- Go to Q See Remote Access Setup website using the links below
- Enter your Username and Password and click on Log In
- If there are any problems, here are some of our suggestions
Full Answer
How do I setup my computer for remote access?
To enable remote connections on Windows 10, use these steps:
- Open Control Panel.
- Click on System and Security.
- Under the “System” section, click the Allow remote access option ...
- Click the Remote tab.
- Under the “Remote Desktop” section, check the Allow remote connections to this computer option.
How to set up secure remote access?
- Windows or Mac login when connecting remotely
- Request permission to connect to the user’s computer
- Automatically blank the remote screen when connected
- Automatically lock remote computer when disconnected
- Lock the remote computer’s keyboard and mouse while in session
- Lock the streamer settings using Splashtop admin credentials
How to setup the remote access portal on a PC?
Windows 10 Fall Creator Update (1709) or later
- On the device you want to connect to, select Start and then click the Settings icon on the left.
- Select the System group followed by the Remote Desktop item.
- Use the slider to enable Remote Desktop.
- It is also recommended to keep the PC awake and discoverable to facilitate connections. ...
How do you access a remote server?
- The remote computer must be turned on at all times and have a network connection.
- The client and server applications need to be installed and enabled.
- You need the IP address or the name of the remote machine you want to connect to.
- You need to have the necessary permissions to access the remote computer.
How do I access my Q-See camera remotely?
0:543:45Complete Remote Viewing Set Up in less than 4 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you power up the DVR go to the menu on the DVR menu screen select information and now selectMoreOnce you power up the DVR go to the menu on the DVR menu screen select information and now select system it will now display on the screen what your firmware is currently.
How do I connect my Q-See camera to my phone?
0:492:14How to set up the QT View Smartphone Application - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first time you start the app log in and enter your DVR IP address if you'll be connecting toMoreThe first time you start the app log in and enter your DVR IP address if you'll be connecting to your DVR on the same network say from within the same building enter the local IP. Address.
How do you connect Q-See?
1:206:26How to Install a Q-See QC Wi-Fi System - YouTubeYouTubeStart of suggested clipEnd of suggested clipOption a HDMI first plug the included HDMI cable into the NVRs HDMI port and connect the other endMoreOption a HDMI first plug the included HDMI cable into the NVRs HDMI port and connect the other end of the HDMI cable to the monitor or TV now plug the monitor or TV into a surge protector.
Does Q-See app still work?
Q-See, while going out of business, has discontinued all of their apps and PC software. This affects all customers who relied on remote viewing to keep an eye on their property or business.
How do I see Q-See on my iPhone?
0:001:27Q-see Installation Video - iPhone Set up - YouTubeYouTubeStart of suggested clipEnd of suggested clipAccount you'll see an icon for a player click on the eighth player icon click setting button gearsMoreAccount you'll see an icon for a player click on the eighth player icon click setting button gears icon at the bottom right corner of the screen enter.
What is the default password for Q-See?
adminWhen you click EmailSet it will ask you for login credentials, use the default username “admin” and default password “admin”. D. Enter your email address, select a security question and provide an answer.
How do I register my q see device?
Launch the app on your mobile device. Tap on Register and create an account for the new camera. *All screenshots shown are from the Q-See Plus app on Android. Enter an email address to use for your account.
What DVR will work with QSEE cameras?
Viewtron DVRs work with all of them. Compatible with all coax camera resolutions – QSEE made various models of BNC / coax cable security cameras with various resolutions. Viewtron DVRs support all video resolutions: CIF, D1, 960H, 1mp / 720p, 2mp / 1080p, 3mp, 4mp, 5mp, 8mp, 4K.
How to access DVR remotely?
In order to access your DVR remotely, you must connect it to a router or a modem. Using a router allows you to connect to your DVR from other computers on your LAN (Local Area
How to make your DVR accessible from outside of your network?
To make your DVR accessible from outside of your local network, you have to “forward” ports 80, 100 and 9000 through your router to your DVR’s IP address. We present two options which cover the majority of users - UPnP and Port Forwarding. You will only need to use one or the other. If you are unable to connect your DVR to the Internet using either of these procedures, the likely cause is the presence of multiple routers on your network. The solution is covered in Section 1.6 Resolving Connection Issues.
How to connect to the internet on a DVR?
This connection will be made by plugging the included Ethernet cable into the port on the back of the DVR marked RJ45. Your DVR is not designed to be connected wirelessly to a network. It is also recommended that the router that the DVR is connected to should be connected directly to the Internet rather than to another router if Internet access is desired as multiple routers can create problems with connectivity. You will also need to have a computer connected to the same router - at least temporarily - to make certain settings. If, after following the instructions you are still not able to access your DVR, please see Section 1.6 Resolving Connection Issueslater in this chapter.
How to connect a DVR to a router?
This router can be part of an existing network of computers, or it can be the router/modem supplied by your Internet Service Provider (ISP) to connect you to the Internet. This connection will be made by plugging the included Ethernet cable into the port on the back of the DVR marked RJ45. Your DVR is not designed to be connected wirelessly to a network. It is also recommended that the router that the DVR is connected to should be connected directly to the Internet rather than to another router if Internet access is desired as multiple routers can create problems with connectivity. You will also need to have a computer connected to the same router - at least temporarily - to make certain settings. If, after following the instructions you are still not able to access your DVR, please see Section 1.6 Resolving Connection Issues later in this chapter.
How to access router on DVR?
STEP 1. On a computer connected to the same router as the DVR, open a web browser and enter the Gateway (Router’s IP address) into the browserwindow’s address bar to access your router. This address is also shown in the Network Information window
Which device has a specific IP address?
Each device on a network - both a LAN or the Internet - has a specific IP address. This
Can you reproduce a manual without permission?
Reproduction in whole or in part without written permission is prohibited. All rights reserved. This manual and software and hardware described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
What port is used for myqsee?
With phone software you usually leave off the :81, so just use your myqsee address in the address field. In the port field use 1723.
Does Q-See have a port?
For Q-See, depends on which models you have. Their original series were from TVT, which uses Super Live Pro app, this one you DO have to put the http port at the end.
Does QT support P2P?
Most of all the newer QT models are support P2P (Scan N View) now. If you know your QT model number, then just go to Q-See.com and find this model number in the support page and see if it has the firmware update to support P2P.
When selecting PPPoE as the Network type, what is the input?
When selecting PPPoE as the Network type, input the username and password provided by your internet service provider. You would use this option if you are attaching the DVR directly
Is Q-See a registered trademark?
Q-See is a registered trademark of Digital Peripheral Solutions, Inc. All other trademarks are trademarks or registered trademarks of their respective owners.
