Complete the following steps to get remote access to a Qolsys IQ Panel 2:
- Obtain cellular monitoring. An alarm system can only connect with Alarm.com if it is receiving active cellular...
- Make an Alarm.com account. After activating the cellular communicator, the user's alarm monitoring company should...
- Download the app. In order to access Alarm.com remotely on...
Full Answer
How do I pair the iQ remote to the IQ Panel 2?
Once the IQ Panel 2 is in pairing mode and the IQ Remote is connected via the Access Point, immediately press the "Pair" button on the IQ Remote. If successful, the IQ Remote will be paired with the IQ Panel 2. When initially paired, the IQ Remote will download and install a "patch" file.
What is the iQ remote and how does it work?
The IQ Remote is a secondary tablet that pairs with the IQ Panel 4 and IQ Panel 2 Plus. Not only does it provide a way to arm and disarm your Panel and see sensor status, but it gives you the features you don’t get in your mobile app like chimes, emergency panics, and a siren.
Can the qolsys IQ Panel 2 connect to alarm via WiFi?
In these cases, the Qolsys IQ Panel 2 has a built-in Access Point that can be enabled to provide a connection between the two. Please note that when AP Mode is enabled, the Qolsys IQ Panel 2 loses its WIFI path, and it can no longer send communication signals to Alarm.com through WIFI.
What is the cost of the iQ remote secondary panel?
IQ Remote Secondary Panel $ 205.00 Double, Triple, Quadruple your IQ Panel experience A secondary touchscreen that replicates your main IQ Panel in up to 3 additional locations around the house.
How do I control my IQ Panel 2 on my phone?
The only mobile app that can be used with a Qolsys IQ Panel 2 Plus to control the system remotely is the Alarm.com Mobile App. This app allows you to arm and disarm your system, check its current status, control Z-Wave smart home devices, view Alarm.com Security Cameras, and more.
How do I connect my IQ Remote to IQ Box 2?
You can pair an IQ Remote with the Qolsys IQ Panel 2 by first putting the keypad and the system on the same WIFI network. Then simultaneously press the pair buttons on both devices to pair them. The panel and keypad can also be paired using an access point, but this will disable WIFI.
How many remote can be paired to the IQ Panel 2?
threeThe IQ Remote is a 7” secondary tablet that can be installed to create additional access to the IQ Panel 2. You can pair up to three (3) IQ Remotes with the IQ Panel 2.
What does IQ Remote 2 mean on an IQ alarm panel?
0:034:50IQ Panel 2: Pairing the IQ Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe IQ remote is the secondary tablet for the IQ panel - that allows you to easily control yourMoreThe IQ remote is the secondary tablet for the IQ panel - that allows you to easily control your security. And smart home system from different locations in your home or business you can touch swipe.
How do I access my IQ panel?
Swipe down to. access settings tray.Touch “SETTINGS”Enter your code.Touch “BLUETOOTH DEVICES”Touch “ADVANCED SETTINGS”Touch “ADD DEVICE” The panel will. begin searching for new devices in. ... Touch “Pair”When the messages appear on your phone and IQ Panel, ensure the numbers match and touch “Pair” on each.More items...•
How do I connect my IQ panel to my phone?
IQ Panel 2 - Bluetooth Disarm SetupEnable Bluetooth discovery in Android or iPhone Bluetooth settings.Swipe down from clock display for drop-down then press Settings.Press ADVANCED SETTINGS then enter Master Code.Press BLUETOOTH DEVICES then press SETTINGS.More items...
How do I add an IQ Remote?
Pair the Devices. From the home screen of the IQ Panel 2, press the small gray bar at the top center. Then go to Settings > Advanced Settings > enter the installer or dealer code (the default code is 1111 or 2222 respectively) > Installation > Devices > WIFI Device > IQ Remote Devices > Pair.
How do I reset my IQ Remote?
Your IQ Panel is not responding to screen touches or remote commands. If the LED's are lit but the system is not responding to touch or remote commands, you should perform a hard reset. Hold the HOME button for 30 seconds until the lights flash. Let go of the button and wait for the system to reboot.
How do I control my IQ on iPhone?
Open Alarm.com. Access the Alarm.com Mobile App, and use your Alarm.com Account credentials to access the service. You will then be able to control your IQ Panel 2 System using Alarm.com and your iPhone.
What is ADT IQ Remote?
The IQ Remote is a secondary tablet that pairs with the IQ Panel 2. Not only does it provide a way to arm and disarm your IQ Panel 2 and see sensor status, but it gives you the features you don't get in your mobile app like chimes, emergency panics, and a siren.
How do I reconnect my IQ Remote panel?
On the panel, go to Settings > Advanced Settings > Panel Reboot. On the Remote, hold the side button for a couple seconds and choose Reboot from the screen prompt. Wait until the Main panel has rebooted fully before triggering this. Rebooting both panels seems to have fixed the problem.
How many IQ remotes can be paired to the iQ4 panel?
Step 1. Note: Only one remote can be paired to your iQ4 at a time.
How do I pair my IQ remote?
Hold the remote close to the front of your iQ4. While the light on the remote is flashing blue, press the Bluetooth button on the front of the iQ4 (the Bluetooth button will start flashing). While the Bluetooth button on your iQ4 is flashing, press and hold down the Select button on the remote.
How do I reconnect my IQ remote panel?
On the panel, go to Settings > Advanced Settings > Panel Reboot. On the Remote, hold the side button for a couple seconds and choose Reboot from the screen prompt. Wait until the Main panel has rebooted fully before triggering this. Rebooting both panels seems to have fixed the problem.
How do I add an IQ remote?
Pair the Devices. From the home screen of the IQ Panel 2, press the small gray bar at the top center. Then go to Settings > Advanced Settings > enter the installer or dealer code (the default code is 1111 or 2222 respectively) > Installation > Devices > WIFI Device > IQ Remote Devices > Pair.
How do I reset my IQ remote?
Your IQ Panel is not responding to screen touches or remote commands. If the LED's are lit but the system is not responding to touch or remote commands, you should perform a hard reset. Hold the HOME button for 30 seconds until the lights flash. Let go of the button and wait for the system to reboot.
What is IQ Panel 2?
The IQ Panel 2 includes Wi-Fi and LTE radios that work together to create dual-path connectivity to the cloud.
How many phones can you pair with IQ Panel 2?
Every IQ Panel 2 includes a bluetooth radio that allows you to pair up to five smart phones or tablets for Bluetooth Touchless Disarming.
What is the Z wave on IQ Panel 2?
Every IQ Panel 2 includes Z-Wave Plus, a special technology that allows you to use up to 128 smart home devices like lights, locks, thermostats, garage openers, and more.
Does IQ Panel 2 have S line?
Every IQ Panel 2 includes the ability to pair with S-Line encrypted sensors, providing secure authentic ation for doors , windows, and each room of your home .
Does the IQ 2 Panel have a camera?
Every IQ 2 Panel includes a built-in camera which captures disarm photos along with the date, time and who disarmed the Panel, and sends them directly to your smartphone.
What is an IQ remote?
The IQ Remote is a security alarm and home automation screen only. It absolutely respects your privacy. Some other smart displays are trojan horses into your home and feed personal data back to search engine and retail companies so they can target advertising at you and sell you more stuff.
How many rooms can you use the IQ remote?
The IQ Remote touchscreen gives you convenient access to your security and home automation system in up to 3 additional rooms.
Can you view live video on IQ doorbell?
You can view live video from the doorbell on your IQ Remote secondary panel but talking the visitor with audio is currently only possible on the main IQ Panel, not the IQ Remote.
