hp array configuration utility remote access

by Ms. Alene Schiller Published 2 years ago Updated 2 years ago

HP Microserver Gen8 - Configure the RAID remotely

Step1 Make sure the ILO network cable is connected to your router.
Step2 Identify the IP assigned to ILO interface by your router. How to find out the IP depends on the router model. Check the router manual for details. ...
Step3 Start the server.
Step4 Login to ILO Dashboard. The default user is administrator.
Step5 Navigate to Remote Console --> Remote Console ...
Step6 ...
Step7 ...
Step8 ...

Full Answer

What is array configuration utility in hp?

Array Configuration Utility. Array Configuration Utility. ACU is a utility with the following features: Runs as a local application or remote service accessed through the HP System Management Homepage. Supports online array capacity expansion, logical drive extension, assignment of online spares, and RAID or stripe size migration.

What is the HP Smart array ACU?

The HP ACU, shown in Figure 13-1, allows both online local and remote management and configuration of an array through a browser. The ACU simplifies array configuration by providing an interface to the intelligent features of HP Smart Array controllers.

How do I enable the logical drive in hp array configuration utility?

If you select Enable,the screen lists all identified host controllers. Select the host controllers that are to have access to the logical drive, rename the connections if necessary, and then click Next. HP Array Configuration Utility User Guide 3-13

How do I use array configuration utility (ACU)?

Click Array Configuration Utilityon the left-hand side of the screen. ACU opens, and identifies the controllers that are connected to the system. This process could take a minute or two. 8. When controller detection is complete, select a controller from the list on the left-hand side of the screen.

How do I access HP Smart array Configuration Utility?

Open the browser on the remote server. The System Management Home Page opens. 3. Click Array Configuration Utility on the left-hand side of the screen.

How do I open array configuration utility?

To access ACU, use one of the following methods: If an optional controller is not installed, press F10 during boot. If an optional controller is installed, when the system recognizes the controller during POST, press F5.

How do I boot into HP Smart array?

Powering on and selecting boot options in UEFI Boot Mode Press the Power On/Standby button. During the initial boot: To modify the server configuration ROM default settings, press the F9 key in the ProLiant POSTscreen to enter the UEFI System Utilities screen.

What is an array configuration?

An array is an ordered configuration, or group, of physical devices (disk drive or flash drive modules) that is used to define logical volumes or devices. An array is a type of MDisk that is made up of disk drives; these drives are members of the array.

How do I access Hpacucli?

To use hpacucli, download and install the latest version of hpacucli rpm from the HP website on your Linux server.Two ways to execute the command. ... Display Controller and Disk Status. ... View Controller Status. ... View Drive Status. ... View Individual Drive Status. ... View All Logical Drives. ... Create New RAID 0 Logical Drive.More items...•

How do I find RAID configuration on HP server?

Re: How to check if hardware RAID is configured On hardware layer, it could be single disk or hardware raid. To see yout internal storage hardware setup, install HP ACU in windows, it will provide you GUI to check and manager whole smararray controller and disk setup.

How do I access HPE smart storage administrator?

On the local server (host), click Start, and then select Programs; Windows System; Smart Storage Administrator; Smart Storage Administrator Preferences.

How do I configure RAID?

To enable RAID, use one of the following methods, depending on your board model. Go to Configuration > SATA Drives, set Chipset SATA Mode to RAID. Go to Advanced > Drive Configuration, set Configure SATA As to RAID. Go to Advanced > Drive Configuration, set Drive Mode to Enhanced and set the RAID option to Enabled.

What is smart array?

Smart Array controllers let you designate an unlimited number of drives as online spares. Multiple arrays can have the same spare drive as a global spare. Smart Array configuration utilities ensure that SAS disk drives are only spares for SAS arrays and likewise SATA disk drives for SATA arrays.

What is disk array configuration?

An array is an ordered configuration, or group, of physical devices (drives) that is used to define logical volumes or devices. An array is a type of MDisk that is made up of disk drives; these drives are members of the array.

In which kind of array configuration the element locations must deviate or adjust to some non planar surface like an aircraft or missile?

Conformal26) In which kind of array configuration, the element locations must deviate or adjust to some nonplaner surface like an aircraft or missile? ANSWER: Conformal 27) What is the nature of radiation pattern of an isotropic antenna?

How do I boot from USB Proliant?

Setting USB Boot SupportFrom the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > USB Options > USB Boot Support and press Enter.Select a setting and press Enter. Enabled —The system can boot from USB devices connected to the server. ... Press F10.

How do I check disk status on HP ILO?

If the disks are internal, you can use the HP tools such as HPASM and HPSMH. HPASM's cpqimlview will let you see any alerts raised by ILO. HPSMH and the associated daemons will allow you to see the status of attached storage such as an MSA. These together will allow you to view the internal disk status.

What is raid10 ADM?

RAID 10 is a combination of RAID 1 and 0, providing redundancy across multiple drives. RAID 1 ADM (advanced data mirroring) uses three drives instead of RAID 1's dual drive system, allowing RAID 1 ADM to continue to operate even if two drives fail.

How do I delete raids on my HP server?

How to delete RAID array with CTRL + iTurn on the computer. ... Use the up or down arrow keys to select “Delete RAID” Volume.Use the up or down arrow keys to select the RAID volume.Press Delete to delete the volume.Press Y to confirm the deletion.

How to install ACU on HP?

Download ACU from the HP website or from the CD that is supplied with the controller, and then install it onto the server.

What is ACU remote service?

Local Application mode Remote Service mode ACU is installed as an executable application. ACU is installed as a service that starts when the server is powered up. ACU runs only on the local system and cannot be run remotely. A browser is used to render the user interface, but no Web server is required. ACU can be run remotely from another server across a network. Authentication is handled by the operating system, ensuring that the user is an administrator on the server running ACU. Authentication is handled through the same mechanism used for Systems Insight Manager agents.

What is Express Configuration Mode?

NOTE:Express mode is listed as a configuration option only if the controller that you select has unused space on an array or physical drives that are not assigned to an array. Express Configuration mode screens are similar in appearance to Configuration Wizards mode screens ("Typical Configuration Wizards mode screen" on page 11), but the directive text is different. In Express Configuration mode, ACU asks you a few simple questions about your configuration preferences and then automatically sets up the optimum configuration based on your answers.

How many configuration modes are there in ACU?

The GUI format of ACU has three configuration modes:

How long does it take to connect an ACU to a computer?

The browser opens and launches ACU, which then identifies the controllers that are connected to the system. This process could take a minute or two.

What does a + in the appropriate column mean?

NOTE:A + in the appropriate column indicates that the feature or procedure is supported, while -- indicates that the feature or procedure is not supported.

Is advanced task available in all operating modes?

NOTE:Some advanced tasks are not available in all operating modes. For further information, refer to "Tasks possible in each operating mode ("Selecting an operating mode" on page 7)."

How to contact HP authorized reseller?

Authorized Reseller . For the name of your nearest authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. • Elsewhere, see the HP website for locations and telephone numbers.

Where is the configuration view window on ACU?

All the configuration options for a selected item in the Configuration Viewwindow are displayed in a frame on the right-hand side of the screen.

How does ACU work?

ACU is installed as an executable application. ACU is installed as a service that starts when the server is powered up . ACU runs only on the local system, and cannot be run remotely. A web browser is used to render the user interface, but no web server is required. ACU can be run remotely from another server across a network. Authentication is handled by the operating system, ensuring that the user is an administrator on the server running ACU. Authentication is handled through the same mechanism used for Insight Manager agents.

What is standard mode on ACU?

The appearance of a typical ACU screen after this point depends on which of the three possible configuration modes you choose. • Standardmode is the default setting. This mode lets you manually configure all options on the controller. • Configuration Wizardsmode guides you through each step of a manual configuration process. • Express Configurationmode allows ACU to automatically configure the controller after you have answered a few simple questions. ACU uses your answers to the questions to determine the optimum default values that it should use for certain configuration options.

How to assign spare drive in ACU?

If you select a fault-tolerant RAID method, and an unassigned physical drive of the appropriate capacity is available, ACU asks if you want to assign a spare drive. Select a drive to be the spare, and then click Next.

How to configure ACU?

You can access ACU in three ways: — As a local application — As a remote service — Through Insight Manager Each method for opening ACU involves a different technique. Details of the required technique for each method are given after this summary. 2. Select the controller that you want to configure. 3. If you want to use a Wizard, select it from the panel in the lower right-hand corner of the screen. 4. Configure the controller. 5. Save the configuration changes. 6. Select another controller to configure, or exit ACU.

Where to download ACU Smart Component?

Download the ACU Smart Component from the HP website or from the CD that is supplied with the controller, and then install the Smart Component onto the server.

Prerequisites

First you need the HPE SSACLI tool that is install as a VIB (vSphere Installable Bundle).

Raid Configuration

In this scenario, I will now configure a Raid 5 with a HotSpare hard disk.

How many drives can be in an HP Smart Array?

If disks of higher capacity are installed within a single array, the extra capacity will not be available. Up to 32 logical drives can be defined with any HP Smart Array controller. Some operating systems support fewer than 32 logical drives.

What is HP ACU?

What is assisted configuration?

Assisted Configuration — Enables you to configure the controllers using the Configuration Wizard manually

What is an ADU in HP?

The ADU displays a detailed analysis of the system configuration. If the cause of a problem is still not apparent, the ADU can generate a full report that administrators can fax or e-mail to HP customer service for phone support.

Does HP Smart Array support ORCA?

Only the newest HP Smart Array controller models support ORCA. All other HP Smart Array controllers only support ACU. The HP RAID LC2 controller can be configured with ORCA only.