Configuring Windows Server 2008 as a Remote Access SSL VPN Server (Part 2)
- Install IIS on the VPN Server. This might sound like a strange way to get things started, as I normally suggest that you...
- Request a Machine Certificate for the VPN Server using the IIS Certificate Request Wizard. The next step is to request a...
- Install the RRAS Server Role on the VPN Server. In...
- Step 1: Begin the installation. ...
- Step 2: Select Remote Desktop Services roles you want to install. ...
- Step 3: Pick the license mode. ...
- Step 4: Allow access to Remote Desktop Session Host (not required) ...
- Step 5: Configure the client experience.
How do I enable remote access to a Windows Server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet.
How do I access my Remote Desktop settings?
To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.
How do I install the remote access role on DirectAccess servers?
To install the Remote Access role on DirectAccess servers. On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.
How do I enable routing and remote access in Windows Server 2003?
Installing the Routing and Remote Access Service By default, the Routing and Remote Access service is installed automatically during the Windows Server 2003 installation, but it is disabled. To Enable the Routing and Remote Access Service Click Start, point to Administrative Tools, and then click Routing and Remote Access.
How do I enable Remote Access to a Windows server?
Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.
How do I add Remote Access to my server?
Click Start, point to Administrative Tools, and then click Routing and Remote Access. Double-click Your_Server_Name, and then click Remote Access Policies. Right-click Connections to Microsoft Routing and Remote Access server, and then click Properties. Click Grant remote access permission, and then click OK.
How do I setup a Remote Access connection?
On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection. In Remote Desktop Connection, type the name of the PC you want to connect to (from Step 1), and then select Connect.
How can I access a server from outside the network?
Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.
How do I remotely connect to another computer?
Chrome Remote Desktop is available on the web on your computer. To use your mobile device for remote access, you need to download the Chrome Remote Desktop app....Access a computer remotelyOn your Android phone or tablet, open the Chrome Remote Desktop app. ... Tap the computer you want to access from the list.More items...
How do I access another computer on the same network?
Step 1: Connect two Computers using an ethernet cable. Step 2: Click on Start->Control Panel->Network and Internet->Network and Sharing Center. Step 3: Click on option Change Advanced Sharing Settings in the upper-left side of the window. Step 4: Turn on file sharing.
How to enable remote access to a server?
To enable Remote Access, open the Routing and Remote Access console from the Administrative Tools menu, right-click the computer running Windows Server 2008 R2 that you want to host this role, and then click Configure And Enable Routing And Remote Access. Performing this action starts the Routing And Remote Access Server Setup Wizard. The configuration page of this wizard, shown in Figure 9-1, allows you to select the combination of services that this particular server will provide. The Remote Access (Dial-Up Or VPN) option is selected when you want to provide either remote access option or both options to clients outside your organization.
What is VPN in Windows Server 2008 R2?
Windows Server 2008 R2 supports four different VPN protocols: Point to Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol over IPsec (L2TP/IPsec), Secure Socket Tunneling Protocol (SSTP), and IKEv2. The factors that will influence the protocol you choose to deploy in your own network environment include client operating system, certificate infrastructure, and how your organization’s firewall is deployed.
Why use IKEv2 over VPN?
The benefit of using IKEv2 over other protocols is that it supports VPN Reconnect. When you connect to a VPN server using the PPTP, L2TP/IPsec, or SSTP protocol and you suffer a network disruption, you can lose your VPN connection and need to restart it. This often involves reentering your authentication credentials.
What is EAP TLS?
Extensible Authentication Protocol-Transport Level Security (EAP-TLS) This is the protocol that you deploy when your VPN clients are able to authenticate using smart cards or digital certificates. EAP-TLS is not supported on stand-alone servers and can be implemented only when the server hosting the RAS role service is a member of an AD DS domain.
What is VPN authentication?
VPN Authentication. A VPN is an extension of a private network that encompasses encapsulated, encrypted, and authenticated links across shared or public networks. A client connects to a public network, such as the Internet, and initiates a VPN connection to a remote server.
How to configure a RADIUS client?
To configure a RADIUS client using NPS, open the Network Policy Server console from the Administrative Tools menu. Right-click RADIUS Clients and then click New RADIUS Client. This will open the dialog box shown in Figure 9-6.
How to write log files to remote share?
Log files can be written to remote shares. This is done by specifying the UNC path of the share. If you configure this option, it will be necessary to ensure that the share permissions are configured to allow the account that writes the logs to write data to the shared folder. The Log File tab of the Local File Logging properties dialog box is shown in Figure 9-8.
How to connect to a remote system?
You can simply enter the IP of the system that you wish to connect remotely to and hit Connect or configure advanced options for managing your connection. For instance, in the General tab, login credentials can be entered to automatically login to the system that you are connecting to (e.g. Domain admin credentials). To visit Advanced Options, click Options button to expand the interface.
How to remotely connect to a computer?
To make sure that your system can remotely connect, go to Computer (My Computer) Properties from the right-click context menu to enable incoming remote desktop connections. Click on Advanced System Settings and move over to the Remote tab. From here select Allow Connections Running Remote Desktop With Network Level Authentication ...
How to access remote desktop settings?
To access your Remote Desktop settings, click on the Server Manager icon in the lower-left corner of your desktop next to your Start button. On the right side of your Server Manager window, you will see a link to Configure Remote Desktop under Computer Information. Click on this link to view your Remote Desktop settings.
Who has access to remote desktop?
Remote Desktop Users. Administrators have access by default.
Can you restrict remote desktop access to a few users?
Normally, all servers have Remote Desktop enabled for all users. While this works well, you may want to restrict remote desktop access to a few select users. To do this, click on the third option then click on the Select Users… button.
Can you modify user access for remote desktop?
All user access for Remote Desktop can be modified from here in the future. Once you see that the user is added to the list, click OK. Note that as long as Remote Desktop is enabled the Administrator account will always have access. You can then click Apply to apply the settings to the server and OK to exit the configuration.
How to install IIS Web Server 2008?
Perform the following steps on the VPN server to install the IIS Web server role: Open the Windows 2008 Server Manager. In the left pane of the console, click the Roles node. Figure 1. Click the Add Roles link on the right side of the right pane. Click Next on the Before You Begin page.
How to add a role in a server?
In the Server Manager, click the Roles node in the left pane of the console. In the Roles Summary section, click the Add Roles link. Click Next on the Before You Begin page. On the Select Server Roles page, put a checkmark in the Network Policy and Access Services checkbox.
How to access CRL distribution points?
Click the Details tab of the certificate and scroll down to the CRL Distribution Points entry and click on that entry. In the lower pane you will see the various distribution points based on the protocol used to access those points. In the certificate seen in the figure below, you can see that we need to allow the SSL VPN client access to the CRL via the URL:
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL?
How do you know what URL the SSL VPN client needs to connect to in order to download the CRL? That information is contained within certificate itself. If you go to the VPN server again and double click on the certificate in the IIS console, as you did earlier, you will be able to find this information.
Can you authenticate using a domain?
Since the VPN server is a member of the domain, you can authenticate users using domain accounts. If the VPN server were not a member of the domain, then only local accounts on the VPN server could be used, unless you decide to use the NPS server. I'll do an article on how to use an NPS server in the future.
How to access remote access server?
On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
How to install Remote Access on DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.
How to deploy DirectAccess for remote management only?
In the DirectAccess Client Setup Wizard, on the Deployment Scenario page , click Deploy DirectAccess for remote management only, and then click Next.
How to add roles and features to DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.
What group does DirectAccess belong to?
For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.
How to add domain suffix in remote access?
On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.
What is a remote access URL?
A public URL for the Remote Access server to which client computers can connect (the ConnectTo address)
How to enable remote access to a server?
Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.
How to reconfigure a server?
To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.
How to create a group VPN?
Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.
How to connect to a dial up network?
If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.
Can you grant callbacks in Windows 2003?
Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.