ip camera nvr setup remote access

How To Setup a NVR for Remote Viewing

• 1. Understand Your Network Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). ...
• 2. Setup DDNS ...
• 3. Set Up A Port Forward ...
• 4. Assign The DDNS Hostname To Your NVR ...
• 5. Set Two IP Addresses For Your NVR ...
• 6. Verify That Local Viewing and Remote Viewing Works ...

Full Answer

How to connect IP cameras to NVR?

Ensure that NVR is connected to the Internet. Use Ethernet cables to connect the IP cameras to PoE NVR. As the NVR is enabled with the PoE technology, it can easily power the IP cameras. Take an HDMI cable or a VGA cable to connect NVR and TV or monitor.

How to configure an IP camera on Internet for remote viewing?

Below are the 3 simple steps to configure an IP camera on Internet for remote viewing within less than 2 minutes. Step 1: Download the Reolink App or Client to your phones or computers. Step 2: Launch the app and enter a unique ID number (UID) to add the camera device.

How to remotely access reolink cameras/NVRs?

Generally, there are 3 ways to achieve remote access for Reolink cameras/NVRs. Step 1. Find the UID of Reolink cameras/NVRs. Step 2. Refer to the following methods to remotely access Reolink cameras/NVRs.

How do I connect the NVR and PoE switch to the router?

First connect the NVR's LAN port to a LAN (numbered port) port on the router. Connect the uplink port of the PoE switch to a different LAN (numbered port) port on the router.

How do I connect IP camera to NVR remotely?

0:351:25How to Connect a Remote IP Camera to a QC Series NVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipCamera select private now enter the IP address of your IP. Camera enter your port number username.MoreCamera select private now enter the IP address of your IP. Camera enter your port number username. And password then click OK when you're finished adding cameras. Click on OK.

How do I access my NVR remotely?

To connect a DVR/NVR to the internet or configure a DVR/NVR for remote viewing, first and foremost, connect your DVR/NVR to your network router either via Ethernet cable or wirelessly. Network–enabled DVRs could be configured for remote viewing. Port forwarding is the key to remote viewing and remote access.

How do I access my IP camera remotely?

How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•

How can I remotely access my security cameras?

1:184:14How to View Your IP Security Camera Feeds From Anywhere with Remote ...YouTubeStart of suggested clipEnd of suggested clipThe first step is going to be to hop onto your nvr's hdmi interface or visit the web interface forMoreThe first step is going to be to hop onto your nvr's hdmi interface or visit the web interface for your camera or recorder navigate to the network menu. And then easy cloud.

How can I access NVR from mobile?

How do I connect my NVR to my Phone?Click on the “BACK” button. Tap the “+ Device” option to add a device.Enter IP address information and click “Save”. Your new device will be on the previous screen. ... Select new device and choose the channels you wish to see, click the Play/Live button.

How do I find my NVR IP address?

0:002:10How to check the IP address of your NVR or DVR - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical passwordMoreSo common to both dvrs. And nvrs is you go to main menu. And it may ask you for a graphical password log in. And go to network then go to tcpip. Under network and tcp it'll give you an ip address.

What is Onvif setting?

What is ONVIF? The surveillance industry has created an open standard protocol called ONVIF that allows cameras to communicate with each other and with network recording devices. ONVIF has different versions of compatibility that dictate which features can be integrated into the system.

What is P2P remote access?

In simple terms, a P2P camera is an IP camera that, thanks to the software inside, can identify and receive remote connections using a unique number (ID number) without using a static fixed IP address or its substitutes (such as DDNS).

How can I access my CCTV remotely without a static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

How can I use IP camera without PC NVR?

There are two ways on how you can do this without the NVR. The first option is your PC/mobile device communicates with the IP camera directly via a server. And secondly, it is also possible that the PC/mobile device communicates to a third party server which then connects to the IP camera.

How do I setup port forwarding for remote access?

Step 1: Enable Remote Desktop on your computer. ... Step 2: Open Remote Desktop port (port 3389) in Windows firewall. ... Step 3: Set up Port Forwarding (Port Translation) in the router. ... STEP 4: Map your dynamic IP to a hostname. ... STEP 5: Use Dynu DDNS service to access your computer remotely.

What ports need to be open for IP cameras?

You will find that the majority of network devices which are accessible using an Internet browser will be set as standard to port 80, including IP cameras and routers etc. This is due to the standard port for HTTP, or information being displayed through an browser, being port 80.

How do I access Hikvision NVR remotely?

0:1710:58How to set up Hik-Connect for remote viewing on your Hikvision CCTV ...YouTubeStart of suggested clipEnd of suggested clipSo first we just want to select our language which is English and then the next thing that the DVRMoreSo first we just want to select our language which is English and then the next thing that the DVR is going to ask you to do is set up a password.

How do I log into NVR?

Open up an Internet browser and type in the IP address of the NVR. Log in using username and password of the recorder. Go to Configuration > Network > Advanced Settings > Other. Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into.

How do I access NVR on Iphone?

0:083:07How to Access your NVR from an iPhone - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo to do this all you have to do is simply go into your DMS s software. And go to your deviceMoreSo to do this all you have to do is simply go into your DMS s software. And go to your device manager to set this up ok so. I have it already set up here it's called NVR.

How do I access my Honeywell NVR remotely?

Step 1: Request Service. Note: You must be connected to the Honeywell Network to request a Remote Access account. ... Step 2: Request Digital Certificate. A Digital Certificate is required to securely connect to Remote Access. ... Step 3: Download Software. Select software by region and type of Internet connection.

Why is remote access important for security cameras?

Remote access is often a key factor when choosing a security camera. The ability to monitor a location remotely is a huge benefit for most and is often the main reason for selecting an IP camera.

Why is my camera not working on the same router?

This is often not possible due to NAT loopback. NAT loopback happens when you try to access a local device using the external IP address or domain name.

What is NAT loopback?

You may encounter an effect called NAT loopback. Some routers do not allow you to access a local device using the external IP address of your router and will act as if the rule is incorrect. The best way to check that port forwarding is set up correctly is to try from a friend or relative’s computer.

How to check if port forwarding is working?

The best way to check that the port forwarding is working correctly is to view from an external network such as one belonging to a friend or relative, or to use a GPRS connection or mobile phone web browser.

How to set up port forwarding?

In order to set up port forwarding you will need to gather some network information, namely the IP address of your camera, internal IP address of your router, external IP address of your router and the port number to be used. Use the following techniques.

What is the default gateway for a router?

Once you have the right area, look for the default gateway. It should be something similar to 192.168.0.1. If you find more than one and cannot decide which one is correct, try entering the IP address into a web browser. Whichever is the correct IP address should bring up your routers web page.

How to find the IP address of a router?

To access this information in Windows XP, go to the Start menu and click on “Run”. In the box that opens, enter “cmd” and click “OK”. In Windows Vista and Windows 7, click the Windows icon and in the search box enter “cmd” and press enter.

How to connect NVR to internet?

Take the Ethernet cable from the router and connect it at the back of NVR. Ensure that NVR is connected to the Internet.

How to Configure NVR for IP Camera with a PoE Switch?

you can find ethernet switches for IP surveillance in different configurations. The configuration starts with a hardware setup. Here is how you can proceed with the hardware setup:

How to connect a router to a non-PoE NVR?

Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR.

What is the difference between a DVR and a NVR?

Most manufacturers provide technical assistance during the connection process or they also supply an easy-to-understand instruction manual with the product and accessories. NVR is very much similar to digital video recorders (DVR). DVR is mainly used with analog cameras, whereas NVR is used with IP Cameras. It is basically a DVR of an IP camera.

How to connect a camera to a POE switch?

As discussed before, NVR without PoE switch has no Ethernet ports at its back panel. It utilizes an external power adapter or an external PoE switch to power each IP camera. Like NVR with a PoE switch, the configuration of NVR for IP camera without a POE switch also begins with the hardware configuration. Here is how to proceed: 1 Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR. 2 Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. The PoE switch will deliver power as well as support video transmission. 3 Use an HDMI cable or VGA cable to connect the monitor and the NVR. Always use the right input for making the connection.

How to connect a monitor to a NVR?

Use an HDMI cable or VGA cable to connect the monitor and the NVR. Always use the right input for making the connection.

What is NVR camera?

What is NVR? A Network Video Recorder (NVR) is a system featuring a software application. This system is designed to collect and store the videos captured by all cameras connected to the network. NVR records these videos on mass storage devices.

How to remotely view IP cameras?

The most common way to enable remote viewing to IP cameras is by manually setting up port forwarding on the network router that the camera is connected to. UPnP (universal plug-and-play) is a newer method that is supported by some routers and cameras but is not as reliable in my experience. This article explains ports forwarding and dynamic DNS – two concepts to understand if you want to access security cameras remotely. Setting up port forwarding for multiple IP cameras is also covered.

How to access my camera remotely?

If you are fortunate enough to have a static IP address, you can always access your camera remotely using the IP address of the Internet connection (20 7.5.23.205 in our example) where your camera is installed. If your Internet IP address is dynamic, you should setup a DDNS service to manage changes in your IP address.

Why is it important to reserving IP addresses?

This is important because your port forwarding rule that you will setup will not work if the IP address of the camera changes.

What hostname to use for DDNS?

When you setup your account, you will choose a hostname to use. For example, my-ip-camera .ddns.org. After DDNS is setup, you will use this hostname instead of your IP address to access your IP camera remotely.

How to set port forwarding rule?

When you setup a port forwarding rule, you create a controlled hole in your firewall. To set port forwarding, login to your router and navigate to the port forwarding section of the interface. This will vary by make and model. You should consult your manual or search online for instructions.

How to confirm port forwarding is setup properly?

To confirm that port forwarding is setup properly, you must try to connect from a device that is not on the same network as your camera. If you are on-site where the camera is located, you can turn off the WIFI connection of your phone so that you connect over the cellular phone network.

Where do you make a connection to DDNS?

After you setup an account with the DDNS provider of your choice, a connection to the service must be made from your IP camera, a PC on the same network, or in your router. Where you do this depends on which of your devices support the DDNS update service.

How to add IP cameras to a PoE NVR?

This method is applicable if you purchased a PoE NVR and are trying to add IP cameras over the network. The LAN port on a PoE NVR is the network port that is separate from the grouped PoE ports on the back of the NVR. Connect the LAN port to an uplink port on the PoE switch as shown below, or you can even connect it directly to the router. Connect the other uplink port on the PoE switch to the router. The cameras connect to the PoE switch.

How do I access my IP camera system over the internet?

After the cameras and NVR are connected and working connecting the next step is to setup remote viewing. The biggest requirements for remote viewing are connecting the recorder to the router, port forwarding and internet speed. If you have made it this far into the guide, the recorder should be connected to the router whether directly, or through a PoE switch. This does not automatically mean that it can communicate to the internet and to your smartphone.

What are IP security camera systems?

IP camera systems comprise of one or more IP cameras that are connected over a computer network to a Network Video Recorder (NVR) or Digital Video Recorder (DVR). The IP camera sends video and other data in digital format over a network cable to the NVR. The NVR records the video stream from he cameras for playback and other functions like motion alerts. IP camera systems are also commonly referred to as NVR camera systems since they are commonly used with a network recorder at the heart of the system.

Who should setup an IP Camera system over a network?

There are many reasons to understand how to setup an IP camera system over a network. Prior to 2012, there was no such thing as a PoE NVR that came with built-in Power over Ethernet (PoE) Ports. In this time people had to know how to connect and configure IP cameras to work over a network for the recorder to store surveillance footage. These types of installations are still common for home users or businesses who purchase and have the following situations:

How to connect an IP cameras system?

Before you install any cameras it is extremely important to bench test all equipment to avoid the hassle of troubleshooting after installation. Bench testing is also a good time to learn how to configure the cameras to record. Many times improper cable crimping can lead to a lot of confusion. For proper network cable crimping technique, please refer to the section above.

How to configure a security camera recorder on the network?

After physically connecting the security camera recorder to the network, the first thing to do is to set its IP address that conforms to your network. You'll want to set the recorder to a static IP address that matches your network scheme. If you would like to learn what's an IP address and how to properly set devices on a network, we suggest you give this guide a read. For this guide we are going to take a shortcut with the help of the NVR or DVR as shown in the videos below.

How to verify that NVR is communicating with router?

To verify that the NVR is properly configured to communicate on the network run the Ping command on a PC that is connected to the same router as the NVR. The video below demonstrates how to verify that the NVR is communicating with a router. This process can also be used to find out what IP addresses are open on the network for IP cameras.

Setup Topics

Here are the setup topics that are covered in this article in the order they should be performed.

Connect Monitor, Power Supply, USB Mouse

After you unpack your new NVR, locate the power supply and USB mouse that is included. Connect the mouse to the USB port on the front or back of the NVR. The USB mouse is the easiest way to navigate the user interface of the NVR. You can also use the IR remote control if you prefer. Please note that a wireless remote is not included by default.

Default Login

When your NVR finishes booting up, you need to login before you can access the menu system. The default login is as follows:

Access Main Menu

To access the main menu of the Viewtron NVR, use the mouse to press the menu button in the lower left of the screen, then select settings.

Setup Time, Date, Time Zone

Before you setup video recording on your NVR, be sure to setup the time, date, and time zone. If you plan on connecting your NVR to your network (for local or remote network access), now is a good time to connect the Ethernet port on your NVR to your network.

Test Cameras Before Installing

If you are using any new cameras with your NVR, we highly recommend bench testing them before you mount them. What does bench testing mean? It simply means that you connect each camera before you mount them. This can be accomplished by connecting each camera to your NVR and viewing them on the monitor that you connected to your NVR.

Pre-made Cables vs Spools of CAT5E Network Cable

In this video, Mike discusses the pros and cons of using pre-made cat5e jumper cables vs cutting cable from a spool of Cat5e and crimping RJ-45 ends on.

Method 2: By Using Domain Name (exclude the battery-powered cameras and the cameras in NVR security kits)

Step 1. It requires that your router has a public IP address, and the camera is connected to that router.

Method 3: By Using IP Address (exclude the battery-powered cameras)

If you have a fixed public IP address on your router, then you don't need the DDNS service.