- Click the Windows Start button. This is the button with the Windows logo in the bottom-left corner of your screen. ...
- Then click Settings. This is the gear-shaped icon just above the power button.
- Next, click System.
- Then click Remote Desktop in the left sidebar. You can find this by scrolling down. ...
- Next, click the slider next to Enable Remote Desktop. This will cause a new window to pop up.
- Then click Confirm. A pop-up box appears asking you if you would like to enable remote desktop. ...
- Next, type firewall into the search bar of the Settings window. ...
- Then choose Allow an app through Windows firewall. If you don’t see this option, click Show All, and then select it from the list.
- Then click Change settings. Initially, the apps and the checkboxes beside them will be grey or disabled. Once you click Change settings, they will turn black and become enabled.
- Tick the Private and Public checkboxes to the right of Remote Desktop. Make sure both that the boxes under the Private and Public columns are checked.
- Finally, click OK.
How to set up windows for remote file access?
- Select Start.
- In your programs list, Expand Windows Accessories, then select Remote Desktop Connection. ...
- Enter your home computer's IP address, then select Connect.
- Enter your Home computer's username and password, then select OK.
- Your computer is not certified by a third party verification service. ...
How to disable remote access in Windows 10?
To disable Remote Assistance on Windows 10, use these steps:
- Open Control Panel.
- Click on System and Security. …
- Under the “System” section, click the Allow remote access option. …
- Click the Remote tab.
- Under the “Remote Assistance” section, clear the Allow Remote Assistance connection to this computer option.
How to enable allow remote connection in Windows 10?
Steps to enable allow remote connection in Windows 10:
- Open System using Windows+Pause Break.
- Choose Remote settings in the System window.
- Select Allow remote connections to this computer and tap OK in the System Properties dialog.
How do I get permission to access a folder?
- Assign Shared Folder Permissions for User Groups: This one will let you set 15 types of permissions.
- Encrypt the Folder: You can add an administrator password. Once done, the user must enter the password to access the files on the network.
- Share the folder on the network for other users to access it.
How do I give remote access to a folder?
How to Share a Folder with a Remote DesktopType the IP address or name of the remote computer in the "Computer" box.Click the button that says "Options ".Select the devices you wish to share access with by placing check-mark in the appropriate boxes.More items...
How do I remotely access my computer Windows 10?
On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
How do I create a shared folder between two computers?
Share a folder, drive, or printerRight-click the folder or drive you want to share.Click Properties. ... Click Share this folder.In the appropriate fields, type the name of the share (as it appears to other computers), the maximum number of simultaneous users, and any comments that should appear beside it.More items...•
How do I create a shared folder in Windows 10?
To share a file or folder over a network in File Explorer, do the following:Right-click (or long-press) a file, and then select Show more options > Give access to > Specific people.Select a user on the network to share the file with, or select Everyone to give all network users access to the file.
How do I access my computer remotely?
Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. . ... Tap the computer you want to access from the list. If a computer is dimmed, it's offline or unavailable.You can control the computer in two different modes. To switch between modes, tap the icon in the toolbar.
How can I remotely access a computer?
No matter which method you use, the first step to connecting to another computer is enabling remote access. On a PC, go to Start, right-click Computer, and choose Properties. Then go to Remote Desktop by clicking on Remote settings, and check the box next to Allow Remote Assistance.
How can I access files on another computer on my network?
Open File Explorer and select a file or folder that you wish to give other computers access to. Click the “Share” tab and then choose which computers or which network to share this file with. Select “Workgroup” to share the file or folder with every computer on the network.
How do I make a folder accessible to everyone?
SymptomsRight-click the folder, and then click Properties.Click the Sharing tab, and then click Share to open the File Sharing dialog box.In the File Sharing dialog box, type Everyone in the box, and then click Add. By default, Read permissions are applied for the Everyone object.Click Share, and then click Done.
How do I setup a network folder?
Follow these steps to create a network location:Select Start, Computer to open the Computer folder.Right-click an empty section of the Computer folder, and then click Add a Network Location. ... Click Next in the initial wizard dialog box.Select Choose a Custom Network Location, and then click Next.More items...•
Does Windows 10 have remote assistance?
On Windows 10, the Windows Remote Assistance tool is a little hidden. You can still find it by opening the Start menu, searching for “Remote Assistance”, and clicking the “Invite someone to connect to your PC and help you, or offer to help someone” option.
How can I remotely access my computer for free?
10 Best Free Remote Desktop Tools You Should KnowTeamViewer. Available in premium and free versions, TeamViewer is quite an impressive online collaboration tool used for virtual meetings and sharing presentations. ... Splashtop. ... Chrome Remote Desktop. ... Microsoft Remote Desktop. ... TightVNC. ... Mikogo. ... LogMeIn. ... pcAnywhere.More items...
How do I enable remote access?
Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.
How do I access another computer on the same network?
Access other computersOpen File Explorer.In the Navigation pane on the left, click 'Network'.You will see all devices that are connected to the network. ... If prompted, enter the username and password that will grant you access to the system.You will see the Users folder and have access to select files.
How to Enable Remote Desktop
The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was a...
Should I Enable Remote Desktop?
If you only want to access your PC when you are physically sitting in front of it, you don't need to enable Remote Desktop. Enabling Remote Desktop...
Why Allow Connections only With Network Level Authentication?
If you want to restrict who can access your PC, choose to allow access only with Network Level Authentication (NLA). When you enable this option, u...
How to set up remote desktop on Windows 10?
How to Set Up Remote Desktop Windows 10. To set up a remote desktop in Windows 10, go to Settings > System > Remote Desktop. Then turn on the slider for Enable Remote Desktop. Next, search Settings for Allow an app through Windows firewall and enable the Remote Desktop app for Private and Public. Note: You can only run the Remote Desktop Connection ...
How to remotely access another computer?
To remotely access another computer within your network over the internet, open the Remote Desktop Connection app and enter that computer’s name, and your username and password.
How to check private and public on remote desktop?
Tick the Private and Public checkboxes to the right of Remote Desktop. Make sure both that the boxes under the Private and Public columns are checked.
Where is the remote desktop icon?
Then click Remote Desktop in the left sidebar. You can find this by scrolling down. It is the icon that looks like greater than and less than signs pointing at each other.
Where is the Windows Start button?
Click the Windows Start button. This is the button with the Windows logo in the bottom-left corner of your screen. Do this from the host computer (or the computer you will be trying to access remotely).
Can you connect to a remote computer if it cannot be identified?
Note: You might encounter a prompt asking you if you want to connect even if the identity of the remote computer cannot be identified. Just click on Yes .
How to allow remote access to PC?
The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was added in the Windows 10 Fall Creators update (1709), a separate downloadable app is also available that provides similar functionality for earlier versions of Windows. You can also use the legacy way of enabling Remote Desktop, however this method provides less functionality and validation.
How to remotely connect to Windows 10?
Windows 10 Fall Creator Update (1709) or later 1 On the device you want to connect to, select Start and then click the Settings icon on the left. 2 Select the System group followed by the Remote Desktop item. 3 Use the slider to enable Remote Desktop. 4 It is also recommended to keep the PC awake and discoverable to facilitate connections. Click Show settings to enable. 5 As needed, add users who can connect remotely by clicking Select users that can remotely access this PC .#N#Members of the Administrators group automatically have access. 6 Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.
How to connect to a remote computer?
To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.
Should I enable Remote Desktop?
If you only want to access your PC when you are physically using it, you don't need to enable Remote Desktop. Enabling Remote Desktop opens a port on your PC that is visible to your local network. You should only enable Remote Desktop in trusted networks, such as your home. You also don't want to enable Remote Desktop on any PC where access is tightly controlled.
How to use Remote Desktop on Windows 10?
Set up the PC you want to connect to so it allows remote connections: Make sure you have Windows 10 Pro. To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go ...
How to connect to a remote desktop?
Use Remote Desktop to connect to the PC you set up: On your local Windows 10 PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
How to check if Windows 10 Home is remote?
To check, go to Start > Settings > System > About and look for Edition . For info on how to get it, go to Upgrade Windows 10 Home to Windows 10 Pro. When you're ready, select Start > Settings > System > Remote Desktop, and turn on Enable Remote Desktop. Make note of the name of this PC under How to connect to this PC. You'll need this later.
Chrome Remote Desktop
Google’s solution for remote access is one of the most dead-simple options out there.
TeamViewer
One of the most popular options for remote desktop access is TeamViewer, which is free for personal use. With a modern, user-friendly interface, it makes the setup and connection process simple.
TightVNC
Its website may look like an early 2000s relic, but you can’t argue with TightVNC’s reliability or its reputation. As open-source software, it’s community supported and vetted. Adjusting settings in the program is also a transparent and fairly straightforward process, which is both its greatest strength and weakness.
How to connect to a remote desktop?
With your drive sharing settings in place, return to the General tab and type your remote PC or server IP address in the Computer box under the Log-on Settings section. Click Connect to make the connection. Once connected to your remote desktop, open Windows File Explorer.
How to open remote desktop connection?
You can find this in your Windows Start menu under the Windows Accessories folder, or by clicking Win + R to open the Windows Run dialog box, then typing mstsc and clicking OK to open it. The Remote Desktop Connection tool, when first launched, is pretty basic.
How to use RDP file?
Once your RDP file is saved, you can then use it to directly connect to your remote desktop in future. Double-clicking on the file to open it will launch the RDC tool and automatically connect with your predetermined settings applied.
What is RDC in Windows 10?
The Remote Desktop Connection (RDC) feature of Windows allows you to remotely view and control remote Windows desktops. Sharing resources between your local and remote PC can be tricky, but it is possible to share your local files and folders over a remote desktop session using RDC or other remote desktop tools like TightVNC.
What is Remote Desktop Protocol Settings?
Remote Desktop Protocol settings files are designed to be interchangeable with other software that allows RDP connections.
How to transfer files from one PC to another?
In the TightVNC File Transfer window, select the files and folders you want to move from A to B (from your local PC to your remote PC, or vice versa). Click the >> or << buttons to begin the transfer. Click Yes to confirm that you want the transfer to begin.
How to see shared drives on remote desktop?
Once connected to your remote desktop, open Windows File Explorer. You can do this by right-clicking your Start menu button and clicking File Explorer. In File Explorer, you should see your shared drives listed under the Redirected drives and folders section. These settings may only last for the duration of your connection to your remote desktop. ...
What does it mean when you connect to a remote desktop?
When you connect to your PC by using a Remote Desktop client, you're creating a peer-to-peer connection. This means you need direct access to the PC (some times called "the host"). If you need to connect to your PC from outside of the network your PC is running on, you need to enable that access. You have a couple of options: use port forwarding or set up a VPN.
What does it mean to connect to a PC from outside?
This means you need direct access to the PC (sometimes called "the host"). If you need to connect to your PC from outside of the network your PC is running on, you need to enable that access. You have a couple of options: use port forwarding or set up a VPN.
How to enable port forwarding on router?
Enable port forwarding on your router. Port forwarding simply maps the port on your router's IP address (your public IP) to the port and IP address of the PC you want to access. Specific steps for enabling port forwarding depend on the router you're using, so you'll need to search online for your router's instructions.
Where can I find my router's IP address?
Your public IP address (the router's IP). There are many ways to find this - you can search (in Bing or Google) for "my IP" or view the Wi-Fi network properties (for Windows 10).
Can RD client access PC?
Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC. There are a number of VPN services available - you can find and use whichever works best for you.
