| Developer | IBM |
| OS family | RACS |
| Working state | Discontinued |
| Initial release | 1966; 55 years ago ( 1966) |
| Marketing target | IBM mainframe computers |
Full Answer
How do I enable remote access for a user?
Ensure each user is enabled for remote access Newly created user profiles must be enabled for remote access. In the navigation panel, select HMC Management, and then click Manage User Profiles and Access. Select the desired user profile and click the menu option User, Modify. On the Modify User dialog, click the User Properties... button.
How do I enable remote operation of the web-based system manager (websm)?
The Web-based System Manager (WebSM) client is no longer supported. This document assumes that the HMC has at least one Ethernet adapter that has been configured for network access. 1. Enable remote operation In the navigation panel, click HMC Management, then click Remote Operation. Check the box to enable remote operation and click OK. 2.
How do I enable secure remote access on a LAN adapter?
In the navigation panel, select HMC Management, and then click Change Network Settings. Click the LAN Adapter tab, select the adapter configured for remote access (normally eth1), and then click the Details button. On the LAN Adapter Details dialog, click the Firewall tab. In the upper list box, select Secure Remote Web Access 443:tcp 9960:tcp.
Does the HMC allow remote access using a web browser?
Version 7 and later of the HMC allow remote access using a Web browser. The Web-based System Manager (WebSM) client is no longer supported. This document assumes that the HMC has at least one Ethernet adapter that has been configured for network access. 1. Enable remote operation
How do I connect to a remote office network?
How does it work?Download your firewall's VPN client software - usually available for free from the vendors website (SonicWall, Checkpoint, WatchGuard, Meraki, etc).Install the software.Enter your organisation's public IP address.Enter your username and password and connect.
What is remote access mode?
Remote access control refers to the ability to monitor and control access to a computer or network (such as a home computer or office network computer) anywhere and anytime. Employees can leverage this ability to work remotely away from the office while retaining access to a distant computer or network.
How much does IT cost for remote access?
For remote access software, your pricing model will typically be a “per user per month” scenario. On average, you should expect to pay around $5 per user per month.
What is remote access examples?
Accessing, writing to and reading from, files that are not local to a computer can be considered remote access. For example, storing and access files in the cloud grants remote access to a network that stores those files. Examples of include services such as Dropbox, Microsoft One Drive, and Google Drive.
Can someone remotely access my computer without my knowledge?
"Can someone access my computer remotely without me knowing?" The answer is "Yes!". This could happen when you are connected to the internet on your device.
Can you tell if someone is remotely accessing your computer?
You can use the Windows Task Manager on your computer to assess whether any programs have been opened on your computer without your knowledge. If you see programs in use that you did not execute, this is a strong indication that remote access has occurred.
Is Microsoft RDP free?
Microsoft Remote Desktop With the platform—which Microsoft provides for free—you can remotely access Windows PCs from other Windows computers, mobile, devices, and Macs.
What is the best way to remotely access a computer?
How to use Remote DesktopSet up the PC you want to connect to so it allows remote connections: Make sure you have Windows 11 Pro. ... Use Remote Desktop to connect to the PC you set up: On your local Windows PC: In the search box on the taskbar, type Remote Desktop Connection, and then select Remote Desktop Connection.
Which software is best for remote access?
Best Remote Desktop Software of 2022Best Overall: ISL Online.Best for One User or Small Teams: LogMeIn.Best for Large Companies: RemotePC.Best Free Software: Chrome Remote Desktop.Best Value: Zoho Assist.Best for Mobile Access: Parallels Access.Best for Team Collaboration: TeamViewer.
Who uses remote access?
Technical support professionals can use remote access to connect to users' computers from remote locations to help them resolve issues with their systems or software. One common method of providing remote access is via a remote access virtual private network (VPN) connection.
What are the different types of remote access?
The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Remote Access Services (RAS), and Remote Desktop Protocol (RDP).
Is remote access safe?
However, remote access is also necessary for IT technicians to provide timely support, conduct routine updates, and reduce the cost of location visits. Furthermore, while it may seem like a security breach to grant remote control over your systems, it's actually no less secure than allowing someone to log-on in person.
Is remote access safe?
Remote access solutions could leave you vulnerable. If you don't have proper security solutions in place, remote connections could act as a gateway for cybercriminals to access your devices and data. Hackers could use remote desktop protocol (RDP) to remotely access Windows computers in particular.
What is remote access on Samsung TV?
Remote Access allows users to directly control their devices connected to a TV with a keyboard and mouse in addition to simply displaying the content on a larger screen.
How do you take remote access?
How to use Remote DesktopMake sure you have Windows 11 Pro. To check this, select Start , and open Settings . ... When you're ready, select Start , and open Settings . Then, under System , select Remote Desktop, set Remote Desktop to On, and then select Confirm.Make note of the name of this PC under PC name.
What are the types of remote access?
The primary remote access protocols in use today are the Serial Line Internet Protocol (SLIP), Point-to-Point Protocol (PPP), Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Remote Access Services (RAS), and Remote Desktop Protocol (RDP).
Hardware
RAX was available from IBM as program number 360A-CX-17X, and runs on System/360 Model 30 and above. As announced, it runs on systems with as little as 64 KB of main storage, and supports a mix of up to 63 IBM 1050 typewriter terminals and IBM 2260 display terminals. The languages supported are BASIC, FORTRAN IV, and IBM Basic assembly language.
Users
In 1968 RAX was used by the United States Department of Agriculture for their Washington Data Processing Center. It was used in a number of colleges, universities, and corporations, including McGill, Boston University, St. Andrew's in Scotland, The University of Rhode Island, and Bell Aerosystems.
What is IBM DB2?
The IBM DB2 for i .NET provider (named IBM.Data.DB2.iSeries) allows Windows applications to use the Microsoft .NET Framework to access DB2 for i databases.
Does IBM support i Access?
IBM does not plan to support IBM i Access for Windows on operating systems beyond Windows 8.1. For additional information see supported Windows operating systems and End-of-Service plans. The replacement product is IBM i Access Client Solutions, which includes 5250 emulation, data transfer, printer output, console support, and more.
Is IBM 5770 XE1 supported?
Effective April 30, 2019, IBM® has withdrawn support for 5770-XE1 IBM i Access for Windows ™ 7.1. IBM i Access for Windows 7.1. was delivered with IBM i 7.3, 7.2, and 7.1. Extended support will not be available.
How to enable remote access to HMC?
Enable remote operation. In the navigation panel, click HMC Management, then click Remote Operation. Check the box to enable remote operation and click OK. 2. Enable remote Web access in the firewall. In the navigation panel, select HMC Management, and then click Change Network Settings.
What ports does IBM fix?
The list of supported browser versions can be found in the HMC release readme files, available in IBM Fix Central. Remote access requires ports 443 and 9960. 9960 is required for remote access using Internet Explorer and for java applets such as remote vterm in all browsers.
How to change HMC management?
In the navigation panel, select HMC Management, and then click Manage User Profiles and Access. Select the desired user profile and click the menu option User, Modify. On the Modify User dialog, click the User Properties... button. Check the box for Allow remote access via the web. Click OK, OK to save the change.
Does HMC support WebSM?
Version 7 and later of the HMC allow remote access using a Web browser. The Web-based System Manager (WebSM) client is no longer supported. This document assumes that the HMC has at least one Ethernet adapter that has been configured for network access.
Updates
The current version is available for download at IBM i Access Client Solutions base package.
Optional platform-specific packages
IBM i Access Client Solutions - Windows Application Package for Windows.
Prerequisites
Call home must be configured and functioning with a valid email server. To configure call home, select Settings > Notifications > Email in the management GUI or via system setup.
Using the management GUI
In the management GUI, select Settings > Support > Support Assistance > Set Up Remote Support.
Using the command-line interface
In certain situations, the Remote Support Proxy utility must be installed.
Problem
User launches Controller client. User receives an error. The problem may not affect all client devices. For example there may be some PCs where the Controller client successfully launches OK.
Symptom
An error occurred while trying to access the server. http ://<servername>/ibmcognos/controllerserver
Cause
The client device (where the Controller client CCR.EXE is running) cannot resole the server name to an IP address. More Details There are several possible causes for why a client device (for example the end user's Windows 7 PC/laptop) cannot resolve the name of the server to an IP address, for example:
Environment
This problem will most likely occur for client devices which are remote (located inside a different location from where the Controller application server is).
Resolving The Problem
Scenario #1 - Client device cannot resolve the server's name to an IP address.
