Start AXIS Camera Station client at the remote location and click on “Secure Remote Access”. Enter the same MyAxis account credentials as the one used to enable Axis Secure Remote Access on the remote server in the previous step.
How do I set up axis secure remote access?
Go to Configuration> Connected services> Axis Secure Remote Access. 3. Sign in to your MyAxis account. Connect from the Windows app (client) 1. Open the AXIS Camera Station Windows app. How To. Connect to AXIS Camera Station 12 2. Click Axis Secure Remote Access. 3. Enter the same MyAxis account as you used when you configured the server. 4.
What is the axis camera station client?
AXIS Camera Station client: provides access to recordings, live video, logs and configuration. The client can be installed on any computer enabling remote viewing and control from anywhere on the Internet or corporate network. AXIS mobile viewing app: provides access to recordings and live video on multiple systems.
How to install the Axis video content stream application?
The application is automatically installed on new cameras added to AXIS Camera Station but can also be installed from the device management page, see Install camera application. The application enables AXIS Video Content Stream in the camera. The use of AXIS Video Content Stream is only permitted through AXIS Camera Station.
How do I install Axis video motion detection 2 and 4?
If motion recording is selected when cameras are added to AXIS Camera Station, AXIS Video Motion Detection 2 and 4 will only be installed on cameras with the required firmware. Other cameras will use the built-in motion detection. You can install the application from the device management page. See Install camera application.
How to add camera station to Axis server?
How to view Axis camera station?
What is the default port for Axis Camera Station?
Does Axis Camera Station use firewall?
Does Axis take responsibility for a configuration?
Can Axis camera station be used on domain?
See 3 more
About this website
How do I access my Axis camera remotely?
To access your site from a remote location open up AXIS Camera Companion 2.0 and log in with the same MyAxis account as used on the local site. Select the remote site, type in the site password and press Enter. You should now be connected to the site. your cameras and router up manually.
How do I connect to my Axis camera IP?
Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. ... Configure computer IP address. Set your computer's IP address to 192.168. ... Launch the Setup Axis Camera Tool. ... Setup the Camera. ... Manual Camera Configuration. ... Setup Page. ... Configure Users. ... Configure Image Settings.More items...•
How do I access Axis NVR?
0:201:26AXIS Camera Station Secure remote access - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd selects access secure remote access insert your my access account and your password. Click applyMoreAnd selects access secure remote access insert your my access account and your password. Click apply you can then enable secure remote access once secure remote access has been enabled on the server.
What is Axis remote?
Axis Secure Remote Access is a technology that makes it possible for a smartphone or PC client to access Axis network cameras when the client and the cameras are located on different local networks. Connecting to remote cameras can be a challenge, especially when the cameras are located behind routers or firewalls.
What is the default IP address of AXIS camera?
192.168.0.90The default IP address for the Axis cameras and video encoders is 192.168. 0.90.
What is the default username and password for Axis cameras?
Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation) Basler: admin/admin.
Is Axis Camera Station free?
Axis Camera Station One is a FREE software solution for the simultaneous viewing and recording of high-quality H. 264, MPEG-4 and Motion JPEG video from a single surveillance camera.
Which ports does AXIS Camera Station use?
AXIS Camera Station server to devicePortNumberProtocolMain HTTP port80TCPMain HTTPS port443TCPDefault bonjour port5353UDPDefault SSDP port1900UDP1 more row
How do I set my axis companion?
Connect your desktop app to a door stationIn the AXIS Companion desktop app, go to. > Cameras.Click Add devices and add the door station. You can now answer the door station with your AXIS Companion desktop app.
How do I connect my IP camera to the internet?
Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR. Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. The PoE switch will deliver power as well as support video transmission.
What is remote assist process for in Axis Bank?
Services Offered Axis Remote Banking Axis remote banking services lets you transfer funds, request documents, order demand drafts, pay your bills, and block your card plus a lot more.
What is Axis premium service?
Axis Remote Banking is our premium Remote Relationship offering which is designed exclusively for select customers of the Bank. You can be assured of a Dedicated Relationship Manager at your service, for taking care of all your banking and financial needs, during banking hours or even beyond them.
How do I connect my IP camera to the internet?
Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR. Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. The PoE switch will deliver power as well as support video transmission.
What port does Axis cameras use?
AXIS Camera Station server to devicePortNumberProtocolMain HTTP port80TCPMain HTTPS port443TCPDefault bonjour port5353UDPDefault SSDP port1900UDP1 more row
How to connect to a Axis camera
SMS Gateway software Ozeki brings you outstanding SMS Gateway technology. Use our SMS Server products on Windows,Linux, or Android C# SMS API Developers can use our C# SMS API to send SMS from C#.Net. The C# SMS API comes with full source code
How to setup an Axis camera for access from the Internet
Step by step setup of an Axis 207 for access from the Internet
Axis Secure Remote Access
3 1. Introduction An easy, secure and reliable way to access cameras remotely is a priority for many users of surveillance systems. However, connecting to remote cameras or recorders can be a challenge, especially when the
Which ports does AXIS Camera Station use?
Default bonjour port: 5353: UDP: Multicast (Inbound + Outbound) Used to discover devices with mDNS Discovery (Bonjour). Multicast 224.0.0.251. If unable to bind to the default port it may be because it is being used by another application which refuses to share it. In that case a random port will be tried until a working one is found.
Configuring an Axis Camera | Getting Started With the 2014 Control ...
Connect the Axis camera to the computer using an Ethernet cable. Most modern computers are equipped with auto-sensing ports and will work with a normal Ethernet cable, but a crossover cable, or network switch between the devices may be necessary for some computers.
How to add camera station to Axis server?
2. Go to Configuration> Security> User permissions. 3. In the bottom right of the window, click Add.
How to view Axis camera station?
1. Open the AXIS Camera Station Windows app. 2. Select Remote server. 3. Select a server in the list or type the IP address of the AXIS Camera Station server. If Simple Service Discovery Protocol (SSDP) is allowed on the local network you can expand the dropdown list to view all local servers.
What is the default port for Axis Camera Station?
If you run more than one server on the same network requiring port mapping, you must change the AXIS Camera Station default port (55752) . Each server must have a unique port.
Does Axis Camera Station use firewall?
During the installation, AXIS Camera Station automatically configures the Windows firewall exceptions for incoming traffic used by AXIS Camera Station. If you use a third-party firewall, you might have to request for a similar set of exceptions to be added to the configuration. In most cases only the “Inbound” port range of 55752 to 55757 requires an exception.
Does Axis take responsibility for a configuration?
Please note that AXIS doesn’t take any responsibility for how this configuration may affect your system. If the modification fails or if you get other unexpected results, you may have to restore the settings to default.
Can Axis camera station be used on domain?
AXIS Camera Station allows you to use both local Windows and domain users and user groups. If you use a domain setup, you must join the server to the domain. Your IT department might have to help you with this
What is Axis Camera Station version 5.38?
Video demonstrating some of the new user features in AXIS Camera Station version 5.38. Improvements include the additional functionality to the Door Dashboard used within the built-in access control, integration with the AXIS Licence Plate Verifier ACAP which enables the search of registration number plates, integration with the AXIS Autotracking 2 ACAP which enables automatic tracking of moving objects and finally you can now access the connected devices web interface to access the complete functionality both locally and remotely.
How long is the free trial of Axis Camera Station?
Download a free trial of AXIS Camera station and test it for 30 days: axis.com/products/axis-camera-station
What is Axis Recorder Toolbox 2.0?
The Axis Recorder Toolbox 2.0 composes of an configuration wizard and toolbox. The application helps you get started with Axis S-series Network Video Recorders and Axis S90 Workstations. Computer name, date & time and network settings are crucial for a system to work properly and the wizard helps you configure them all in a simple way. The toolbox provides links to different tools and resources, including the user manual and a way to stay up-to-date with AXIS Cameras Station and switch firmware (when applicable) when the system is online.
Can Axis camera station be connected to remote cameras?
Connecting to remote cameras can be a challenge, especially when the cameras are located behind routers or firewalls. With AXIS Camera Station Secure Remote Access it’s easy.
Can Axis T8705 be used as a decoder?
The integration of AXIS T8705 Decoder to AXIS Camera Station allows you to display video on any HDMI monitor without the need for a PC client. This is an easy way to connect additional monitors to your system such as Public View Monitors (PVMs) for deterrence or extra monitors in the staff area to keep an eye on the shop floor.
How to activate Axis Secure Remote Access?
In the Axis mobile viewing app, remote access needs to be activated first by signing in with the same MyAxis account as the one used to enable Axis Secure Remote Access on the remote server. When signed in, the total amount of relayed data used by the MyAxis account during the month will be shown.
What is live view in Axis?
The live view shows the views and cameras and live videos from the connected cameras. When connecting to multiple AXIS Camera Station servers, all the views and cameras of connected servers are displayed grouped by the server name.
What is the port 55752?
The ports 55752 (HTTP), 55754 (TCP), 55756 (mobile communication), and 55757 (mobile streaming) are used on AXIS Camera Station Server for communication between the server and the client. If required, the ports can be changed from AXIS Camera Station Service Control. See General in AXIS Camera Station Service Control.
How long does it take to renew a certificate in Axis?
Renew certificate between the server and devices: If you have configured AXIS Camera Station as a certificate authority, the client or server certificates generated by AXIS Camera Station will automatically be renewed 7 days before the expiration warning is configured to appear if you have selected Remember passphrase. If you want to renew or update a certificate manually, follow the same steps as enabling HTTPS or IEEE 802.1X.
Why is frame rate limited in live view?
The resolution and frame rate used in Live view can be limited to reduce bandwidth consumption, for example if a slow connection is used between the AXIS Camera Station client and the AXIS Camera Station server.
When is audio available on a camera?
Audio is available if the camera has audio capabilities and audio has been enabled in the profile used for the live view.
Can Axis sign certificates?
If you use an existing CA and are not willing to allow AXIS Camera Station to sign the certificates on your behalf, you have to create the certificates outside of AXIS Camera Station and manually install them on devices.
How to add camera station to Axis server?
2. Go to Configuration> Security> User permissions. 3. In the bottom right of the window, click Add.
How to view Axis camera station?
1. Open the AXIS Camera Station Windows app. 2. Select Remote server. 3. Select a server in the list or type the IP address of the AXIS Camera Station server. If Simple Service Discovery Protocol (SSDP) is allowed on the local network you can expand the dropdown list to view all local servers.
What is the default port for Axis Camera Station?
If you run more than one server on the same network requiring port mapping, you must change the AXIS Camera Station default port (55752) . Each server must have a unique port.
Does Axis Camera Station use firewall?
During the installation, AXIS Camera Station automatically configures the Windows firewall exceptions for incoming traffic used by AXIS Camera Station. If you use a third-party firewall, you might have to request for a similar set of exceptions to be added to the configuration. In most cases only the “Inbound” port range of 55752 to 55757 requires an exception.
Does Axis take responsibility for a configuration?
Please note that AXIS doesn’t take any responsibility for how this configuration may affect your system. If the modification fails or if you get other unexpected results, you may have to restore the settings to default.
Can Axis camera station be used on domain?
AXIS Camera Station allows you to use both local Windows and domain users and user groups. If you use a domain setup, you must join the server to the domain. Your IT department might have to help you with this
