Remote accessto a IINET BOB2 router via the internet, is this possible? Yep. Log in to the modem via http://10.1.1.1 and then choose "Advanced Settings" from along the top menu. Before/during this, it's strongly recommended you change the modem's login password on the same page.
Full Answer
How do I get online with my iiNet modem?
To get online, all you need to do is finish setting up your modem with your username and password. You can do this by following the setup guide for any modem purchased from iiNet, available for download here. If you purchased your modem elsewhere, please refer to the setup guide that came in the box.
Is it possible to access remote access to a iiNet Bob2 router?
Remote accessto a IINET BOB2 router via the internet, is this possible? Yep. Log in to the modem via http://10.1.1.1 and then choose "Advanced Settings" from along the top menu. Before/during this, it's strongly recommended you change the modem's login password on the same page.
How do I access my modem/router settings?
In order to access your modem/router settings in the first place, you’ll need to log in to your modem’s default gateway address with its admin password (and sometimes, a username, too). The default login credentials are always found on the modem’s barcode sticker, such as the example below.
How to secure my iiNet network?
for more security i enable and set up MAC address filtering. Stops any anyone using your network unless you go to modem settings and input their computers MAC address. refer users manual downloaded from IInet. frank Raabsays: June 4, 2020 at 5:32 pm Guys
How do I access my iiNet modem?
On a device that's connected to your modem, open your web browser and go to http://10.1.1.1. For TG-1s: Log in with the default username "admin" and default password “admin”, or use your custom login details.
How do I access my modem gateway?
On a computer or device that's connected to your modem via Ethernet or WiFi, open your web browser. Type the default gateway address into the address bar and then hit the Enter key on your keyboard. Log in with the default username and/or password as required.
How do I connect my phone to my iiNet modem?
Press the connect a phone handset to your modem's Power button on the back of the modem to turn Phone1 port. 2. Use the supplied Ethernet cable to connect your connect your computer to any of your modem's 4 modem's red WAN port to the UNI-D 1 port on LAN ports.
What is the IP for iiNet router?
Type 10.1. 1.1 (the most common IP for iiNet routers) in the address bar of your web browser to access the router's web-based user interface.
Why can't I connect to my router admin page?
It's probably because the router firewall is enabled and prevents the other devices to connect to it. In this case you have to reset the router (by pushing the reset button with a pin or power off then power on after about 15 seconds). When the router comes up, you can access the admin page only for about one minute.
How do I access my modem without Internet?
3 AnswersConnect a wired ethernet cable from your computer to the router.Connect it to the LAN, the ports numbered 1,2,3,4. ... You may want to check if your network card is set to DHCP, Start -> Run -> ncpa.cpl -> right click NIC -> Properties -> Internet Protocol (TCP/IP) -> Properties.More items...•
How do I connect my phone to my NBN modem?
1:173:06Setting up your home phone on the nbn™ network. FTTN or FTTBYouTubeStart of suggested clipEnd of suggested clipPick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plugMorePick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plug into the gray DSL port on the Gateway insert. The other end into the wall phone socket.
What is WPS on iiNet modem?
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy, yet secure way, without the need to enter any of your wireless settings manually.
How do I log into my toolbox?
Logging in to Toolbox Go to Toolbox. Alternatively, you'll find a login button in the top menu bar on our website. Log in with your iiNet username and password. You can find your username on your invoice as shown below.
What is the default password for a iiNet router?
Log in with the default username "admin" and default password “password”. If you have changed these details from the default, use your custom login details instead. Click Management in the top menu bar.
What is the modem IP address?
1.1 is the common IP address that is used by many modems and routers nowadays. It's a default IP address where you can access your modem or wireless router to change settings, change the WiFi name or password. Sometimes, your modem or router may use a different IP address, such as 192.168.
How do I find my modem information?
Click the Start and then click the Programs folder. Next, click the Accessories and then the System Information folder. In the System Information window, click the + symbol next to Components. Click Modem and in the right side of the window you'll see the complete information about the modem.
How do I change my modem settings?
How to Change Your Wireless Router Settings. ... Connect to your network wirelessly, or via ethernet. ... Find your router configuration page. ... Log in with the username and password. ... Find the Wireless Settings page. ... Set the new channel, usually with a dropdown menu. ... Your router will now reboot. ... Troubleshooting.
What is a modem login password?
Your modem login password is used to log in to the modem's default gateway where you can change your modem settings.
What to do if you forgot your password for your modem?
If you've forgotten a custom modem login password, you can factory reset your modem to return it to the default. Please note that a factory reset will remove all custom settings from a modem, including your internet service configuration, Netphone (VoIP) settings and any custom WiFi network names and passwords. You'll need to set up your modem again by following the instructions in its setup guide.
How much money was lost in remote access scams in 2017?
In 2017 alone, the Australian Competition & Consumer Commission (ACCC)’s Scamwatchreported over $2 million lost to Remote Access scamsand the amount lost each month has continued to rise.
What happens if a scammer gets remote access?
If the scammer does manage to get a Remote Access connection to a computer, then things get really serious. With full control of your computer, it’s possible they might Install viruses or other malicious software (malware) on your computer, such as:
Is remote access good?
Remote Access is a great tool if you know what you’re doing with it and you trust the source. However, you should be very suspicious of anyoneasking you to accept a Remote Access connection out of the blue.
Is Iinet good for seniors?
Yes great work iinet especially for us senior citizens. This article is very easy to understand and makes us feel a lot more secure in knowing how to handle this situation if it occurs.
Who is Iinet's loyal customer?
Thanks iinet for caring Stay well and safe,from your loyal and loving customer Jenn Owen
How to access router settings?
In order to access your modem/router settings in the first place, you’ll need to log in to your modem’s default gateway address with its admin password (and sometimes, a username, too). The default login credentials are always found on the modem’s barcode sticker, such as the example below. However, if you know a thing or two about password strength, you’ll know that the common default passwords (e.g. “admin” or “password”) aren’t very strong at all. Not to mention that if the admin password is the same as the one printed on the barcode sticker, guests, housemates or children could easily access and change your router settings.
What modem comes with N600?
That Netcomm modem is probably a NB16WV 02, it came with N600 Dualband on it. You can find more info on it, here:
What is UPNP on a router?
This feature allows devices on the local network to configure the router remotely, and critically, enables changes to the port settings that aqlow network traffic to enter the local network. The facility has existed on routers since about 2002 or 2003.
What is firmware modem?
You’re probably familiar with software updates, but what about “firmware”? Firmware is a special type of software that’s programmed into a device’s read-only memory. It gives the device everything it needs to operate, such as telling your modem’s how to run your broadband service. That includes security protocols, so it’s good to make sure your modem has the latest firmware.
How else can you prevent unwanted access to your home network?
No matter where you’re located, your WiFi network should always have a password to connect, and using a stronger encryption method such as WPA2 will give you better protection.
Can I use my WiFi password on my router?
Fortunately, they’re set up with a password, but much like the default admin password, the default WiFi password is printed on the modem’s barcode sticker , making it accessible to guests, housemates and children. While connected to your WiFi network, users can’t just use your broadband data: they can also access other devices connected to your home network, such as printers or storage drives, and potentially even log in to your router settings.
What is a modem login password?
Your modem login password is used to log in to the modem's default gateway where you can change your modem settings.
What to do if you forgot your password for your modem?
If you've forgotten a custom modem login password, you can factory reset your modem to return it to the default. Please note that a factory reset will remove all custom settings from a modem, including your internet service configuration, Netphone (VoIP) settings and any custom WiFi network names and passwords. You'll need to set up your modem again by following the instructions in its setup guide.
