- Step 1. Log into your recorder.
- Step 2. Right click anywhere on the screen to bring up the menu.
- Step 3. Select the menu to bring up additional settings.
- Step 4. Select "Configuration" then select "Network."
- Step 5. Check "Enable DHCP" and then select "Apply" to apply the setting. ...
- Step 6. Refresh the page by leaving the network settings and returning to it. ...
- Step 7. ...
How to configure DVR for remote viewing?
How to configure DVR for remote viewing 1 The types of DVR remote viewing. You can install the security cameras and set up the DVR using the manufacturer instructions and its cloud service or you can use port ... 2 Port forwarding for DVR remote viewing. ... 3 Video: Port forwarding for DVR remote viewing. ... 4 Extra information. ...
How do I set up remote access to my recorder?
Remote access cannot be done with just the default IPs all new recorders come with. Step 1. Locate the LAN port on the back of your recorder. "LAN" is usually written below the port, indicating that it is the LAN port. Step 2. Insert the Ethernet cable into the LAN port of your recorder. Step 3.
How do I set up DDNS for dvrlists?
Select Network → Basic Settings 4. Select DDNS at the top. 5. DDNS type LTS (Default) 6. Domain Name: put your dvrlists address in here.
How do I change the default port on my DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
How to access DVR from outside network?
What is the IP address of a DVR?
How to know if your DVR is on the same network as your home network?
What happens if you assign an IP address to a DVR?
How to get terminal without quotes?
Can I access my DVR from my router?
See 1 more
How do I setup my DVR for remote viewing?
Please follow these setup instructions to setup remote Internet access for the dual codec JPEG DVR:Assign your DVR an IP Address.Connect to your DVR on your LAN - Local Area Network.Setting up Port Forwarding on your Router.Setting up a Static DHCP IP address for your DVR.Remote Internet Setup.More items...
How do I connect my LTS DVR to my phone?
1:092:44LTS Connect APP, Downloading & Setup - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll be prompted up to this screen to go ahead and set up your devices. So we want to go ahead andMoreYou'll be prompted up to this screen to go ahead and set up your devices. So we want to go ahead and click on the plus sign to add a device here you're going to be prompted with the qr.
How do I access LTS DVR?
1:243:01LTS Academy, How to Setup Your Free LTS DDNS Account ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd test it go to the interface of the NVR or DVR. Click on menu on the bottom left corner click onMoreAnd test it go to the interface of the NVR or DVR. Click on menu on the bottom left corner click on configuration slide to the right then click on network under.
How do I find the IP address of my LTS DVR?
0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.
What is the default password for LTS DVR?
12345The default user name is admin and password is 12345.
How do I add a device to LTS?
Manual AddingClick the. (+ Sign) in the upper right hand corner.Select Manual Adding.Enter the ID(Serial) Number (9 Digits) of the device.Enter the verification code of the device that you set when you enabled PT Cloud.Click Skip to finish, and then click on the Device to Live View it.
How do I get my LTS Connect verification code?
Register an account on LTS Connect with your mobile phone number. You will receive the verification code through SMS. You will use this code in the “Input Verification Code” section.
Is LTS same as hikvision?
90% of LTS products are from Hikvision. Hik has an OEM line for LTS and Hunt. They just changed the model name and a bit of case look. If Hik is banned from the USA, LTS should be banned as well.
How do I reset my LTS DVR password?
To reset the password on an LTS NVR, DVR or IP camera involves sending an email to the LTS support center with the “System Date” or the “Password Reset” file. They will reply to you with a reset code or recovery file that you use to reset the lost password.
Does a DVR have an IP address?
If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.
How do I connect my DVR to my local network?
Connect Your DVR to Your LAN | Basic Network ConnectionGo to the COMMAND PROMPT. ... Figure 3 shows a computer screen with the command prompt, and the PROGRAM FILES folder is open. ... Write down the IP numbers shown under IP ADDRESS (192.168. ... Now get the IP Address of the security DVR.More items...
How do I connect my DVR to my laptop?
Attach an audio/video cable to the back of the DVR. If using an HDMI cable, simply align the prongs from the cable plug with the jack on the DVR and attach securely. If using RCA-type plugs, insert the red and white audio plugs into the red and white audio jacks (right and left, respectively) on the back of the DVR.
How do I export a video from my LTS DVR?
0:072:41How to Export Footage DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipBe sure to plug your flash drive up to the USB port on the front. You just go to the bottom left ofMoreBe sure to plug your flash drive up to the USB port on the front. You just go to the bottom left of the screen enter your password or drawing that will set up an initial.
How do I get my LTS Camera back online?
Disconnect the Camera from the Power Source and Power Cycle it. The very first thing to try in order to get your camera back online is to disconnect it from the power source. Unplug the camera and let it sit for a few minutes and after a few minutes have passed, plug the camera back in.
How do I connect to nvms7000?
0:011:23How to Setup Your NVMS7000 Tutorial Video For Android UsersYouTubeStart of suggested clipEnd of suggested clipPhone first go to the Google Play Store. Search MVM s7000 select the app then click on install.MorePhone first go to the Google Play Store. Search MVM s7000 select the app then click on install. Select accept to begin the download. Wait for it to download to your phone.
How do I port forward LTS DVR?
0:121:50LTD OR LTS DVR PORT FORWARD. - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou have the static IP setup if you click obtain an IP address automatically the IP will keepMoreYou have the static IP setup if you click obtain an IP address automatically the IP will keep changing if your DVR reboots ok so you have to make sure.
192.168.1.108 Admin Login - Clean CSS
Enter the IP 192.168.1.108 into your browser and pressing enter.. If no login screen shows up, try finding the correct IP address for your router by Searching for your router
DVR Remote Viewer (free) download Windows version
Download DVR Remote Viewer for free. DVR Remote Viewer is an application used for connecting to security camera.
How to access DVR from outside network?
The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.
What is the IP address of a DVR?
By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.
How to know if your DVR is on the same network as your home network?
First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.
What happens if you assign an IP address to a DVR?
This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.
How to get terminal without quotes?
For Apple users, go to the top right corner and type in the spotlight window the word “terminal” without quotes and hit return. , or click the Command key next to the “Alt” key and the space bar to bring up the picture above. Type “terminal” without quotes and a window will show up like the picture below:
Can I access my DVR from my router?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
Reset Password
Submit a request to reset your password and our support staff will respond as soon as possible.
TeamViewer v.11
Quick support with LTS TeamViewer – get started with v11 in less than a minute.
TeamViewer v.12
Quick support with LTS TeamViewer – get started with v12 in less than a minute.
TeamViewer v.15
Quick support with LTS TeamViewer – get started with v15 in less than a minute.
Join Me
Instant screen sharing with powerful meeting tools and unlimited audio.
Tools
Calculate storage, field of view, and lens angle our online calculators.
Videos
Watch how to tutorials, explore new technology, and learn what’s new here at LTS.
What port is remote viewing on a DVR?
As you can see, now it's possible to use the DVR remote viewing feature using a web browser (port 8080) or a software (port 37777).
What is the default port for a DVR?
Go to the DVR's network menu and check which port is used for software. Let's say you are using a Dahua DVR, the default port is 37777 or if you are using a Hikvision DVR the default port is 80000. Make sure to check your DVR. Open your web browser again and use the port for the configuration.
What is the IP address of Lynksys router?
The picture below shows the Lynksys router E1200 with the configuration for the DVR port forwarding. it's using the port 8080 and IP address 192.168.2.100.
Can you use the same principle to configure IP cameras for remote viewing?
You can use the same principle to configure IP cameras for remote viewing.
Can you configure a router?
As long as you have the necessary information you can configure the router.
How to set up a NVR for remote viewing?
1. Understand Your Network. Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
How to log into NVR?
Logging in from a computer is usually as simple as entering your DDNS hostname into an Internet browser and using the NVR’s username and password to view your feeds.
How does DDNS work?
Setting up DDNS gives your network a nickname that ensures you can reach your network even when the IP address changes. This is done through a DDNS provider that associates your network with a customized nickname. You’re basically giving your router a static URL that’s linked to its dynamic WAN address so you can access it from an Internet browser or smartphone app.
What is the local address of a router?
Your router’s local address will generally be 192.168.1.1, depending on your service provider. Any devices connected to that router – smartphones, computers, tablets, NVRs – are assigned a different last number at the end instead of ‘1’. These addresses can only be accessed locally under normal circumstances.
Do you have to enter the same password for NVR?
The username and password will remain the same, but you won’t have to enter the ports for the local connection. Using a smartphone app only requires you to fill in the NVR’s credentials once, but you’ll have to set two IP addresses for your NVR.
How to access DVR from outside network?
The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.
What is the IP address of a DVR?
By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.
How to know if your DVR is on the same network as your home network?
First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.
What happens if you assign an IP address to a DVR?
This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.
How to get terminal without quotes?
For Apple users, go to the top right corner and type in the spotlight window the word “terminal” without quotes and hit return. , or click the Command key next to the “Alt” key and the space bar to bring up the picture above. Type “terminal” without quotes and a window will show up like the picture below:
Can I access my DVR from my router?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
