Plug in the power cable and turn your TG-789 on using the Power button. Connect a device to your TG-789 via WiFi or Ethernet cable and go to http://10.1.1.1 in your browser. Log in with your TG-789 username and password. By default, these are printed on the barcode sticker at the bottom of your TG-789.
Full Answer
What is remote assistance on the tg-789 gateway?
Remote assistance allows you to grant access to your TG-789 Gateway from the Internet. Remote assistance modes There are two modes of remote assistance: Permanent: The remote session ends when the technical support disables remote assistance or after restarting your TG-789 Gateway.
How do I Power my tg-789 gateway?
The TG-789 Gateway is plugged into a power socket outlet. You are using the correct power supply for your TG-789 Gateway device. The power requirements for your TG-789 Gateway are clearly indicated on the identification label of the TG-789 Gateway. Only use the power adaptor supplied with your TG-789 Gateway.
How do I contact internode tg789 support?
7am– Midnight (cst) 7 days 1300 788 233 support @ internode.com.au ABN 82 052 008 581 Title Internode TG789 Hardware Quick Start Guide - ADSL, NBN, FTTP, FTTN, FTTB, Wireless
How do I access my iiNet router settings?
Log in with the default username "admin" and default password “admin”, or use your custom login details. Select the Advanced tab and then select Wireless > Wireless Settings from the left-hand menu. By default, you'll see the settings for the 2.4GHz WiFi network.
How do I connect my phone to my iiNet modem?
Press the connect a phone handset to your modem's Power button on the back of the modem to turn Phone1 port. 2. Use the supplied Ethernet cable to connect your connect your computer to any of your modem's 4 modem's red WAN port to the UNI-D 1 port on LAN ports.
Does TG-789 have 5ghz WiFi?
The power switch ( ) allows you to power on/off your TG-789 Gateway. The built-in 2.4 GHz IEEE802. 11n and 5 GHz IEEE802. 11ac wireless interfaces provide wireless access to your wireless clients.
What is WPS on iiNet modem?
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy, yet secure way, without the need to enter any of your wireless settings manually.
How do I connect my phone to my NBN modem?
1:173:06Setting up your home phone on the nbn™ network. FTTN or FTTBYouTubeStart of suggested clipEnd of suggested clipPick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plugMorePick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plug into the gray DSL port on the Gateway insert. The other end into the wall phone socket.
What is my iiNet netphone password?
2. Enter the Username and Password (default: admin) Page 2 2 3.
Can I use my iiNet modem with another provider?
Luckily, iiNet are pretty good at allowing the modem to be used with other ISPs, with no drastic steps to overcome.
Is iiNet NBN modem any good?
Best Value for Money: iiNet was rated best for value, followed by Netgear and TP Link. Best Design: Netgear was also rated best for design, leading the way ahead of Telstra and iiNet.
What is the best router for NBN?
TP-LINK AC1200 Wireless VDSL/ADSL Modem Router, NBN Ready. ... ASUS RT-AC68U, AC1900 Dual Band Gigabit WiFi Router. ... NETGEAR “Nighthawk” AC2300 Smart WiFi Router. ... NetComm NF18ACV AC1600 Modem Router with Voice. ... ASUS RT-AC86U, AC2900. ... AC2600 MU-MIMO Wi-Fi Router. ... Billion BIPAC 8900AX-2400 Tri-Band.
How do I log into my toolbox?
Logging in to Toolbox Go to Toolbox. Alternatively, you'll find a login button in the top menu bar on our website. Log in with your iiNet username and password. You can find your username on your invoice as shown below.
What is bridge mode on a router?
Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.
How do I reset my TG 789 broadband gateway?
TG-789 Broadband Gateway Click the Gateway panel on the dashboard. Scroll down slightly. Next to Factory Defaults, click the Reset button. Wait for the factory reset to complete; this usually takes 2-7 minutes.
How do I connect my modem to my phone?
You may be able to use a micro-USB cable and connect to the USB port of the router, if it has one. Otherwise, you may be able to use a USB to Ethernet converter/cable to connect to an OTG cable, which would then connect the phone to the modem.
How do I connect my mobile to my modem without WIFI?
0:042:34How to connect your phone to the internet without wifi - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to connect your OTG cable to the Ethernet adapter. Just like this and now you want toMoreYou want to connect your OTG cable to the Ethernet adapter. Just like this and now you want to connect it to your phone it just goes under the port at the bottom of your phone and connect it now.
How do I connect my phone to Ethernet?
0:091:29Connect Android to Ethernet - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost of you probably need a micro USB to USB a female adapter. So when you connect it all to yourMoreMost of you probably need a micro USB to USB a female adapter. So when you connect it all to your device running Android marshmallow.
How do I connect my USB modem to my Android phone?
2:366:26HOW TO CONNECT YOUR USB INTERNET MODEM TO ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all you need to have is this thing it's called a USB OTG cable. It has a USB port right here andMoreSo all you need to have is this thing it's called a USB OTG cable. It has a USB port right here and the standard input for charging or USB for the Samsung Galaxy. Or. Any other new Android phone.
How to connect a TG-789 to a wireless network?
To connect a wireless client (for example, a computer) to the wireless network, configure that wireless client . with the wireless settings (network name and wireless key) used by the access point. If your TG-789 Gateway is still using the default wireless settings, use network name (SSID) and wireless .
What is the maximum Ethernet speed on a TG-789?
All Ethernet ports on the TG-789 Gateway are Gigabit Ethernet ports and have a maximum speed of 1
What port is used for TG-789?
The Gigabit Ethernet WAN port allows you to use your TG-789 Gateway as local router.
What is the phone port on a TG-789?
ThePhone( ) port allows you to connect a corded phone to your TG-789 Gateway. This way you will be able to make phone calls over the Internet and save on communication costs, especially for long-distance calls.
How to connect a wireless client to a wireless network?
To connect a wireless client (for example, a computer) to the wireless network, configure that wireless client #N#with the wireless settings (network name and wireless key) used by the access point. #N#
What is Ethernet switch?
The Ethernet switch ( ) allows you to connect an Ethernet device (for example, a computer) to your local #N#network. For more information, see “2.3 Connecting.your wired devices” on page 15All Ethernet ports on the TG-789 Gateway are Gigabit Ethernet ports and have a maximum speed of 1 #N#Gbps (Gigabit per second).
Can you connect a TG-789 to a power supply?
allows you to connect the power supply. Only use the power supply delivered with your TG-789 Gateway.
How to connect a router to a computer?
Connect one end of the supplied Ethernet cable to the network port on your computer. Connect the other end to any of the four yellow LAN ports on the back of the router. Connect the included power supply to the power port on the back of the router, and plug it into a 240v power outlet. Switch on the router.
How to reset a router if you forgot your password?
You can reset your router to factory settings using the Reset button on the back of the device - to the right of the power button. Press and hold the button for 5 to 8 seconds to factory reset the router.
How to connect naked ADSL?
Cabling for Naked ADSL Connections. Connect a phone cable from the DSL port on the back of the router to the telephone port on your wall. Make sure that this cable is less than 3 metres long, as longer cables can affect the performance of your service.
How to find IP address on router?
Open your preferred web browser - for example, Internet Explorer, Google Chrome, or Mozilla Firefox. Enter the following number into the address bar and then hit Enter on your keyboard: 10.1.1.1 (this number is called an IP Address ).
How many WiFi settings does my router have?
Your router has two default WiFi networks set up - one for 2.4 GHz and one for 5 GHz WiFi. If you would like to use the default settings, you can find the network names and passwords on the bottom of your router. To use the default WiFi settings, simply do not change any settings and click Next on the WiFi steps.
What does restricting access mean in IINET?
iinet need to adress these issues, currently restricting access means turning off the modem.
Can technology and children mix?
Sometimes technology and children just don’t mix.
Can you block IP addresses on TG-789?
There is a facility in the TG-789’s configurations pages that allows you to block sites or IP addresses and set when they are not able to be viewed.
Does IINET work at home?
Okay, I use iinet at home and yes the basic modem that they provide is, well lest just say its really basic.
Who is Iinet's loyal customer?
Thanks iinet for caring Stay well and safe,from your loyal and loving customer Jenn Owen
How to access router settings?
In order to access your modem/router settings in the first place, you’ll need to log in to your modem’s default gateway address with its admin password (and sometimes, a username, too). The default login credentials are always found on the modem’s barcode sticker, such as the example below. However, if you know a thing or two about password strength, you’ll know that the common default passwords (e.g. “admin” or “password”) aren’t very strong at all. Not to mention that if the admin password is the same as the one printed on the barcode sticker, guests, housemates or children could easily access and change your router settings.
How else can you prevent unwanted access to your home network?
No matter where you’re located, your WiFi network should always have a password to connect, and using a stronger encryption method such as WPA2 will give you better protection.
Do all modems have remote admin?
All modems supplied by us have Remote Administration disabled by default. If you’re really not sure if you’ve enabled it or not, this guideincludes steps for checking that Remote Admin is switched off. If you have a third party router, please visit the manufacturer’s website for support information.
Do you need a password for remote administration?
Note: If you use a feature known as Remote Administration, it’s VERY important that you have a strong password in place!
Is iiNet modem safe?
Excellent news is that my iiNet modem, with UPnP disabled, is safe from external attack, and otherwise is working happily with all my connected devices .
