Type the IP address (such as the default 192.168.1.1 or the one set according to your needs) of your switch. Press “Enter” and the login dialog will pop up. 3. Type in the username and password with administrative authority, then click “OK” and you can check the configuration status of the switch, and configure or modify the switch port.
Full Answer
How do I configure the switch for remote management?
The objective of this lab is to configure the switch for remote management such that the laptop PC residing on a remote network be used to login and manage it via ssh . To accomplish this, the following will be done: (i) Assign IP addresses, subnetmask and default gateways. Implementation.
How do I configure remote access?
Configure the Remote Access server settings. Configure the infrastructure servers that are used in the organization. Configure the application servers to require authentication and encryption. View the Remote Access configuration summary, and modify the GPOs if desired.
How to configure a network switch?
8 Steps to Configure a Network Switch 1 Inspect your hardware. Check the model number of your shiny new switch. Or, if you are using a spare, check the device hardware and its ... 2 Set up management IP. 3 Check VTP revision number. 4 Configure access ports. 5 Configure trunk ports. See More....
How do I set up DirectAccess on Windows 10?
In the Remote Access Management Console, in the middle pane, click Run the Remote Access Setup Wizard. In the Configure Remote Access dialog box, select DirectAccess and VPN, DirectAccess only, or VPN only. For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group.
How do you remote access a switch?
Step 1 From the remote host, enter the telnet command and the name or IP address of the switch you want to access. Step 2 At the prompt, enter the password for the CLI. If no password has been configured, press Return. Step 3 Enter the necessary commands to complete your desired tasks.
What do you need to configure on a switch to allow remote management?
To prepare a switch for remote management access, the switch must be configured with an IP address and a subnet mask. Keep in mind that to manage the switch from a remote network, the switch must be configured with a default gateway. This is very similar to configuring the IP address information on host devices.
How do I remotely control a Cisco switch?
0:2112:19Cisco router and switch configure remote access (telnet/ssh) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor telnet in the way we need to do that is we edit the vty lines Pete definitely BTY stands forMoreFor telnet in the way we need to do that is we edit the vty lines Pete definitely BTY stands for virtual terminal 0 to 15. And then we need to tell it we want set a password we'll set that to Cisco.
Which protocol should be used to manage a switch remotely?
Secure Shell (SSH) is a protocol that provides a secure (encrypted) management connection to a remote device.
What is basic switch configuration?
Basic switch configuration can be thought of as the minimum network, port, and security provisioning required for the production deployment of a switch. In practice, your exact needs will vary from environment to environment. And overall, effective switch management is a detailed topic in its own right.
Why would you configure a switch with an IP address?
If you want to be able to manage your switch remotely over the network, your switch needs an IP address. If your switch has multiple VLANs configured, and you want to be able to manage the switch from each VLAN, the switch requires an IP address on a VLAN interface in each VLAN.
How do I connect my Cisco Remote?
Cisco Remote ProgrammingLocate the Manufacturer and codes from the list provided.Turn on the TV.On the Remote, press and hold the TV button.On the Remote, press and hold the OK button.Release both keys at the same time. ... Enter a four digit number matching the TV Manufacturer from the list provided. ... Test remote functions.More items...•
How do I access a Cisco switch?
Configuring the Switch Web GUIConnect your PC to the service port and configure an IPv4 address to use the same subnet as the switch. ... Start Internet Explorer 10 (or later), Firefox 2.0. ... On the Accessing Cisco Switch page, click the Wireless Web GUI link to access switch web GUI Home page.More items...
Why would a Layer 2 switch need an IP?
A switch, as a Layer 2 device, does not need an IP address to transmit frames to attached devices. However, when a switch is accessed remotely through the network, it must have a Layer 3 address. The IP address must be applied to a virtual interface rather than to a physical interface.
What are the 4 types of switches in networking?
Types of Network SwitchesKVM Switch.Managed Switch.Unmanaged Switch.Smart Switch.PoE Switch.
How do you tell if a switch is managed or unmanaged?
Managed switches support more granular control, yet unmanaged switches have lower prices. Managed switches have more capability than unmanaged switches, but they also require a skilled administrator or engineer to make the most of them.
Do you need a managed switch for VLANs?
You can get by without a managed switch only if all the devices for the VLANs can be configured for VLANs. Given your guest and IoT LANs, I'd say not. If you were, for example, setting up a guest WiFi and the AP was the only device that needed VLANs, then an unmanaged switch would be OK.
Which of the following tools allow remote management of servers?
Which of the following tools allow for remote management of servers? Both Telnet and SSH are tools for remote management of servers.
Which service must be running in order to perform remote management in PowerShell?
On all other supported versions of Windows, you need to run the Enable-PSRemoting cmdlet to enable PowerShell remoting. The remoting features of PowerShell are supported by the WinRM service, which is the Microsoft implementation of the Web Services for Management (WS-Management) protocol.
How do I enable remote management in PowerShell?
PowerShell remoting is enabled by default on Windows Server platforms. You can use Enable-PSRemoting to enable PowerShell remoting on other supported versions of Windows and to re-enable remoting if it becomes disabled. You have to run this command only one time on each computer that will receive commands.
How do I start Windows Remote Management Service?
Type winrm quickconfig at a command prompt. If you're not running under the local computer Administrator account, then you must either select Run as Administrator from the Start menu, or use the Runas command at a command prompt.
How to verify SSH access to Cisco switch?
Verify SSH access by typing ‘sh ip ssh’ to confirm that the SSH is enabled. You can now try to log in from a remote machine to verify that you can ssh to your Cisco switch.
How to contact Cisco?
Contact Cisco. Get a call from Sales. Product / Technical Support. Training & Certification. 1-800-553-6387. US/CAN | 5am-5pm PT. Just like riding a bicycle, nobody's born knowing how to setup a network switch. And this process is a little more advanced than, say, setting up your home Internet or even a plug-and-play type switch.
What is the key modulus for a key?
Choose the size of the key modulus in the range of 360 to 2048 for your General Purpose Keys. Choosing a key modulus greater than 512 may take a few minutes.
Does a switch update VLAN?
Your switch will only process data from a neighboring switch coming from the same domain and if the revision number of the neighboring switch is higher than its own. This means that the switches will update their VLAN configuration based on the VTP information being sent by the switch with the highest revision number.
How to access router settings?
Access your router settings by inputting your router IP address into your browser
Why would you want to configure a router as a switch?
Why would you want to configure a router as a switch? Every year, Wi-Fi technology becomes increasingly advanced, which means your old router might soon be unable to support your current Wi-Fi needs. But this doesn’t mean it’s useless. The Ethernet networking element of the router remains useful, allowing consumers to use it as a network switch. A switch is useful whenever you want to share an Ethernet cable between numerous devices.
What Is a Switch?
A switch is sometimes referred to as a network bridge.
How to change password on a router?
This is an important security factor. To change your router’s password, follow these steps: 1 Access your router settings by inputting your router IP address into your browser 2 Log in with router username and password 3 Visit “Settings” and click on “Change Router Password” 4 Input your chosen password (keeping in mind a strong password should have at least eight characters and feature letters, numbers, and special characters) and save the new settings
Why change SSID?
Changing your SSID makes identifying your network much faster. Secondly, some routers will have a default SSID to identify the type of router being used, which can make it easier for hackers to attack your network. While it’s a small change, switching your default SSID should still be on your list.
How to find my router IP address?
First, go to your settings and click on “Network & Internet.” Then select “View your network properties.” You should see “Default gateway” and a number beside it. This number is your router IP address. Type this address into your web browser’s search bar and a login or welcome page should appear.
What are the advantages of switching routers?
One of the great advantages of router and switch configuration is you can increase security in several ways. The most basic thing you can do is change the router password from its default to something more secure and unique . This prevents hackers from accessing your router settings.
How to access remote access server?
On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
How to install Remote Access on DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.
How to deploy DirectAccess for remote management only?
In the DirectAccess Client Setup Wizard, on the Deployment Scenario page , click Deploy DirectAccess for remote management only, and then click Next.
How to add roles and features to DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.
What group does DirectAccess belong to?
For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.
How to add domain suffix in remote access?
On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.
What is a remote access URL?
A public URL for the Remote Access server to which client computers can connect (the ConnectTo address)
How to connect to a remote desktop?
Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
How to use Remote Desktop on Windows 10?
Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...
How to check if Windows 10 Home is remote?
To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.
What is SSH on Cisco router?
The Secure Shell (SSH) is a cryptographic network protocol for operating network services securely over an unsecured network. The best-known example application is for remote login to computer systems by users.
What is SSH in network?
SSH provides a secure channel over an unsecured network in a client-server architecture, connecting an SSH client application with an SSH server. Common applications include remote command-line login and remote command execution, but any network service can be secured with SSH.
How to get started with managed switch?
First of all, to get started simply plug the managed switch into your network. We’re assuming here that you’re currently working with a flat network so everything can see everything. You’re going to need to make sure you’re plugging the managed switch into the correct part of your network if you’re already got other managed switches and VLANs set up all over the place. But we’ll skip over that added complexity for the purpose of simplicity in this blog post.
What happens if you type IP address on Ubiquiti switch?
Now what is interesting with Ubiquiti UniFi managed switches is that if you type the IP address of your managed switch into the web browser, nothing happens . Nothing loads. And this is because the Ubiquiti UniFi hardware works differently than the vast majority of other networking hardware in the sense that we configure everything via an external piece of software called the Ubiquiti UniFi Controller. This is a piece of software that lives on a separate device such as your laptop or desktop computer. Here’s what this looks like to visualise how all this interacts;
What does the blue line on a switch mean?
What we are looking at here, the black lines shows how everything is plugged in. The blue lines show how the process works for managing your UniFi managed switch. Pretty cool really, and this architecture of how all this works is one of the reasons that UniFi is completely blowing things away in the market with how there are designing and managing their networking hardware to make your life as easy as possible. Whether you are a small office/home office user or working up towards medium and large sized businesses. The Ubiquiti kit really is amazing.
What is interesting once you’ve logged into your local UniFi controller Software locally?
What is interesting once you’ve logged into your local UniFi Controller Software locally is that if you view your UniFi account on the UniFi website, you’ll notice the exact same details listed. This is extremely handy to see what is happening on your local network from anywhere in the world. The reality is though is that this functionality is only
What is device adoption?
Device Adoption is simply the process of connecting a UniFi device to your UniFi Controller Software so that you can manage it accordingly. You can read more about that here if you are interested. Just before we jump into adopting the device. A couple of nice little features within the UniFi dashboard are worth pointing out. Firstly, the Events button in the left navigation, the one that looks like a calendar icon with an * in the middle. Here you can see the exact date and time you plugged the UniFi managed switch into your network;
Is managed switch part of network?
Awesome, now your managed switch is part of your network you are good to start to configure it in the way you like. We’re going to stop this blog post here as the configuration elements of a network can get very detailed so we’ll pick that up in a future blog post.
What is TeamViewer remote access?
Flexible and scalable, the TeamViewer remote access and support platform is the foundation of our suite of software solutions, with countless use cases and prebuilt integrations with popular IT and business applications.
How to set up TeamViewer?
On your work computer: Install TeamViewer on your work computer, create an account, and set up Easy Access directly from the Remote Control tab. For extra security we recommend activating two-factor-authentication through your profile settings. On your home computer:
Can you see what is happening on a remote computer?
You can see at first glance what is happening on the remote computer.
