How does the HP microserver remote access card work?
HP MicroServer Remote Access Card The operating system has the BMC Setup function when the IPMI card is installed into the server. By BIOS default, the server exports the VGA port through the VGA connector on the IPMI card automatically when the IPMI card is plugged.
What is the HP ProLiant microserver user guide?
Index HP ProLiant MicroServer User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
What should I do if my ProLiant microserver is displaying error messages?
Be sure there are no operating system errors indicated. Restart the server and check to see if the error message is still displayed. Run ProLiant MicroServer Insight Diagnostics (on page 32).
How many pages are in the HP ProLiant installation manual?
Related Manuals for HP ProLiant MicroServer Server HP ProLiant MicroServer Installation Sheet (9 pages) Server HP ProLiant ML350 Generation 5 Specification (44 pages) Server HP ProLiant ML330 Generation 3 Specification (34 pages) Server HP ProLiant Moonshot Specification Hp proliant moonshot server (21 pages)
How to access redundant ROM?
To access redundant ROM, set S1, S5, and S6 to on. When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all system configuration settings from both CMOS and NVRAM.
Why remove power cord from server?
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.
