There are 6 steps to setting up your NVR for remote viewing: Understand Your Network Setup DDNS Setup A Port Forward Assign The DDNS Hostname To Your NVR Set Two IP Addresses For Your NVR
How are Alibi security IP cameras installed on a network?
See below. Alibi Security IP cameras are usually installed on a network in either of two ways: • Connected to the internal switch of a network video recorder (NVR): In this configuration, Ethernet cables connect the camera directly to an NVR back panel.
How do I connect my DVR/NVR to the Internet?
To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.
How to access the NVR with IP Cam A and B?
• The Smartphone (Android or iOS) with Alibi Witness app can access the NVR with IP Cam A through the Guarding Vision Cloud service without port forwarding the router. However, the router must be configured for port forwarded to IP Cam B and IP Cam C to access them.
What do I do if my alibi camera is inactive?
“Activate” inactive Alibi camera When an Alibi camera is first installed, or reset to its factory configuration, it must be “Activated” before it can be used. In the Alibi Configuration Tool, “Inactive” devices have a Security status of Inactive, and an IPv4 address of 192.168.1.64.
How do I connect to NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
Can I access my security NVR remotely?
DVRs/NVRs that have a built-in network capability can be accessed over the internet remotely or outside your home network on a computer, desktop video surveillance software, phone apps or web browsers.
How do I set up remote access to my security cameras?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I connect my alibi to WIFI?
0:105:13Alibi Witness P2P Mobile Setup for Remote Viewing - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight click on the screen. And go to hit the menu button on the top left hand side in the menu youMoreRight click on the screen. And go to hit the menu button on the top left hand side in the menu you want to go to configuration on the left hand side you want to go to network.
How do I connect my NVR to my smartphone?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How do I find my NVR IP address?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
What is Onvif setting?
As I mentioned before, Onvif (Open Network Video Interface Forum), is an Open Industry aimed to facilitate the communication of IP based video products with other devices that are not necessarily from the same manufacturer.
How do I access NVR on my computer?
Plug one end of the included HDMI cable into the HDMI port on the back of the NVR. Plug the other end of the HDMI cable into the back of your TV or monitor. NOTE: To view cameras, TV/Monitor must be tuned to the same Input the HDMI is plugged into. Plug the USB mouse into the USB port on the back of the NVR.
How do I add a remote IP camera to NVR?
0:131:25How to Connect a Remote IP Camera to a QC Series NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera select private now enter the IP address of your IP. Camera enter your port number username.MoreCamera select private now enter the IP address of your IP. Camera enter your port number username. And password then click OK when you're finished adding cameras. Click on OK.
Why can't I view my security cameras online?
What to Do If You Cannot Remotely View Security Cameras Using the Internet via Port Forwarding. Make sure your cameras are connected to the network. Ensure all the ports of the network configuration are mapped to the Internet. Open the firewall in the router to allow Internet access to the camera.
How do I view my alibi cameras on my computer?
0:157:00FAQ - How do I set up my Alibi Witness App for remote viewing?YouTubeStart of suggested clipEnd of suggested clipIn the menu you will want to click on devices. Once in devices you want to click on the upper rightMoreIn the menu you will want to click on devices. Once in devices you want to click on the upper right hand corner where you see the plus sign.
Why can't I view my CCTV on my phone?
Why can't I see my CCTV on my phone? There may be times when you struggle to connect your CCTV to your phone or computer through the app. The first thing to check is your Internet Router. It's possible it is no longer sending an internet connection to your CCTV Recorder (DVR / NVR).
How do I access Hikvision NVR remotely?
Go the following menu location: Configuration --> Network --> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.
How do I access NVR on Iphone?
0:083:07How to Access your NVR from an iPhone - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to do this all you have to do is simply go into your DMS s software. And go to your deviceMoreSo to do this all you have to do is simply go into your DMS s software. And go to your device manager to set this up ok so. I have it already set up here it's called NVR.
How do I access my security cameras from an IP address?
1:384:35How to Find the IP Camera Address & Set up Port Forwarding for Remote ...YouTubeStart of suggested clipEnd of suggested clipNow let's see how to remotely. Access your camera using the ip address via a web browser. PleaseMoreNow let's see how to remotely. Access your camera using the ip address via a web browser. Please note that real link battery powered cameras don't support remote access via the ip. Address you need to
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
How to log into NVR?
Logging in from a computer is usually as simple as entering your DDNS hostname into an Internet browser and using the NVR’s username and password to view your feeds.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
What are the main things to configure an NVR?
To experience the amazing features of a recorder you need to start by setting some essential parameters. Not only do you get to explore the functionality of your NVR, but you get to safeguard your network as well.
What can you do by setting storage parameters on your NVR?
By setting storage parameters on your NVR, you can determine the primary storage device. You also have the freedom to alter archive settings.
How to configure snapshot alerts?
You can configure snapshot alerts via email without installing a storage device. When setting an alarm schedule, the recorder uses a 24-hour clock. To get the correct IP address of your NVR, log into the system and click the Network Tab. Ensure the DHCP checkbox is active.
How to check NVR HDD?
To check or make changes to the NVR HDD follow these steps: Log into the system. Under Settings, click the Storage tab. A window will appear where you can see all details and parameters concerning your storage device.
What is the NVR application?
Every NVR comes with a client desktop application that allows you to make changes to the recorder settings. The User Interface might be different, but the procedure is virtually the same. If it is the first time plugging in your recorder to a monitor or TV, you will go through an install wizard.
What operating system does an NVR come with?
An NVR comes with an operating system. To safeguard it from malicious exploits, always check for software updates. No matter how detailed you get with the configurations, you will end up with a useless black box if you do not update it on a regular basis. Your NVR will have either a Linux or Windows OS.
How to reduce false alarms on a camera?
Set alarm trigger for the cameras. To reduce false alerts, you have to alter the detection sensitivity level. In order to increase sensitivity, you have to lower the figure indicated on the screen. A low figure indicates higher detection sensitivity.
