In your dashboard, go to Settings/General, click on the Configure link under Cloud Access. Click on the Manual tab, and enter port 80 in the first box, and 443 in the second, these may be filled in already. Then click on Save.
Full Answer
How do I find the IP address of my Cloud pr2100/pr4100?
For My Cloud PR2100, click Settings, then click Network. The IP address is displayed in the Network Profile area. For My Cloud PR4100, on the front of the device, click the down button to the right of the Status LCD display.
How do I remote access my Plex server?
Remote Access. Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
Why can’t I connect my Plex Media Server to my router?
Ensure your Plex Media Server is signed in to your Plex account (Remote Access requires signing in) For automatic configuration, make sure your router supports the “UPnP” or “NAT-PMP” feature
How do I set up remote access to MyCloud public files?
Set it up so that each user has a password to access the MyCloud PUBLIC files. Connect to your NAS via the browser of your choice using the ID you have created for remote access and click to view files on the PUBLIC folder.
What port do you forward plex media server to?
What to do if remote access is disabled?
How fast can you upload a stream?
Does Plex Media Server allow remote access?
Can you manually specify port forwarding?
Does Plex Media Server require a Plex Pass?
See 3 more
About this website
How do I connect my Plex to my WD My Cloud?
To enable Plex Media Server on the My Cloud Home, first enter the Services area of the device control panel. Select the Plex service entry and then Enable it. Once Plex Media Server is installed and running, use the Configure button to launch Plex Web App and take you through the initial setup.
How do I enable remote access on Plex?
To do so:Open Plex Web App and make sure you're signed in to your Plex account on the server under Settings > Server > General.Go to Settings > Server > Remote Access.If needed, toggle the Show Advanced button to ensure the appropriate options are visible.Enable the Manually specify public port checkbox.More items...•
Can Plex connect to cloud storage?
A single Plex client can access multiple servers, so you can maintain both local and cloud libraries and use one app to view media from both.
How do I allow Plex outside the network?
Enable access to your Plex Media Server from outside your local network so that you can reach it when away from home or for sharing content with family or close, personal friends. You can do this under Settings > Server > Remote Access in Plex Web App.
Do you need Plex pass for remote access?
It's not true. All users can stream remotely providing you've configured your Plex Server correctly. Head to Settings > Remote Access > Enable Remote Access to set it up. In this regard, the Plex Pass is only useful if you're going to be in a place with no internet—it lets you save content directly onto your device.
What is the IP address for Plex?
Open a browser window. Type http://localhost:8888/web into the address bar. The browser will connect to the Server as if it were local and load Plex Web App.
How do I use my WD My Cloud as a media server?
To turn on the WD My Cloud DLNA server go to “Settings” then “Media in the configuration and turn on “Media Streaming.” This will allow you to store movies, TV shows, photos, and music on your WD My Cloud and view them on any device on your network.
Can you stream from cloud storage?
Cloud Storage supports streaming transfers, which allow you to stream data to and from your Cloud Storage account without requiring that the data first be saved to a file.
How do I stream movies from the cloud?
0:261:59How to Stream Movies, Music and Photos from WD My Cloud - YouTubeYouTubeStart of suggested clipEnd of suggested clipAn hdmi cable connects the wd tv live media player right to your tv. From there you can eitherMoreAn hdmi cable connects the wd tv live media player right to your tv. From there you can either connect wirelessly to your home network or use an ethernet. Cable.
Does Plex require port forwarding?
To make the most of Plex and get direct access to Plex's servers, you will need to set up port forwarding on your router.
What port should I use for Plex?
TCP: 32400The most important port to make sure your firewall allows is the main TCP port the Plex Media Server uses for communication: TCP: 32400 (access to the Plex Media Server) [required]
Does Plex require a static IP address?
A Public Static IP is not needed, largely because the AT&T "dynamic" address changes so infrequently that Plex will have no trouble tracking you down.
How do I use my phone as a remote for Plex?
An Android, Windows Phone 8, BlackBerry or Java mobile device....Setup is quick and simple!Step 1: Install Vectir PC Server. ... Step 2: Install Vectir Mobile Client App. ... Step 3: Install Plex Remote Profile. ... Step 4: Connect and control Plex!
Why can't I access my Plex server?
Verify that your Server is listed on your Devices page. Disable any VPN on your computer or router. Disable any proxies being used on your computer or router. Make sure you aren't requiring secure connections on the server while using an app that doesn't support them (see below)
How do I share Plex with family?
Enter the username or email address of the person you want to share your library with, and click on the user when it pops up. In the next window, choose which libraries you share with others. To share all of them, select your server and click Save. Or select only the libraries you want to share, then click Save.
Is Plex remote access safe?
Plex has teamed up with Let's Encrypt to provide our users with high-quality secure certificates for your media servers, at no cost to you. There's no need to set up VPNs and no need to create and install your own certs. You can safely and securely connect to your media no matter where you are.
Plex Media server is on an "Indirect" connection when off LAN network
So, after a recent update, Plex Media Server is only available as an “indirect connection” when I access it off of my home WiFi/LAN. I have a separate Modem and Router. My modem has a different IP address than my router, as per “whatismyip.com”. I have the correct port forwarding set up on my router, but do I need to change my Modem’s IP address to match my router’s IP address, or ...
How to find my cloud IP address?
Using IP Address Enter the IP address of your My Cloud device in the browser’s address field: http://<IP Address>. For My Cloud PR2100, click Settings, then click Network. The IP address is displayed in the Network Profile area. For My Cloud PR4100, on the front of the device, click the down button to the right of the Status LCD display.
How to eject a USB drive from my cloud?
BACKING UP AND RETRIEVING FILES Ejecting a USB Drive Use the following steps to eject a USB drive from your My Cloud device. Click the USB icon at the top of the page. Click the Eject USB drive button. Remote Backups This option allows you to back up your My Cloud device to another My Cloud device.
How to view my cloud on Windows 7?
THE DASHBOARD AT A GLANCE IF you want to launch from . . . THEN . . . Windows 7 Click > Computer. In the left panel, select Network. In the right panel, locate your My Cloud device under Storage. Double-click the device, or right-click and select View device webpage from the resulting menu.
What is the network profile section of the network screen?
CONFIGURING SETTINGS Network Profile The Network Profile section of the Network screen displays network information for the My Cloud device . The Network Profile section displays the following information: Status The current status of Internet connectivity. MAC Address The Media Access Control (MAC) address for this device. IPv4 IP Address The IP version 4 address for this device.
What is the My Cloud folder?
GETTING STARTED Accessing Content The My Cloud device’s Public folder contains Shared Music, Shared Pictures, and Shared Videos subfolders. The existing content of the subfolders are files that you dragged and dropped or files that have been backed up from your computer or an attached USB drive. Note: Any of the folders can hold any file type.
How to register WD drive?
You can easily register your drive online at http://register.wd.com or by using My Cloud device software.
What is RAID 1 mode?
MANAGING STORAGE RAID Mode Description RAID 1 In RAID 1 mode, the RAID controller duplicates all data from one drive to a second drive in the drive group. RAID 1 provides complete data redundancy, but cuts the required storage capacity in half. RAID 5 RAID 5 mode offers superior performance and protection by striping data across 3 or more drives and dedicating a quarter of each drive to fault...
Will87 be remote access?
will87 December 26, 2020, 1:51pm #21. If you need remote access to your devices I would recommend using a vpn as a workaround. They are more likely secure than using the remote dashboard anyway. With vpn access it would be like accessing the device directly.
Is remote management required?
This thread shows Remote Management is required by users, so should be offered with a way forward for users who have these products in remote locations, giving them the ability to remotely manage .
How to connect to my cloud?
1. In a Finder window, click the My Cloud device (see “Appendix. D: My Cloud Device URLs and Names” on page 104 for a list of. device names) under the shared items in the side bar. 2. If presented with an authorization page, enter your Username. and password or select Guest and click Connect to display the.
How to connect my cloud to my home network?
1. Using the Ethernet cable, connect one end of the Ethernet cable to the Ethernet port located. on the back of the device. 2. Connect the other end of the Ethernet cable directly into a router or network switch port.
How to map my cloud?
To map the My Cloud Public folder for quick access in the future: 1. In Windows Explorer, under Network, click the My Cloud device (see “Appendix D: My Cloud. Device URLs and Names” on page 104 for a list of device names). 2. Right-click the Public folder and select Map Network Drive from the menu. 3.
How to install a hard drive in my cloud?
“Physically Connecting your Device” on page 10. 1. Pull the handle on the front of the hard disk drive toward you. 2. Slide the approved hard disk drive into the drive bay, making sure that it is properly seated.
How to set up a NAS drive?
You will need to do three things: 1 Put the drive in if this is empty NAS and connect the cables and power it on 2 Go through setup wizard and choose what data protection mode you want. One or two disk (RAID1,5,6) 3 And mount the drive to your computer. So it will appear similar to your C: drive.
How to set up static IP address on Plex?
You’ll need to identify your Plex Media Server computer on the network and then look for an option in your router to create a “static IP”, “static lease”, or “DHCP reservation” to permanently associate the Plex Media Center with a given IP address. Below you can see an example of what adding a static IP address looks like, via our DD-WRT router.
How to port forward on Plex?
First, let’s turn on the manual port mode in Plex. To do so navigate to Settings > Server > Remote Access (as we did in the previous section of the tutorial).
What does the control panel indicate on Plex?
In addition to telling you that the server is accessible, the control panel will also indicate the internal IP address and port number of the Plex Media Server on your local network as well as external, or public, IP address and port number.
How to check if Plex is disabled?
While logged into your Plex Media Server’s web control panel, select the Settings icon from the upper right toolbar. Within the Settings menu select, the “Server” tab.
Can you use Plex Media Server on a TV?
If you primarily use Plex Media Server for watching content on your local network (like streaming your favorite shows to your HDTV or smartphone), you may not have given much though to the benefits of remote access. RELATED: How to Set Up Plex (and Watch Your Movies on Any Device)
Can you watch Plex on your phone?
One of the greatest things about the Plex Media Server platform, however, is the ease with which you can access your media from anywhere. With remote access enabled and properly configured, you can watch your favorite TV shows anywhere you have internet access: on your phone while you’re sitting in a waiting room, on your laptop while you’re vacationing, or even on a smart TV at a friend’s house.
Can you disable remote access on Plex?
During the initial setup of the Plex Media Server, the setup wizard prompts you to enable or disable remote access. While the default state is enabled, you may have opted at the time to disable remote access, or perhaps you inadvertently disabled it while messing around with the system settings later on. Regardless, it’s easy enough to check the status of remote access and enable it if it is currently disabled.
What port do you forward plex media server to?
If you are manually forwarding a port, set that forward up beforehand and make sure you know the external port number which you are forwarding (remember that you need to forward the external port you choose to internal port 32400 for the internal IP address of the device running Plex Media Server)
What to do if remote access is disabled?
If Remote Access is currently disabled, then use the Enable Remote Access button to trigger your server to try to configure a connection. The server will attempt to automatically configure a connection through your router using UPnP or NAT-PMP first.
How fast can you upload a stream?
For instance, you might decide that you don’t want any individual remote stream to go over 4 Mbps, even if you have a higher total internet upload speed and allow multiple streams.
Does Plex Media Server allow remote access?
The information displayed by default will depend on the current state of the Plex Media Server. Unless disabled, your Plex Media Server will attempt to set up Remote Access for you.
Can you manually specify port forwarding?
If the automatic port configuration for connecting to plex.tv fails (or if you otherwise simply prefer to set up your port forward manually), you can manually specify the port using this setting. Our “Troubleshooting” article (linked below) has more details about how to set up a manual port forward.
Does Plex Media Server require a Plex Pass?
Tip!: This feature requires an active Plex Pass subscription for the Plex Media Server admin Plex account.
