How do I remotely access IPFire?
By default, the web interface is at https://ipfire.localdomain:444 or https://ipfire:444. If you used a different hostname or domain, you will have to use that, or you can simply access it via the IP address (e.g. https://192.168.60.1:444 ).
What can you do with IPFire?
IPFire is an open-source Linux distribution with many useful features such as web based GUI, web proxy, intrusion detection, VPN, virus scanner, and many. Visit the official website for more details. It has many add-ons which can be installed with a single click and makes the system administrators life much easier.
What is IPFire What is it used for?
IPFire is a hardened open-source Linux distribution that primarily serves as a router and firewall, with a web-based administration dashboard for configuration. IPFire is can be used for a proxy server, intrusion detection, a VPN, a virus scanner, and other useful features.
What distro is IPFire based on?
open source Linux distributionIPFire is a hardened open source Linux distribution that primarily performs as a router and a firewall; a standalone firewall system with a web-based management console for configuration. IPFire originally started as a fork of IPCop and has been rewritten on basis of Linux From Scratch since version 2.
Is IPFire a router?
IPFire comes with a variety of features which allow it to run in many environments with very different requirements. Starting as a simple router, it can perform deep packet analysis, run helpful network management reports and also provides various services to the network. IPFire's firewall is easy to use, yet powerful.
How good is IPFire?
The project has modest system requirements. In fact it's one of the best ways to put an old computer to use. Even a single core processor with 1GB RAM can work well as a firewall server with IPFire, but you must make sure it has at least two network interfaces and 4GB of disk space.
How secure is IPFire?
IPFire is designed to be secure by default, however it can be further hardened so that it is even more difficult to attack. Hardening includes; Good Security Practice.
Is IPFire open source?
IPFire is a hardened, versatile, state-of-the-art Open Source firewall based on Linux. Its ease of use, high performance in any scenario and extensibility make it usable for everyone.
What is IP firewall?
You can use an IP packet filter firewall to create a set of rules that either discards or accepts traffic over a network connection. An IP packet filter firewall allows you to create a set of rules that either discard or accept traffic over a network connection.
Which is the best firewall for Linux?
Best Linux firewalls of 2022 in full:IPFire. Best free Linux firewall that's easy-to-use. ... OPNsense. Best free Linux firewall for scalability. ... pfSense. Best free Linux firewall that's feature-rich and FreeBSD-based. ... ClearOS. Best free Linux firewall for easy deployment. ... OpenWRT. Best free Linux firewall for routers.
What version of Linux does IPFire use?
IPFire Linux Firewall Distro Is Now Powered by the Long-Term Supported Linux 5.10 Kernel - 9to5Linux.
How do I install and configure IPFire?
How to Install 'IPFire' Free Firewall Linux DistributionIPFire Firewall Installation Guide.Choose Install IPFire.Select Language.IPFire Welcome Screen.Select IPFire License.Prepare Disk for IPFire Installation.Select Filesystem Type.IPFire Installation.More items...•
Is IPFire secure?
IPFire is designed to be secure by default, however it can be further hardened so that it is even more difficult to attack. Hardening includes; Good Security Practice.
How do I download from IPFire?
How to Install 'IPFire' Free Firewall Linux DistributionIPFire Firewall Installation Guide.Choose Install IPFire.Select Language.IPFire Welcome Screen.Select IPFire License.Prepare Disk for IPFire Installation.Select Filesystem Type.IPFire Installation.More items...•
Is IPFire open source?
IPFire is a hardened, versatile, state-of-the-art Open Source firewall based on Linux. Its ease of use, high performance in any scenario and extensibility make it usable for everyone.
What is IP firewall?
You can use an IP packet filter firewall to create a set of rules that either discards or accepts traffic over a network connection. An IP packet filter firewall allows you to create a set of rules that either discard or accept traffic over a network connection.
Why use external access rule in IPFire?
Please keep in mind, an external access rule may be a security risk and could be used to harm the system.
Can you specify when a firewall rule is active?
Optionally, you may specify at which time the rule is active only. See Creating Firewall Rules (reference) for all about this feature.
What is an IPFire firewall?
IPFire is a hardened, versatile, state-of-the-art Open Source firewall based on Linux. Its ease of use, high performance in any scenario and extensibility make it usable for everyone.
What is the highest priority in IPFire?
Security is the highest priority in IPFire. It is hardened to protect itself from attacks from the Internet and prevents attacks on your network.
Is IPFire free?
IPFire is free software and developed by an open community and trusted by hundreds of thousands of users from all around the world.
Allowed subnets (one per line)
In here, at least the subnets of the active zones (no DMZ ) should be findable. The entry of a subnetwork under this option allows general access to the Web-proxy.
Disable internal proxy access to Green from other subnets
If the proxy is activated and used for both zones (blue and green), the blue zone is allowed to reach the green network via http or https, regardless of the settings of the firewall (see the default IPFires circuit --> Network topologies and access methods ).
Disable internal proxy access from Blue to other subnets
Similarly to the previous checkbox, if the proxy is activated and used for both zones (blue and green), and you want to deny the blue network any access outside the blue space, the corresponding checkbox needs to be set. However, a direct access to IPFire is still granted.
Unrestricted IP addresses (one per line)
All IP addresses which are listed in here have no restrictions by the following regulation areas of: Time restrictions, Transfer limits, or the MIME-type filter.
Unrestricted MAC addresses (one per line)
All MAC addresses which are listed in here have no restrictions by the following regulation areas of: Time restrictions, Transfer limits, or the MIME-type filter.
Banned IP addresses (one per line)
All IP addresses that are entered here will be completely blocked by the proxy.
Banned MAC addresses (one per line)
All MAC addresses that are entered here will be completely blocked by the proxy.
The default settings
By default, IPFire grants you to access anything on the remote site and the remote site is granted to access any resource on your local network. This is usually the kind of connection users want if they fully trust the remote party. If there is any doubt, you should consider to restrict access with help of the IPFire firewall.
Step 1: Blocking all remote access
The first step is always to block the entire remote traffic and then add more rules that release this restriction a little bit again.
Step 2: Releasing restrictions
Now you want to grant access from your entire local network or host to a remote host or a part of the network. In order to realise this, you simply need to create a new rule with the desired source and destination hosts or networks, possibly limit the protocol and ports, select ACCEPT as rule action and save.
For professionals: IP masquerading
In some cases, it makes sense to hide the originating IP address. Reasons may be privacy or simply to make routing a bit easier. For that the ACCEPT rules created above can be edited and Source NAT can be enabled. Simply select the corresponding IP address of the local VPN subnet.
What is IPFire security?
Designed Security: IPFire was created with the goal of providing high security while remaining modular and flexible, whether you are an individual or a large enterprise. You can be confident that IPFire will protect the network from various types of security threats.
What is an IPFire firewall?
IPFire is a fortified open-source Linux distribution that serves primarily as a firewall and router. It has a web-based management console for configuration. IPFire Linux Firewall is one of the best and most effective open-source firewalls for any individual or an enterprise network. For more information about IPFire, ...
How many network adapters does an IPFire need?
IPFire needs at least two network adapters. The vast majority of Ethernet network adapters available on the market perform admirably on the IPFire. However, some 10GBit/s adapters are not supported by IPFire. Now, that you've checked if your system is compatible with IPFire, let's get started with the setup guide.
How much memory does IPFire require?
IPFire requires a minimum of 512MB of memory. But IPFire developers recommend at least 1GB. The amount of memory should be increased if various add-ons are used. The web proxy and URL filter, as well as the Intrusion Detection/Prevention System, are memory-intensive features/add-ons.
What processor is needed for IPFire?
IPFire requires a i586 CPU (from the Intel Pentium I upwards) or better. It is recommended that a 1 GHz processor or faster is used.
How long does it take to set up IPFire?
You can easily set up IPFire over a guided dialogue on the console in less than half an hour. Then for further administration of the IPFire and installation and configuration of the add-ons, you can use the web-based management interface.
What is the default network configuration of the IPFire?
Red. Descriptions of these networks are given below. Green + Red networks are the default network configuration of the IPFire.
