What information can I find on the icamera2's network settings?
Network MAC Address The current IP address of the iCamera2. IP Address The IP Address of the Network Camera. Network Mask The network mask associated with the IP address above. Gateway The IP Address of the remote Gateway associated with the IP Address above.
What is icamera2 wireless IP camera?
Furthermore, with the built-in infrared LEDs, the Wireless IP camera can provide illumination around 5 meters long under low light conditions in a simple, economical manner. Features • Standalone Design. The iCamera2 is a standalone system with built-in CPU and Video encoder.
How do I connect the icamera2 to a LAN network?
Connecting to a Camera on your LAN To establish a connection from your PC to the iCamera2: 1. Start Internet Explorer. 2. In the Address box, enter "HTTP://" and the IP Address of the iCamera2. 3.
What can I do with the icamera2?
The iCamera2 can support H.264 and MJEPG video for different image compression. • Stream Live Video to Multiple Users. The video encoder and HTTP server built into the camera generate a ready-to-view video stream.
How to access icamera2?
What is the IP address of the icamera2?
How to set up WEP key?
How far apart must an antenna be from a transmitter?
How to add icamera2 to bookmarks?
How to connect icamera to internet?
What port does the icamera2 use?
See more
How do I access iCamera2?
Enter the Internet address of the Router/Gateway, and its port number, in the Address (or Location) field of your Browser. Example - IP address: HTTP://203.70.212.52:1024 Where the Router/Gateway's Internet IP address is 203.70. 212.52 and the "Secondary Port" number on the iCamera2 is 1024.
What brand is iCamera2?
Sercomm CorpXfinity/ADT Wireless Indoor/Outdoor IControl iCamera2Indoor/Outdoor UsageOutdoor, IndoorBrandSercomm CorpConnectivity TechnologyWireless, WiredSpecial FeatureNight Vision, Motion SensorPower SourceBattery Powered
How do I connect my iCamera 1000?
Connect the camera to the Device Port of the gateway using the Ethernet cable (attached to the Y-Cable.) 9. Connect the supplied 12V power adapter to power up the iCamera, and then click the Continue button. NOTE: Please wait several minutes while the iCamera is being added to the network.
How do you reset ICAM 1000?
0:0612:25How to access iCamera1 or 1000 and iCamera2 when locked ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is an AI camera 1000. This also goes for the same as the AI camera - these 2 models are used byMoreThis is an AI camera 1000. This also goes for the same as the AI camera - these 2 models are used by ADT and comcast cable for their home security system if you don't have their home security system a
What app does the iCamera2 use?
The iCamera2 offers live video, Continuous Video Recording (CVR), and one-way audio. The camera must be connected to the network via the Homelife mobile app or Homelife Touchscreen control panel.
What devices work with Cox homelife?
Wireless KeypadSmart Door Lock. x. Lock/unlock doors or set automation Rules, like having the lights turn off when you lock the door. ... HD Camera. x. Check live video, snap pics and record clips through the Homelife App. ... Door/Window Sensor. x. ... Motion Sensor. x. ... Yard Signs. x. ... Wireless Keypad. x.
How do I connect to my Xfinity camera without service?
Xfinity Home Security lets you own the camera so that you can use it without Service. Disconnect and Reset all the devices in the Xfinity Network and hook it up to your new local network to start using it without service.
How do I use my old Cox camera?
Re: Use Old Cox, Xfinity or other Cable Company Security Cam You plug it into the AC power and the cable from the router to one end of it, then plug the cable from the camera into the other end. This will put the DC power onto the ethernet cable for the camera to extract and use.
How do I connect my Cox camera to WIFI?
From the Manage Devices screen, tap Add Devices. From the Add Devices screen, select Cameras. Follow the instructions on the screen to power up and then pair your HD camera. Locate the WPS button on the customer's Wi-Fi router and press it to begin the wireless pairing process.
How do I reset my ICAM 2?
Use a non-metallic pointed object (such as a toothpick) to press the reset button on the back of the Camera and hold it down for 10 seconds. When you release the button, the Power light will blink once. Wait for it to turn solid. This can take up to three minutes.
How to access icamera2?
1. Connect to the Web-based interface of the iCamera2. (See Chapter 5 - Web-based Management for details.) 2. Select Administration, then Video Access. 3. Set the desired options for Access. Access Select the desired option as required:
What is the IP address of the icamera2?
HTTP://203.70.212.52:1024 Where the Router/Gateway's Internet IP address is 203.70.212.52 and the "Secondary Port" number on the iCamera2 is 1024. 21 Motion Detection Alerts The Motion Detection feature can generate an Alert when motion is detected. The iCamera2 will compare consecutive frames to detect changes caused by the movement of large objects. But the motion detector can also be triggered by:
How to set up WEP key?
Enter a word or group of printable characters in the Passphrase box and click the "Generate Key" button to automatically configure the WEP Key (s). If encryption strength is set to 64-bit, then each of the four key fields will be populated with key values. If encryption strength is set to 128-bit, then only the selected WEP key field will be given a key value. Use the radio buttons to select the default key. Enter the key value you wish to use. Other stations must have the same key values. Keys must be entered in Hex. Hex characters are the digits (0 ~
How far apart must an antenna be from a transmitter?
Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter procedures. End users must be informed of the requirements for satisfying RF Exposure compliance
How to add icamera2 to bookmarks?
Once connected, you can add the iCamera2 to your Browser's Favorites or Bookmarks. Connecting using your Web Browser 1. Start your WEB browser. 2. In the Address box, enter "HTTP://" and the IP Address of the iCamera2. 3. You will then be prompted for a username and password. If using the default values, enter administrator for the name, and leave the password blank. Otherwise, enter the Administrator ID and Administrator Password set on the Maintenance screen. 23 Welcome Screen When you connect, the following screen will be displayed. Figure 13: Welcome Screen The menu options available from this screen are:
How to connect icamera to internet?
1. Start Internet Explorer. 2. 3. When you connect, the following screen will be displayed. In the Address box, enter "HTTP://" and the IP Address of the iCamera2. 10 Figure 5: Home Screen 4. Click View Video. 5. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the iCamera2 administrator. 6. The first time you connect to the camera, you will be prompted to install decoders. Choose "I accept the terms of the license agreement" and click "OK". 7. Video will start playing automatically. There may be a delay of a few seconds while the video stream is buffered. 11 Connecting to a Camera via the Internet You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the camera and the Internet Gateway/Router used by the camera. See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration. Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported. To establish a connection from your PC to the iCamera2 via the Internet:
What port does the icamera2 use?
You wish to change the port number from the default value. HTTPS Port Configuration Normally, HTTP (Web) connections use port 80. Since the iCamera2 uses HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the iCamera2. This port is called the Secondary Port. The default HTTP/HTTPS Secondary Port is 1025. If you prefer to use a different port number, you can specify the port number on the iCamera2's Network screen, as shown below. Figure 11: Network Screen See Chapter 5 - Web-based Management for further details on using the Network screen. Viewers need to know this port number in order to connect and view live Video, so you must inform viewers of the correct port number. 20 Viewing Live Video via the Internet Clients (viewers) will also need a broadband connection; dial-up connections are NOT recommended. Viewing Live Video Using your Web Browser If using your Web browser, you need to know the Internet IP address (or the Domain name) of the camera's Router/Gateway, and the correct port number. Enter the Internet address of the Router/Gateway, and its port number, in the Address (or Location) field of your Browser. Example - IP address:
How to access my camera remotely?
If you are fortunate enough to have a static IP address, you can always access your camera remotely using the IP address of the Internet connection (20 7.5.23.205 in our example) where your camera is installed. If your Internet IP address is dynamic, you should setup a DDNS service to manage changes in your IP address.
How to remotely view IP cameras?
The most common way to enable remote viewing to IP cameras is by manually setting up port forwarding on the network router that the camera is connected to. UPnP (universal plug-and-play) is a newer method that is supported by some routers and cameras but is not as reliable in my experience. This article explains ports forwarding and dynamic DNS – two concepts to understand if you want to access security cameras remotely. Setting up port forwarding for multiple IP cameras is also covered.
Why is it important to reserving IP addresses?
This is important because your port forwarding rule that you will setup will not work if the IP address of the camera changes.
How to login to IP camera?
Using a computer on the same network as your IP camera, login to your IP camera. IN our example, we are using a laptop on the local network with IP address 192.168.0.2. Most IP cameras have an interface that can be accessed via web browser. In our example, would enter the following address into the web browser of the laptop on the right. https://192.168.0.101:7000. If the address and port is correct, you will most likely be prompt for a user ID and password by your camera.
What port is my IP camera?
Our IP camera is running on port 7000. Please note that different IP camera manufacturers use different default ports. Check your manual to confirm the port that your camera uses. Please note that you can change your camera’s port when you login to it.
What port does the second IP camera use?
The second IP camera uses the same port as the first one, 7000.
Do IP cameras use the same port?
The IP cameras are the same brand, maybe even the same model – so they use the same port. This is how you can setup port forwarding for multiple IP cameras running on the same port. Here is the same diagram that was used in the first explanation except a second IP camera was added to the network.
Why is remote access important for security cameras?
Remote access is often a key factor when choosing a security camera. The ability to monitor a location remotely is a huge benefit for most and is often the main reason for selecting an IP camera.
Why is my camera not working on the same router?
This is often not possible due to NAT loopback. NAT loopback happens when you try to access a local device using the external IP address or domain name.
How to find the IP address of a router?
To access this information in Windows XP, go to the Start menu and click on “Run”. In the box that opens, enter “cmd” and click “OK”. In Windows Vista and Windows 7, click the Windows icon and in the search box enter “cmd” and press enter.
How to find my external IP address?
To get the current external IP address of your router, go to www.mycamip.com. Watch out though as this may change. See dynamic DNS below for details.
Do I need a static IP address for a webcam?
We get the same question a lot here at Network Webcams Tech HQ; do I need a static IP address on my internet connection? The answer in most occasions is no. Most cameras come with a dynamic DNS client which allows you to set up a unique name which will always point to your current IP address.
Can VPNs be connected to IP cameras?
VPNs come in many shapes and sizes and can even be connected directly to and from IP cameras (such as Axis cameras with their ACAP platform). 9. Troubleshooting. No matter how many times you have set up port forwarding sometimes things do go awry.
How to set up a camera for remote viewing?
Step 1: First, download the superlive plus or any preferred app on your mac or phones, or computers. Step 2: Now launch the downloaded app. After successfully launching the app, enter a unique ID number or shortly known as UID, to add your camera device to the app. ...
How to find my IP address on my security camera?
To find your camera IP address, first launch the security camera approved Client on your computer. Then log into the camera. Now click on “Device Settings”. From here go to “Network” and then go to “Status”. Here you will find the IP address.
How to view my security camera?
Step 1: Find Your Security Camera’s IP Address. In order to view your security cameras from anywhere, find your camera IP address. This is the first thing you need to do. Generally, every software of security cameras has a page that shows the network status as well as the security camera’s IP address.
Is There Any Security Risks Associated with IP Camera Set Up via UID method for Remote Viewing?
Well, no need to fear. This is because there is no security risk associated with an IP camera for remote viewing. Although Peer to Peer applications have some types of safety vulnerabilities, manufacturers use powerful encryption technology to stop exposure to user’s privacy.
How to add a camera to a router?
Step 1. Log into your router’s management page (http://www.tp-link.us/faq-87.html). Go to Forwarding > Virtual Servers and click Add New. Step 2. Type the IP address and the port used by the camera in the corresponding field. For the Protocol, we recommend you select ALL.
What port is used for the camera?
Port 3333 can now be used by the camera.
How to find the HTTP port number on a camera?
Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera. The default is 80.
How to access icamera2?
1. Connect to the Web-based interface of the iCamera2. (See Chapter 5 - Web-based Management for details.) 2. Select Administration, then Video Access. 3. Set the desired options for Access. Access Select the desired option as required:
What is the IP address of the icamera2?
HTTP://203.70.212.52:1024 Where the Router/Gateway's Internet IP address is 203.70.212.52 and the "Secondary Port" number on the iCamera2 is 1024. 21 Motion Detection Alerts The Motion Detection feature can generate an Alert when motion is detected. The iCamera2 will compare consecutive frames to detect changes caused by the movement of large objects. But the motion detector can also be triggered by:
How to set up WEP key?
Enter a word or group of printable characters in the Passphrase box and click the "Generate Key" button to automatically configure the WEP Key (s). If encryption strength is set to 64-bit, then each of the four key fields will be populated with key values. If encryption strength is set to 128-bit, then only the selected WEP key field will be given a key value. Use the radio buttons to select the default key. Enter the key value you wish to use. Other stations must have the same key values. Keys must be entered in Hex. Hex characters are the digits (0 ~
How far apart must an antenna be from a transmitter?
Output power is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter procedures. End users must be informed of the requirements for satisfying RF Exposure compliance
How to add icamera2 to bookmarks?
Once connected, you can add the iCamera2 to your Browser's Favorites or Bookmarks. Connecting using your Web Browser 1. Start your WEB browser. 2. In the Address box, enter "HTTP://" and the IP Address of the iCamera2. 3. You will then be prompted for a username and password. If using the default values, enter administrator for the name, and leave the password blank. Otherwise, enter the Administrator ID and Administrator Password set on the Maintenance screen. 23 Welcome Screen When you connect, the following screen will be displayed. Figure 13: Welcome Screen The menu options available from this screen are:
How to connect icamera to internet?
1. Start Internet Explorer. 2. 3. When you connect, the following screen will be displayed. In the Address box, enter "HTTP://" and the IP Address of the iCamera2. 10 Figure 5: Home Screen 4. Click View Video. 5. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the iCamera2 administrator. 6. The first time you connect to the camera, you will be prompted to install decoders. Choose "I accept the terms of the license agreement" and click "OK". 7. Video will start playing automatically. There may be a delay of a few seconds while the video stream is buffered. 11 Connecting to a Camera via the Internet You can NOT connect to a camera via the Internet unless the camera Administrator has configured both the camera and the Internet Gateway/Router used by the camera. See Making Video available from the Internet in Chapter 4 - Advanced Viewing Setup for details of the required configuration. Also, you need a broadband Internet connection to view video effectively. Dial-up connections are NOT supported. To establish a connection from your PC to the iCamera2 via the Internet:
What port does the icamera2 use?
You wish to change the port number from the default value. HTTPS Port Configuration Normally, HTTP (Web) connections use port 80. Since the iCamera2 uses HTTP, but port 80 is likely to be used by a Web Server, you can use a different port for the iCamera2. This port is called the Secondary Port. The default HTTP/HTTPS Secondary Port is 1025. If you prefer to use a different port number, you can specify the port number on the iCamera2's Network screen, as shown below. Figure 11: Network Screen See Chapter 5 - Web-based Management for further details on using the Network screen. Viewers need to know this port number in order to connect and view live Video, so you must inform viewers of the correct port number. 20 Viewing Live Video via the Internet Clients (viewers) will also need a broadband connection; dial-up connections are NOT recommended. Viewing Live Video Using your Web Browser If using your Web browser, you need to know the Internet IP address (or the Domain name) of the camera's Router/Gateway, and the correct port number. Enter the Internet address of the Router/Gateway, and its port number, in the Address (or Location) field of your Browser. Example - IP address:
