how to setup server 2012 for remote access

• Click Start, point to Administrative Tools, and then click Routing and Remote Access.
• In the left pane of the console, click the server that matches the local server name. ...
• Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next.
• Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet. Click Next.
• Click VPN for virtual private access, or click Dial-up for dial-up access, depending on the role you want to assign to this server.
On the VPN Connection page, click the network interface that is connected to the Internet, and then click Next.
On the IP Address Assignment page, do one of the following: If a DHCP server will be used to assign addresses to remote clients, click Automatically, and then click Next. ...
Accept the default setting of No, use Routing and Remote Access to authenticate connection requests, and then click Next.
Click Finish to enable the Routing and Remote Access service and to configure the remote access server. ...

How do I set up a remote access server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next. Click Next five times.

How do I set up a remote access server in Salesforce?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

How to configure the remote access role?

Install the Remote Access role. Configure the deployment type as DirectAccess and VPN, DirectAccess only, or VPN only. Configure the Remote Access server with the security groups that contain DirectAccess clients. Configure the Remote Access server settings. Configure the infrastructure servers that are used in the organization.

How to manage a server remotely?

Begin monitoring, control your servers remotely, and perform administration tasks as necessary. When using remote access tools for server administration, you can keep a close eye on server hardware health and troubleshoot those same servers even from remote locations.

How do I remotely access a Windows 2012 server?

To turn on Remote Web AccessOpen the Dashboard.Click Settings, and then click the Anywhere Access tab.Click Configure. The Set Up Anywhere Access Wizard appears.On the Choose Anywhere Access features to enable page, select the Remote Web Access check box.Follow the instructions to complete the wizard.

How do I setup a remote access server?

On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.

How do I know if Windows 2012 is RDP enabled?

Open the Server Manager from the taskbar/ Click on Local Server / Locate Remote Desktop under Properties which is currently Disabled, and Click on Disabled. The System Properties window will appear. Select Allow remote connections to this computer, and it's recommended to check the box below.

How can I access my server from anywhere?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How can I access my server from outside my network?

Use a VPN. If you connect to your local area network by using a virtual private network (VPN), you don't have to open your PC to the public internet. Instead, when you connect to the VPN, your RD client acts like it's part of the same network and be able to access your PC.

How do I fix remote access to the server is not enabled?

How do I fix the remote access to the server is not enabled?Modify Windows Firewall settings. ... Check Allow Remote Desktop connections. ... Reset the Remote Desktop credentials. ... Add a remote computer IP address to your host's file. ... Add RDGClientTransport key in the registry. ... Modify network properties.

What is Remote Desktop Services in Windows server 2012?

The Remote Desktop Services server role in Windows Server 2012 provides technologies that enable users to connect to virtual desktops, RemoteApp programs, and session-based desktops. With Remote Desktop Services, users can access remote connections from within a corporate network or from the Internet.

How do you check RDP is enabled or not?

Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.

What is the purpose of a Remote Access server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

What is the difference between local server and remote server?

A local server is located in the same machine as the one who made the request. A remote server is another machine that can receive and respond to exterior requests. @JayJunior it's whenever you actually do that based on the project you are working on.

How do I install Remote Access and Routing?

ProcedureOpen the Windows Server 2012 Server Manager.From the Server Manager Dashboard, select Manage > Add Roles and Features.Click Next to display the Select Server Roles window.Select the Remote Access check box. ... Click Next until the Select Role Services page is displayed.Select Routing.More items...

How to install Remote Access Server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

How to setup anywhere access?

Once the Anywhere Access Wizard has been completed, open the HOME tab on the Windows Server Essentials Dashboard . On the Get Started page, click Set up Anywhere Access , and then click Click to configure Anywhere Access . This will open the Settings page of Anywhere Access.

How to configure RWA?

To configure RWA, open the HOME tab on the Windows Server Essentials Dashboard . On the Get Started page, click Set up Anywhere Access , and then click Click to configure Anywhere Access. This will open Set up Anywhere Access wizard.

How to change remote app permissions?

If you want to change the inherent permissions of a RemoteApp, select the application-> right clickand click Edit Properties

What is RDSH in remote desktop?

Remote Desktop Session Host [RDSH]: Applications are installed and published from the Session Host servers.

What are the roles in RDS?

There are three core roles to setup a RDS environment and are as follows: 1 Remote Desktop Session Host [RDSH]: Applications are installed and published from the Session Host servers. 2 Remote Desktop Connection Broker [RDCB]: This role handles user sessions by load balancing among the RD Session Host servers. Also allows disconnected users to reconnect to their existing sessions without starting a new one. 3 Remote Desktop Web Access [RDWA]: This role provides a web portal to access the RDS environment. Also allows Windows 7 & 8 desktops to connect using the RemoteApp and Desktop Connection.

What is RDWA in Windows 7?

Remote Desktop Web Access [RDWA]:This role provides a web portal to access the RDS environment. Also allows Windows 7 & 8 desktops to connect using the RemoteApp and Desktop Connection.

How many RDS roles are there in a single VM?

In my environment I will have the three core RDS roles running on a single VM (all-in-one con. If you have a large number of users you will run through the Standard deployment where the three core services run on separate servers.

What applications are in RDS?

Once logged in you will see applications that you have access to. If you went through the Quick Setup of RDS it will have created a “Collection” that contains Calculator, MS Paint and Wordpad. Click on a application to launch it. If you get a certificate error click Continue.

What is RDG role?

The follows roles are not required but add additional abilities to RDS: Remote Desktop Gateway [RDG]: This role enables remote users to use the Remote Desktop Protocol (RDP) over HTTPS. It is placed on the edge of your network and acts as the entry point to your RDS environment externally.

What ports does a router need to forward to the IP address of Server 2012?

Port. HTTPS web traffic. TCP 443.

How to manually configure a router?

To manually configure your router. Open your Web browser, and then connect to the configuration Web page for your router. Usually the Web page is at the IP address of your router. If necessary, type your user name and password to log on to the configuration Web page.

What is the default IP address for Linksys router?

Open the Web browser on your computer and enter the address for the Linksys router in the address field. The default IP address is 192.168.1.1.

Where is the password on my router?

Some routers include a default user name, password, and IP address on the underside of the router . For more information, see the documentation for your router.

Does Windows 2012 Server Essentials support UPNP?

Check your product documentation for UPnP support. If UPnP is supported, Windows 2012 Server Essentials may be able to automatically configure your broadband router. If your router supports UPnP, ensure that UPnP is enabled. Open your Web browser, and then connect to the configuration Web page for your router.

Is the Windows Home Server wiki original?

Please note: This wiki was original built for Windows Home Server (original version) original by Microsoft documentation team and has been copied over the years to help with the newer versions. If you can help with newer images, I'd appreciate it.

Does Netgear RP614v4 support UPNP?

The Netgear RP614v4 broadband router supports UPnP – a standard that simplifies router setup. If you enable UPnP in the Netgear RP614v4, Windows Server 2012 Essentials may be able to automatically configure your remote access settings.

How to add features to remote access?

Select “remote access” and choose “add features” that are required for remote access. Also, select “include management tools.”

What is direct access in Windows 2012?

Direct access is the commercial name of Windows 2012 server’s remote access solution. In earlier versions of Windows, remote access offered limited features to the remote users. Windows 2012 is the first Microsoft server that makes remote access users feel like working within the corporate network. This post aims to show you how to install direct access in a Windows 2012 server in order to allow clients to access, and use the internal network from the Internet. Before starting the installation process, you need to meet a number of prerequisites that can be broadly divided into:

How to add ISATAP to DNS?

Manage out means you will be able to access the remote computer from your internal network. Open the forward look up zone, and right click on the right side of the panel. Select “New Host (A or AAAA) record”. Type ‘ISATAP’ under host and type IP of the internal network card of the direct access server. Next, click on “add host.”

How to enable ICMPv4 in Windows 10?

You need to allow ICMPv4 using group policy object in order to teredo use it. Open group policy management console, and right click on group policy object and click new. Name it and click ok. Now, right click on this new policy and click edit. Select computer configuration>windows settings>security settings> windows firewall>inbound rules. Right click on inbound rules and choose new rules. Click custom and click Next. Again, click on Next. From the protocol type, select icmpv4. Select ‘specific icmp types’ and then select ‘echo request’ and click ok. Click on Next. Select any ip address for both local and remote and click Next. Select ‘allow the connection’ and click Next. Then, select domain, public and private. Finally, name it and click on Finish.

How to manage out on a remote computer?

Manage out means you will be able to access the remote computer from your internal network. Open the forward look up zone, and right click on the right side of the panel. Select “New Host (A or AAAA) record”. Type ‘ISATAP’ under host and type IP of the internal network card of the direct access server.

Where is the server in a DMZ?

The server can be in the edge of the network or behind a firewall in a DMZ.

Does Windows 8 Enterprise have direct access?

Client side OS: windows 8 enterprise offers full capabilities for direct access. If you choose to install it in widows 7 ultimate or enterprise edition, you will not be able to enjoy the full functionality of DA such as geographical load balancing.

DirectAccess

DirectAccess enables remote users to securely access shared resources, Web sites, and applications on an internal network without connecting to a virtual private network (VPN). DirectAccess establishes bi-directional connectivity with an internal network every time a DirectAccess-enabled computer is connected to the Internet.

Routing and Remote Access

The Routing and Remote Access service (RRAS) supports remote user or site-to-site connectivity by using virtual private network (VPN) or dial-up connections. RRAS provides the following features.

Web Application Proxy

Web Application Proxy is a new Remote Access role service in Windows Server 2012 R2. Web Application Proxy provides reverse proxy functionality for web applications inside your corporate network to allow users on any device to access them from outside the corporate network.