windows features on or off (been doing it for years).
How do I delete an RDP role?
Right-click Remote Desktop Services, and then click Remove Role Services. On the Select Role Services page, clear the Remote Desktop Session Host check box, and then click Next. On the Confirm Removal Selections page, click Remove. On the Removal Progress page, removal progress will be noted.
How do I delete remote users?
If you want to remove a user, you need to open the Remote Desktop Users Properties panel, select the users from the list, and click on the Remove button. Click the OK button to save the change.
How do I decommission direct access?
Decommission the DirectAccess infrastructureRemove the configuration settings. ... Remove devices from the DirectAccess security group. ... Clean up DNS. ... Decommission the DirectAccess server. ... Remove any DirectAccess certificates from Active Directory Certificate Services.
How do I kick someone off a Windows server?
Click Start, click Settings, click the user name (top-right corner), and then click Sign out. The session ends and the station is available for log on by any user. Click Start, click Settings, click Power, and then click Disconnect.
What is the difference between DirectAccess and VPN?
DirectAccess can be used to provide secure remote access and enhanced management for Windows laptops managed by IT, while VPN can be deployed for non-managed devices.
What is AoVPN?
AoVPN allows any PCC Laptop to be always connected to the PCC network and business applications. To protect PCC information, we will also install security software on your device known as BitLocker. This encrypts your device making sure no one can unlock it without the correct BitLocker PIN.
What is DirectAccess connection?
“DirectAccess provides users transparent access to internal network resources whenever they are connected to the Internet.” DirectAccess does not require any user intervention or any credentials to be supplied in order to connect. It can be thought of as if the machine makes the connection to internal resources.
How do I find users in Remote Desktop group?
Click the Browse button, type Remote and click the Check Names and you should see REMOTE DESKTOP USERS come up. Click OK in the Add Groups dialog. Click Add beside the MEMBERS OF THIS GROUP box then click Browse. Type the name of the domain group, then click the Check Names button, then click OK to close this box.
How do you select users that can remotely access this PC?
This is typically done on your Office Computer.Click the Start menu from your desktop, and then click Control Panel.Click System and Security once the Control Panel opens.Click Allow remote access, located under the System tab.Click Select Users, located in the Remote Desktop section of the Remote tab.More items...•
How do I change my Remote Desktop account?
0:002:10How to change remote desktop connection settings on WindowsYouTubeStart of suggested clipEnd of suggested clipYou need to open up the remote desktop. Application go to the Start menu. Type remote and if youMoreYou need to open up the remote desktop. Application go to the Start menu. Type remote and if you just start typing it it should show up click on the application.
How do I change user in Remote Desktop?
Add Users to Remote Desktop in Windows 10Press Win + R hotkeys on the keyboard. ... Advanced System Properties will open.Go to the Remote tab. ... The following dialog will open. ... The Select Users dialog will appear. ... Select the desired user in the list and click OK.Click OK once again to add the user.
How to remove roles and features from a server?
On the Windows desktop, start Server Manager by clicking Server Manager in the Windows taskbar. On the Windows Start screen, click the Server Manager tile. On the Manage menu, click Remove Roles and Features. On the Before you begin page, verify that you have prepared for removing roles or features from a server.
How to open Server Manager?
On the Windows desktop, start Server Manager by clicking Server Manager in the Windows taskbar. On the Windows Start screen, click the Server Manager tile. On the Manage menu, click Add Roles and Features.
Can you use PowerShell to install roles?
Although you cannot use the Add Roles and Features Wizard to install roles, role services, and features on more than one target server in a single wizard session, you can use a Windows PowerShell script to install roles, role services, and features on multiple target servers that you are managing by using Server Manager.
Can you leave management tools?
You can leave management tools and snap-ins if you plan to use the selected server to manage the role on other remote servers. On the Confirm removal selections page, review your role, feature, and server selections. If you are ready to remove the roles or features, click Remove.
Can Server Manager be used to manage a newer release of the Windows Server operating system?
Server Manager cannot be used to manage a newer release of the Windows Server operating system. Server Manager running on Windows Server 2012 or Windows 8 cannot be used to install roles, role services, and features on servers that are running Windows Server 2012 R2. You must be logged on to a server as an administrator to install ...
Do you have to be a member of the Domain Administrators group to change the Group Policy settings?
You must be a member of the Administrators group to change Group Policy settings on the local computer. If Group Policy settings for the computer you want to manage are controlled at the domain level, you must be a member of the Domain Administrators group to change Group Policy settings.
How to remove roles and features in Windows PowerShell?
The Server Manager deployment cmdlets for Windows PowerShell function similarly to the GUI-based remove Roles and Features Wizard, with an IMPORTANT difference. In Windows PowerShell, unlike in the remove Roles and Features Wizard, management tools and snap-ins for a role are not removed by default. To remove management tools as part of a role removal, add the IncludeManagementTools parameter to the cmdlet. If you are uninstalling roles and features from a server that is running the Server Core installation option of Windows Server 2012 or a later release of Windows Server, this parameter removes command-line and Windows PowerShell management tools for the specified roles and features.
How to install roles and features?
To install roles and features by using the add Roles and Features Wizard. If Server Manager is already open, go on to the next step. If Server Manager is not already open, open it by doing one of the following. On the Windows desktop, start Server Manager by clicking Server Manager in the Windows taskbar.
How to specify a WIM file?
You can specify a WIM file as an alternate feature file source when you are installing roles, role services, and features on a running, physical server . The source path for a WIM file should be in the following format, with WIM as a prefix, and the index in which the feature files are located as a suffix: WIM:e:sourcesinstall.wim:4. However, you cannot use a WIM file directly as a source for installing roles, role services, and features to an offline VHD; you must either mount the offline VHD and point to its mount path for source files, or you must point to a folder that contains a copy of the contents of the WIM file.
How to mount an offline VHD?
You must be logged on to a server as an administrator to install or uninstall roles, role services, and features. If you are logged on to the local computer with an account that does not have administrator rights on your target server, right-click the target server in the Servers tile, and then click Manage As to provide an account that has administrator rights. The server on which you want to mount an offline VHD must be added to Server Manager, and you must have Administrator rights on that server.
What is Server Manager cmdlet?
In Windows Server, the Server Manager console and Windows PowerShell cmdlets for Server Manager allow installation of roles and features to local or remote servers, or offline virtual hard disks (VHDs). You can install multiple roles and features on a single remote server or offline VHD in a single add Roles and Features Wizard or Windows PowerShell session.
How to start server manager?
On the Windows desktop, start Server Manager by clicking Server Manager in the Windows taskbar.
Can Server Manager be used to manage a newer release of the Windows Server operating system?
Important. Server Manager cannot be used to manage a newer release of the Windows Server operating system. Server Manager running on Windows Server 2012 R2 or Windows 8.1 cannot be used to install roles, role services, and features on servers that are running Windows Server 2016.
Problem
When attempting to remove the Direct Access role from a Windows 2012 Server, you see the following;
Solution
1. This is because this server is still getting its settings for Direct Access via GPO, to get round the problem (quickly). Windows Key+R > Regedit {enter} > Navigate to;
Install Roles, Role Services, and Features by Using Windows Powershell Cmdlets
Remove Roles, Role Services, and Features by Using Windows Powershell Cmdlets
- The Server Manager deployment cmdlets for Windows PowerShell function similarly to the GUI-based Remove Roles and Features Wizard, with an important difference. In Windows PowerShell, unlike in the Remove Roles and Features Wizard, management tools and snap-ins for a role are not removed by default. To remove management tools as part of a role remo...
Tall .NET Framework 3.5 and Other Features On-Demand
- Starting with Windows Server 2012 and Windows 8, the feature files for .NET Framework 3.5 (which includes .NET Framework 2.0 and .NET Framework 3.0) are not available on the local computer by default. The files have been removed. Files for features that have been removed in a Features on Demand configuration, along with feature files for .NET Framework 3.5, are availabl…
Configure Alternate Sources For Feature Files in Group Policy
- The Group Policy setting described in this section specifies authorized source locations for .NET Framework 3.5 files, and other feature files that have been removed as part of a Features on Demand configuration. The policy setting Specify settings for optional component installation and component repair is located in the Computer Configuration\Administrative Templates\Systemfo…