Enabling Hik-Connect
- On your computer open SADP Tool. This program will show you any Hikvision equipment connected directly to your network. ...
- Select your NVR or DVR from the list by ticking the box to the left of it. ...
- When you select the device you will see a panel of information on the right that looks like the one in the image above. ...
Full Answer
How to set up NVR remote access?
Step by Step Instructions
- Connect NVR to network with a CAT5 cable.
- Download and install ConfigTool from DahuaSecurity.com, under Support->Download Center->Software
- Run the ConfigTool.
- The ConfigTool should display your IP Camera. ...
- Configure Internet Explorer security settings to allow the plugs to work. ...
- Login with the default credentials: User Name: admin Passsword: admin
How to setup HIK connect on DVR and NVR?
How to Setup Hik-Connect P2P Service • Using the console of the NVR or DVR, select System Configuration from the Main Menu. • The system configuration menu is where to set the date and time, configure the network setting, change port numbers, enable Hik-connect P2P service, setup email, users accounts and more.
How to upgrade a Hikvision NVR or DVR locally?
To update firmware on the DVR / NVR:
- Download the correct firmware for the system to a formatted USB drive.
- Insert the USB drive into the USB port of the DVR / NVR.
- Right-click on the Live View to access the Quick Menu.
- Click Main Menu and then click the Setting icon ( ).
- Click Setting > Upgrade.
- Click Start.
How to access camera behind NVR?
- Open a web browser that is compatible with your recorder. ...
- Type the IP address for your NVR or DVR into the address bar of the web browser. ...
- As we mention above if you’re unsure what the IP address of your recorder is, check it out by navigating to the network settings menu. ...
- Login using the admin account. ...
How do I enable remote access on Hikvision NVR?
Go the following menu location: Configuration --> Network --> Platform Access. PRODUCTS: HIKVISION DEVICES TOPICS COVERED IN THIS KBA: How to enable Hik-Connect remote access on HIK devices (NVR/DVR/Camera). c. Select the Enable tick box at the top of the page.
How do I access my Hikvision CCTV remotely?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
How do I connect to NVR remotely?
There are 6 steps to setting up your NVR for remote viewing:Understand Your Network.Setup DDNS.Setup A Port Forward.Assign The DDNS Hostname To Your NVR.Set Two IP Addresses For Your NVR.Verify That Local Viewing and Remote Viewing Work.
How do I access Hikvision NVR on my phone?
How to Use Hik-Connect on Mobile for both iOS and Android?Download the “Hik-Connect” app from the iOS app store or Google Play. How to Use Hik-Connect on Mobile (iOS and Android)Open the app. ... Now you have two options: either login your Hik-Connect account, or add your device to the Hik-Connect App directly.
How can I view my CCTV from anywhere?
Install viewing software. The viewing software may be proprietary to your CCTV provider. The best CCTV providers have a smart app that you can install on any mobile device and then track it yourself. Companies like Pro-Vigil offer viewing software for free that you can download to your mobile devices.
How do I turn off Hikvision NVR remotely?
On the old Hikvision CCTV recorder right click with the mouse, click menu, then click shutdown at the bottom right, and then click shutdown again. You'll see a message “system is shutting down please wait” after few seconds it will then show “Please power off”.
How do I access my IP camera away from home?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I find my NVR IP address?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
How can I access NVR from mobile?
How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.
How do I find my Hik-connect IP address?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
What is Hik-connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is 'dev.eu.hik-connect.com' and press “Save”.
How can I see Hikvision on multiple devices?
Steps: On the More page, tap More->Manage Sharing Settings to enter the Manage Sharing Settings page. Tap to enter the Recipient page....Option 2Tap Add Recipient.Enter the email address or the mobile phone number.Tap to add the account to the account list.Select the account from the account list and then tap Next.
How do I access Hik-Connect online?
You can enable Hik-Connect service for a device on the device web page.Visit the device IP address on the web browser.Enter the device user name and device password to log in to the device web page.Tap Configuration > Network > Advanced Settings > Platform Access to enter the Platform Access page. ... Check Enable.More items...
How do I find the IP address of my Hikvision camera?
Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into. There you have it – you're now logged into the camera and ready to perform actions on the camera. Load up SADP – you should see all the IP addresses of the cams listed.
What is Hik-Connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is 'dev.eu.hik-connect.com' and press “Save”.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
How to log into NVR?
Logging in from a computer is usually as simple as entering your DDNS hostname into an Internet browser and using the NVR’s username and password to view your feeds.
How does DDNS work?
Setting up DDNS gives your network a nickname that ensures you can reach your network even when the IP address changes. This is done through a DDNS provider that associates your network with a customized nickname. You’re basically giving your router a static URL that’s linked to its dynamic WAN address so you can access it from an Internet browser or smartphone app.
Is a WAN address static?
The WAN address can either be static (generally for large businesses) or dynamic for residential and small businesses. Dynamic addresses are rotated by Internet Service Providers for security purposes or power fluctuations.
Can I use a security camera on my phone?
On a smartphone, you’ll need to use a compatible app or you won’t be able to connect to your security cameras. Once you enter the credentials into the app, you’ll be able to see your live feeds and save footage from anywhere you have a cellular signal or WIFI access.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
