Remote-access Guide

install routing and remote access server 2012 r2

by Clement Renner Published 3 years ago Updated 2 years ago
image

Setting up Windows Server 2012 R2 routing/NAT functionality

  1. To start, from Server Manager click Manage > Add Roles and Features.
  2. On the Before You Begin page, click Next.
  3. Select Role-based or feature-based installation and click Next.
  4. On Server Selection select the server you want to install the feature on and click Next.
  5. In the list of Server Roles, select Remote Access and click Next.

Procedure
  1. Open the Windows Server 2012 Server Manager.
  2. From the Server Manager Dashboard, select Manage > Add Roles and Features.
  3. Click Next to display the Select Server Roles window.
  4. Select the Remote Access check box. ...
  5. Click Next until the Select Role Services page is displayed.
  6. Select Routing.

Full Answer

How to configure remote routing and remote access in Windows Server 2012?

Routing and Remote Access in Windows Server 2012 - Part 1. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it or you can go to the "Manage" option and then click the "Add Roles and Features", they both will open the same window. Now a new window will be opened named "Add Roles and Features".

How do I install the remote access role?

You must install the Remote Access role on a server in your organization that will act as the Remote Access server. On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen.

How do I enable IIs routing on Windows?

On Role Services click the Routing checkbox. Click Add Features on the pop-up dialogue. Click Next on the Web Server Role (IIS) page. The Feature has now been added to Windows. A reboot is not necessary for this process so we will now proceed to the next part of the configuration. From Administrative Tools look for Routing and Remote Access.

How do I set up routing and remote access?

Setting up Routing and Remote Access is done in three steps: On my GW01 server I have named the network interfaces External and Internal, listed by running: Listing the network adapters. To set a static IP address on the internal network adapter you run the following commands:

image

What is Routing in Windows Server 2012?

Instructions. Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I install Remote Access and Routing in Windows 2016?

Steps: Enable routing on Microsoft Windows Server 2016 In Routing and Remote Access, right-click the server, and select Configure and Enable Routing and Remote Access. When the setup wizard launches, click Next. Select Custom configuration and click Next. Select LAN routing and click Next.

What is Windows Routing and Remote Access?

Routing and Remote Access Service (RRAS) is a Microsoft API and server software that makes it possible to create applications to administer the routing and remote access service capabilities of the operating system, to function as a network router. Developers can also use RRAS to implement routing protocols.

Is IIS required for RRAS?

RRAS: Features are managed in the Routing and Remote Access console. The Remote Access server role is dependent on the following features: - Web Server (IIS): Required to configure the network location server and default web probe.

How do I install Remote Access and routing?

ProcedureOpen the Windows Server 2012 Server Manager.From the Server Manager Dashboard, select Manage > Add Roles and Features.Click Next to display the Select Server Roles window.Select the Remote Access check box. ... Click Next until the Select Role Services page is displayed.Select Routing.More items...

How do I set up Remote Access and routing?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies. Right-click the right pane, point to New, and then click Remote Access Policy.

What is the use of routing and remote access service?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

How do I restart Routing and Remote Access Service?

To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

How do I connect to RRAS VPN?

Go to Administrative tools → Computer Management → Local Users and Groups → Users. Right click on the user(which you want to set for VPN connection) and click on properties. Go to Dial-in tab, select 'Allow access' in 'Network Access Permission' option and click on Apply.

How do I setup a VPN server on Windows?

To create a VPN server on Windows 10, use these steps:Open Control Panel on Windows 10.Click on Network and Sharing Center.Using the left pane, click the Change adapter settings link. ... On “Network Connections,” use the Alt keyboard key to open the File menu and select the New Incoming Connection option.More items...•

What is the main purpose of a RAS server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

What is Routing and Remote Access server 2016?

RRAS stands for Routing and Remote Access Service is a feature of Windows Server operating systems family that provides additional support for TCP/IP internetworking. RRAS makes it possible to create applications to administer the routing and remote access service capabilities of the operating system.

What server 2016 role can you install to set it up as a router?

Windows Server 2016 router configuration requires Routing and Remote Access role. Here are the steps to install this role in Windows Server 2016: Login to the server you wish to configure as a router and open Server Manager. From Server Manager, click Manage and select Add Roles and Features.

How can you install enable and configure Remote Access services on server?

Install the Remote Access roleOn the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.Click Next three times to get to the server role selection screen.On the Select Server Roles dialog, select Remote Access, and then click Next.Click Next three times.More items...•

How can I use my Windows server as a router?

Press “Start” and under “Windows Administrative Tools” find “Routing and Remote Access”. Right-click on the server name and select “Configure and Enable Routing and Remote Access”. Press “Next” at the wizard welcome screen. Choose “Network address translation (NAT)” and press “Next”.

What is R2 routing?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them .#N#To install this feature complete the steps below.

How to add roles and features to a server?

To start, from Server Manager click Manage > Add Roles and Features. On the Before You Begin page, click Next. Select Role-based or feature-based installation and click Next. On Server Selection select the server you want to install the feature on and click Next.

What is a RRAS?

If you are using Hyper-V Network Virtualization or you have VM networks deployed with VLANs, you can deploy RRAS as a virtual machine (VM)-based software gateway and router that allows Cloud Service Providers (CSPs) and Enterprises to enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet.

Is RRAS available in Server 2012?

The RRAS Multitenant Gateway is available only in Windows Server 2012 R2. It is not available in Windows Server® 2012.

How to install Remote Access Server?

On the server that will act as the Remote Access server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. In the Select server roles dialog box, select Remote Access, click Add Features, and then click Next.

What group does DirectAccess belong to?

For a client computer to be provisioned to use DirectAccess, it must belong to the selected security group . After DirectAccess is configured, client computers in the security group are provisioned to receive the DirectAccess Group Policy Objects (GPOs) for remote management.

Installing the Routing and Remote Access Role

1. Log into the server with administrative credentials 2. Open Server Manager 3. On the Dashboard, locate and click Add roles and features 4. Click Next to skip the Before you begin page 5. Choose Role-based or feature-based installation and click Next

Configure the Remote Access Role

Now that the installation is completed, we will want to actually configure the role.

How to setup a NIC?

Setting up Routing and Remote Access is done in three steps: 1 Configuring the internal NIC 2 Install the Routing and Remote Access role 3 Configure the Routing and Remote Access role

Can you configure NAT gateway in PowerShell?

Once the Routing and Remote Access role and its PowerShell cmdlets are added, you can now configure it. In this scenario you set up a simple NAT gateway.

Can you use multiple network adapters for Hyper-V?

In this scenario, instead of relying on the physical host platform (Hyper-V / VMware), you use a virtual machine with multiple network adapters to do the routing. One benefit of doing that is that this works the same no matter what virtual platform you are using, and obviously that you don't need to change the host network configuration (something that can be challenging/scary when remoting into a lab server in another city, like I do ).

How to launch NPS in RRAS?

Once you’ve returned to the RRAS window, *left-click* Remote Access Logging and Policies. Then right-click and Launch NPS.

How to change VPN to SSTP?

Click the Security Tab -> Change type of VPN to SSTP. By default, it detects the type of VPN automatically, but slightly slows down the process.

What OS is SSTP?

SSTP was introduced in Windows Vista, so the OS must be Vista or Greater ( or Server 2008 and greater). Go to Network and Sharing Center. Click Setup New Connection or Network.

Can you use NAP to access VPN?

Enter your user information. Don’t forget that if you didn’t setup a Group to access the VPN using NAP , you’ll need to enable Dial-In access within Active Directory Users and Computers for that user.

Does RRAS work with IIS?

It will force you to install IIS, which is odd, because RRAS can work independently of IIS (you can even stop and disable IIS and RRAS will still work). I would think just the IIS Hostable Web Core would be enough, but whatever. It’s required. Go ahead and accept that it will be installed.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9