Plug in the power cable and turn your TG-789 on using the Power button. Connect a device to your TG-789 via WiFi or Ethernet cable and go to http://10.1.1.1 in your browser. Log in with your TG-789 username and password. By default, these are printed on the barcode sticker at the bottom of your TG-789.
Full Answer
Does iiNet tg789 have a good WiFi range?
I have had my iiNet VDSL service now for a few years and I regard it as quite acceptable and took advantage of the WiFi capability. However since the recently supplied TG789 has been in service my WiFi range is really poor on both bands and it refuses to connect to my Solar Inverter which is just 18m away.
What is remote assistance on the tg-789 gateway?
Remote assistance allows you to grant access to your TG-789 Gateway from the Internet. Remote assistance modes There are two modes of remote assistance: Permanent: The remote session ends when the technical support disables remote assistance or after restarting your TG-789 Gateway.
How is the tg-789 gateway connected to the network?
The TG-789 Gateway is directly connected to the DSL network. Ethernet WAN The TG-789 Gateway is connected to an Internet Access Device (IAD). The IAD brings the Internet into your home and the TG-789 Gateway acts as a local router. The Broadband card The Broadband card displays the status of the DSL or Ethernet WAN connection.
How do I access my iiNet router settings?
Log in with the default username "admin" and default password “admin”, or use your custom login details. Select the Advanced tab and then select Wireless > Wireless Settings from the left-hand menu. By default, you'll see the settings for the 2.4GHz WiFi network.
How do I connect my phone to my iiNet modem?
Press the connect a phone handset to your modem's Power button on the back of the modem to turn Phone1 port. 2. Use the supplied Ethernet cable to connect your connect your computer to any of your modem's 4 modem's red WAN port to the UNI-D 1 port on LAN ports.
What is WPS on iiNet modem?
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy, yet secure way, without the need to enter any of your wireless settings manually.
Does TG 789 have 5ghz WiFi?
The power switch ( ) allows you to power on/off your TG-789 Gateway. The built-in 2.4 GHz IEEE802. 11n and 5 GHz IEEE802. 11ac wireless interfaces provide wireless access to your wireless clients.
How do I connect my phone to my NBN modem?
1:173:06Setting up your home phone on the nbn™ network. FTTN or FTTBYouTubeStart of suggested clipEnd of suggested clipPick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plugMorePick up the gray cable with the gray plugs on the ends matching the colors insert. The gray plug into the gray DSL port on the Gateway insert. The other end into the wall phone socket.
What is my iiNet netphone password?
2. Enter the Username and Password (default: admin) Page 2 2 3.
Can I use my iiNet modem with another provider?
Luckily, iiNet are pretty good at allowing the modem to be used with other ISPs, with no drastic steps to overcome.
How do I log into my toolbox?
Logging in to Toolbox Go to Toolbox. Alternatively, you'll find a login button in the top menu bar on our website. Log in with your iiNet username and password. You can find your username on your invoice as shown below.
What is bridge mode on a router?
Configuring a High-Speed Internet modem in Bridge Mode allows your PC, separate router or other device to establish a connection to the Internet. The device usually connects directly behind the High-Speed Internet modem and is configured with the PPPoE (Point-to-Point Protocol over Ethernet) username and password.
What is the best router for NBN?
TP-LINK AC1200 Wireless VDSL/ADSL Modem Router, NBN Ready. ... ASUS RT-AC68U, AC1900 Dual Band Gigabit WiFi Router. ... NETGEAR “Nighthawk” AC2300 Smart WiFi Router. ... NetComm NF18ACV AC1600 Modem Router with Voice. ... ASUS RT-AC86U, AC2900. ... AC2600 MU-MIMO Wi-Fi Router. ... Billion BIPAC 8900AX-2400 Tri-Band.
Is iiNet NBN modem any good?
Best Value for Money: iiNet was rated best for value, followed by Netgear and TP Link. Best Design: Netgear was also rated best for design, leading the way ahead of Telstra and iiNet.
What NBN modem does iiNet use?
Fibre-to-the-Premises (FTTP), Hybrid Fibre Coaxial (HFC) and Fibre-to-the-Curb (FTTC) iiNet customers will be using the TP-Link VX420-G2H or VX420-G2V as a router, connecting to the NBN connection box (aka the NBN modem).
How do I connect my modem to my phone?
Connect your router to your modem, then plug the phone line into the “Phone 1” or “Tel 1” port on your router. If you have a modem-router combo, just plug the phone line into the “Phone 1” or “Tel 1” port. For DSL modems, you must use an additional telephone cable to connect the DSL port to a wall jack.
How do I connect my mobile phone to my router?
Setting up Android like a wireless router is straightforward.On Android, open Settings > Network & internet > Hotspot & tethering.Next, select Portable hotspot.Tap On then confirm the message regarding interruptions to existing connections.Click Configure hotspot.Set a Network name (SSID)---this can be anything.More items...•
Can I connect my phone directly to my router?
Does your Android have wi-fi? (most do). You will need to pick up a wi-fi router and connect it to your modem, then connect your android to the router by wi-fi. Call your ISP as most of them now supply modem/router combinations.
How do I connect my phone to Wi-Fi?
For more info, go to the Nexus Help Center.Open your device's Settings app.Tap Network & internet. Internet.Tap your Wi-Fi network. Share.Your phone will give you a QR code. To join the same network, scan the code on another device.
Can a DLNA server be accessed on a device that is not DLNA compatible?
The DLNA server cannot be accessed on devices that are not DLNA compatible and connected to your home network.
Can I plug a USB drive into a TG-789?
You can plug in a USB file drive into the TG-789's USB 2.0 port so any computers and other devices connected to your home network via Ethernet or WiFi can access the files on the drive. The following file systems are supported:
Where is the password on a TG-789?
Log in with your TG-789 username and password. By default, these are printed on the barcode sticker at the bottom of your TG-789.
How to connect a TG-789 to a phone?
Plug a phone cable from the telephone wall socket into the grey DSL port on your TG-789. Plug in the power cable and turn your TG-789 on using the Power button. Connect a device to your TG-789 via WiFi or Ethernet cable and go to http://10.1.1.1 in your browser. Log in with your TG-789 username and password.
What is guest wifi?
Guest WiFi allows you to share your internet access with friends and family who visit without giving them your main WiFi password.
Can guests access other computers on your network?
Guests can't access other computers or devices on your network, including any Network Attached Storage devices.
Does the TG-789 have a guest network?
Note that the TG-789 will have a Guest network for both the 2.4GHz B/G/N WiFi network and the 5GHz AC WiFi network. If you're not sure that your guests will have devices which are compatible with the newer 5GHz AC WiFi network, set up the 2.4GHz network instead.
How to connect a TG-789 to a WAN?
Plug an Ethernet cable from the UNI-D 1 port on your NBN Connection Box into the red WAN port on your TG-789 . If UNI-D 1 doesn't work, try each UNI-D port. Plug in the power cable and turn your TG-789 on using the Power button.
Where is the password on a TG-789?
Log in with your TG-789 username and password. By default, these are printed on the barcode sticker at the bottom of your TG-789.
Does iiNet work at night?
But really in general, anything anywhere close to or during peak times, close to midnight or late into the night, or any time you really need it to work properly, or just anytime it feels like it, it generally doesn't work very well at all, has regular speeds under 1mbps, or has some serious lag time.. Usually, during any peak times, like after work, say 5-9pm, it's not uncommon to get consistent speeds of less then 1mbps with multiple dropouts, despite the plan you're on, and that wont ever change unless you ring them and raise an issue, and then it miraculously works fine while you're on the phone to the help desk, then goes back to 1mbps within 5 mins of hanging up, completely frustrating..
Is the iinet TG789 discontinued?
iiNet TG789 has been discontinued. See all iiNet Modems.
How to connect a router to a computer?
Connect one end of the supplied Ethernet cable to the network port on your computer. Connect the other end to any of the four yellow LAN ports on the back of the router. Connect the included power supply to the power port on the back of the router, and plug it into a 240v power outlet. Switch on the router.
How to connect naked ADSL?
Cabling for Naked ADSL Connections. Connect a phone cable from the DSL port on the back of the router to the telephone port on your wall. Make sure that this cable is less than 3 metres long, as longer cables can affect the performance of your service.
How to reset a router if you forgot your password?
You can reset your router to factory settings using the Reset button on the back of the device - to the right of the power button. Press and hold the button for 5 to 8 seconds to factory reset the router.
What is a pre-shared key?
A Pre-shared key prevents people you don't know from accessing your wireless network. When you connect your computers to your wireless network, you will be asked for the pre-shared key. If someone tries to connect without the pre-shared key, they will be unable to connect.
Where to connect a third phone cable?
Connect a third phone cable from the Line or Wall Socket port on the ADSL Line Filter to the telephone port on your wall.
TP-Link VR1600v Setup Guides
Please select your broadband technology. This should be mentioned in any emails from us about your broadband order.
TG-789 Broadband Gateway Setup Guides
Please select your broadband technology. This should be mentioned in any emails from us about your broadband order.
Smart Modem Gateway (VX420-G2H) Setup Guides
Please select your broadband technology. This should be mentioned in any emails from us about your broadband order.
