Remote accessto a IINET BOB2 router via the internet, is this possible? Yep. Log in to the modem via http://10.1.1.1 and then choose "Advanced Settings" from along the top menu.
Full Answer
Is it possible to access remote access to a iiNet Bob2 router?
Remote accessto a IINET BOB2 router via the internet, is this possible? Yep. Log in to the modem via http://10.1.1.1 and then choose "Advanced Settings" from along the top menu. Before/during this, it's strongly recommended you change the modem's login password on the same page.
How do I open a port on my iiNet Bob Lite?
The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your iiNet BoB Lite router. Navigate to the port forwarding section. Click the Advanced Settings button. Click on Port Forwarding. Create a port forward entry.
How do I enable port forwarding on my iiNet Bob router?
Setup a static IP address on either your computer or device that you want to forward a port to. Login to your iiNet BoB router. Navigate to the port forwarding section. Click the NAT link. Click on Port Forwarding. Create a port forward entry.
Why do I need to open a port through iiNet Bob_Lite?
iiNet BoB_Lite routers include a very basic firewall that helps protect your home network form unwanted access from the internet. Since this firewall blocks incoming connections you may need open a port through it for certain games and applications.
How do I access my iiNet router?
On a device that's connected to your modem, open your web browser and go to http://10.1.1.1.For TG-1s: Log in with the default username "admin" and default password “admin”, or use your custom login details. ... On the dashboard, make sure the switch in the corner of the Wireless panel is set to ON.More items...
What is the WPS button on iiNet router?
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy, yet secure way, without the need to enter any of your wireless settings manually.
What is the IP address for iiNet?
Type 10.1. 1.1 (the most common IP for iiNet routers) in the address bar of your web browser to access the router's web-based user interface.
Can I use my iiNet modem with another provider?
Luckily, iiNet are pretty good at allowing the modem to be used with other ISPs, with no drastic steps to overcome.
What is the default password for a iiNet router?
For modems purchased from iiNet, the default username and password are both typically “admin”.
How do I connect my phone to my iiNet modem?
Press the connect a phone handset to your modem's Power button on the back of the modem to turn Phone1 port. 2. Use the supplied Ethernet cable to connect your connect your computer to any of your modem's 4 modem's red WAN port to the UNI-D 1 port on LAN ports.
How do I access my modem settings?
What to Know. Connect your computer to your modem with an Ethernet cable, open a browser and enter your modem's IP address in the URL bar. The default user name (sometimes listed as SSID) and password are typically printed on the bottom of the modem.
What is the modem IP address?
1.1 is the common IP address that is used by many modems and routers nowadays. It's a default IP address where you can access your modem or wireless router to change settings, change the WiFi name or password. Sometimes, your modem or router may use a different IP address, such as 192.168.
What connection type is iiNet?
Modems must support VDSL2 or VLAN....NBN™ FTTB/FTTN.Internet Service Provider (ISP):Other (Do not select "iiNet")DSL Standard/Mode/Modulation:VDSL2Connection Type/Mode/WAN Type:PPPoE13 more rows
Do you have to use the router provided by your Internet provider?
Do I Have to Use the Router Provided by My ISP? If you want to replace your ISP's equipment, you may wonder if your ISP forces you to use their router. The answer is no, but sometimes sticking to your ISP's router will make things easier.
Can any modem work with any provider?
Many service providers allow you to rent a modem from them to ensure that it works properly. However, not all modems will work with all Internet providers -- certain types of service require certain types of hardware. Many modems are too out-of-date or lack the correct components to function properly.
Can you use iiNet modem with TPG?
Welcome to TPG Community! It is possible to use the old iiNet modem as long as it is compatible with your NBN FTTN service. If your friend was using it for their NBN FTTN service before, then there are settings on the modem that is needed to be changed for it to work with us.
How do I reset my iinet modem?
While the modem is turned on, find the Reset button on the back of your modem. Using a pen or paperclip, hold the reset button for 6 to 8 seconds ONLY then release the button. All lights will briefly illuminate and then the modem will reboot with factory default settings.
Why is my iinet modem Status Red?
Note: If your NBN™ Connection Box STATUS light is red after rebooting, please call us on 13 22 58 for assistance. Stand next to your modem to rule out any WiFi signal issues. Move further away and monitor the WiFi signal strength.
How do I connect my Technicolor modem?
Setup Modem - Ethernet Cable/Wireless with COMPUTEROpen a web browser, on the Address Bar Type:192.168.1.254.Click Home -> Internet on the Modem Main page.Click "Disconnect"IN CASE the button isn't showing "Connect" (Optional)Input your internet login Username & Password. Then, click "Connect"Congratulations!
How do I remove a device from iinet WiFi?
If your connection is currently online, you'll see a summary at the top of the page. You can click Remote disconnect to disconnect your internet connection through Toolbox (requires your broadband password).
How much money was lost in remote access scams in 2017?
In 2017 alone, the Australian Competition & Consumer Commission (ACCC)’s Scamwatchreported over $2 million lost to Remote Access scamsand the amount lost each month has continued to rise.
What happens if a scammer gets remote access?
If the scammer does manage to get a Remote Access connection to a computer, then things get really serious. With full control of your computer, it’s possible they might Install viruses or other malicious software (malware) on your computer, such as:
Is remote access good?
Remote Access is a great tool if you know what you’re doing with it and you trust the source. However, you should be very suspicious of anyoneasking you to accept a Remote Access connection out of the blue.
Is Iinet good for seniors?
Yes great work iinet especially for us senior citizens. This article is very easy to understand and makes us feel a lot more secure in knowing how to handle this situation if it occurs.
What operating system does BoB Lite work on?
BoB Lite™ supports a variety of operating systems including Mac OS® 8.x, 9.x & 10.x, Linux®, Windows® 98SE, ME, NT, 2000, XP, Vista, 7 & 8. You will need an internet browser and a network adapter that supports TCP/IP (the standard language of the internet).
What is a NAT in a BoB Lite?
BoB Lite™ employs Network Address Translation (NAT) to share the single IP address he uses to get you online with the other computers on your home network. This saves the cost of adding additional IP addresses to your account.
How many USB ports does a Bob Lite have?
BoB Lite™ has three USB ports. The USB labelled storage/charger can be used to charge USB devices such as mobile phones, or you can plug in a USB hard drive (FATI6, FAT32 or NTFS, up to 1TB) to back up and share files around your home network. Please note that file transfer speeds may not be as fast as a traditional Network Attached Storage (NAS) device and that the power output from the USB drive may be insufficient for high performance devices. To allow users outside your home network to access the hard drive, you’ll need to enable the remote access feature under the appropriate storage section.
Where is the third USB port on a BoB Lite?
The third USB port is situated on the lower left-hand side of BoB Lite™ (labelled handset charge only) It’s a designated port for charging the BoB Lite™ handset and is not for any other devices.
Does BoB Lite have a PPPoA?
This device supports internet access through an ADSL or fibre connection. Since many ADSL providers use PP PoE or PPPoA to establish communications with their customers, BoB Lite™ includes built-in clients for these protocols, eliminating the need to install these services on your computer.
Does BoB Lite update automatically?
From time to time, new software to update BoB Lite™ will be released. This is known as firmware, and upgrades are usually done automatically. However in some cases you may want to install certain firmware yourself, usually at the recommendation of an Customer Service Representative.
Can Bob Lite be used offline?
If you want a computer, smartphone or tablet to stay offline (be it for safety or discipline), BoB Lite™ can prevent internet access through his connection at all times.
iiNet Usernames and Passwords
If your username and password do not work then please visit our Default iiNet Router Passwords page.
Test if Your Ports are Open
Now that you have forwarded ports on the iiNet BoB_Lite you should test to see if your ports are forwarded correctly.
Design
It's pretty rare that we come across a router design that's anything worth talking about. Most of them are plain creatures, and that's fine for a device that, frankly speaking, you want to spend as little time as possible actually looking at.
iiNet BoB wireless modem
Extremely simple set-up. A lot of additional features. Dual radios. USB charging port.
Features
BoB's an 802.11n router with an in-built ADSL2+ modem. To be specific, it's a Belkin modem/router, with shared branding between iiNet and Belkin. Wireless support is in the 2.4GHz range only, and we were rather surprised when checking BoB's interface to discover that it's a dual-radio router.
Performance
The normal state of affairs for any "in a box" product is that they come with everything needed and a particular emphasis on easy set-up.
Design
It's pretty rare that we come across a router design that's anything worth talking about. Most of them are plain creatures, and that's fine for a device that, frankly speaking, you want to spend as little time as possible actually looking at.
Features
BoB's an 802.11n router with an in-built ADSL2+ modem. To be specific, it's a Belkin modem/router, with shared branding between iiNet and Belkin. Wireless support is in the 2.4GHz range only, and we were rather surprised when checking BoB's interface to discover that it's a dual-radio router.
Performance
The normal state of affairs for any "in a box" product is that they come with everything needed and a particular emphasis on easy set-up.
How to access file server on BoB2?
Here’s an example of how to access the file server using Windows: 1. Open up the Start menu by clicking the button in the bottom left-hand corner of your screen.
How to get to the BoB2 home page?
How to get to the BoB2™ home page. 1. Open your computer’s web browser and in the address bar type http://10.1.1.1 - Make sure your computer is connected to BoB2™ either wirelessly or with an ethernet cable. 2. This is the BoB2™ home page.
How many USB ports does a BoB2 have?
BoB2™ has three USB ports. The first USB port on the right-hand side of the modem (labelled storage/charger) is for charging USB devices such as mobile phones, or for plugging in a USB hard drive. This port is not designed for a full . Network Attached Service (NAS) storage function.
What is a BoB2 phone?
He comes with his very own phone handset which allows you to take advantage of cheap phone calls over your broadband connection when you have a Netphone (VoIP) service.
What operating system does BoB2 work on?
BoB2™ supports a variety of operating systems including Mac OS® 8.x, 9.x & 10.x, Linux®, Windows® 98SE, ME, NT, 2000, XP, Vista, 7 & 8. You will need an internet browser and a network adapter that supports TCP/IP (the standard language of the internet).
Where is the modem password and remote management button?
Then click on ‘Modem password and remote management’ in the column on the left-hand side of the page.
Where is the third USB port on a BoB2?
of power for charging may result in damage to your equipment. The third USB port is situated on the lower left-hand side of BoB2™ (labelled handset charge only) It’s a designated
iiNet Usernames and Passwords
If your username and password do not work then please visit our Default iiNet Router Passwords page.
Test if Your Ports are Open
Now that you have forwarded ports on the iiNet BoB you should test to see if your ports are forwarded correctly.
