If not go to the mobile settings on your dvr for username leave as admin,....type a password that you can remember,this password doesn't have to do nothing with your login password of dvr,,,,use default mobile port or use a different one,open this port on your router settings and try to connect....Good luck ricomercado Answered Sep 16, 2013
Full Answer
Where can I download the iWatch DVR app?
Get iWatch DVR - Microsoft Store Download this app from Microsoft Store for Windows 10 Mobile, Windows Phone 8.1, Windows Phone 8. See screenshots, read the latest customer reviews, and compare ratings for iWatch DVR. Download this app from Microsoft Store for Windows 10 Mobile, Windows Phone 8.1, Windows Phone 8.
Why can't I access my DVR from outside the network?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
How do I connect my DVR to my router?
If you get a reply back then you are good to move on to opening the ports on your router to allow the DVR to be accessible remotely. To do this you will need to open some ports in your router, this is done through a web browser. Open any browser of your preference and in the address bar type the IP address of your router/gateway.
Why is linklink not working on my AT&T DVR?
Link Failure over Mobile Users accessing the DVR using AT&T Broadband Network iCatch's analysis shows that AT&T has built some proxy or firewall for mobile network traffic using TCP port 80. If the traffic does not comply the HTTP specification, the proxy or firewall will drop or cancel link to port 80.
How can I access my DVR remotely?
How to Remote Access a DVRCreate and Configure a Dynamic DNS Account.Set Up a Dynamic DNS on the Router.Connect the MPEG-4 DVR and Locate the DVRs IP Address.Setting up a Virtual Service on the Router.Install the Remote Viewer Software for Remote Internet Access.
How can I access my DVR without port forwarding?
How to view a WinBook DVR Remotely Without Port ForwardingMake sure the WinBook DVR is connected to the router with an Ethernet cable.Right click and select Main Menu.Log in to the DVR. ... Click Advanced.Click Network.Set type to DHCP.Click UPNP.Enable UPNP and click OK.More items...
How do I set up my iWatch DVR?
0:002:02How to Configure iWatch DVR 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first off you start in the name box. And click on the name box and bring up the text we're justMoreSo first off you start in the name box. And click on the name box and bring up the text we're just going to call this TV our. Simply. Then host if we had this configured for external.
How do I find the public IP address of my DVR?
If you are unsure of what your DVR LAN IP address is, you can find this by accessing the Network Setup menu from the DVR. Press the 'Setup' button. Enter the system password and press 'Enter'. Select 'System Setup' and press 'Enter'.
How can I watch CCTV from anywhere from the Internet app?
How to view your IP camera remotely via a web browserFind your camera's IP address. ... Open a web browser and type the IP address. ... Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.After you change the port, you will need to reboot the camera in order to save the changes.More items...•
How do I connect my DVR to the Internet wirelessly?
0:102:02CCTV Tutorial How to connect DVR & NVR to WiFi - YouTubeYouTubeStart of suggested clipEnd of suggested clipOption you need to enable the dhcp. Click on apply once you click on apply click on search option toMoreOption you need to enable the dhcp. Click on apply once you click on apply click on search option to scan your network.
What is iWatch DVR?
iWatch DVR is a H. 264 DVR remote viewer. It can be viewed in landscape or portrait mod after filling in IP, Port, Username, and Password.
How can I remotely access my DVR without static IP?
Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port - By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.
How do I connect my DVR to my local network?
Connect Your DVR to Your LAN | Basic Network ConnectionGo to the COMMAND PROMPT. ... Figure 3 shows a computer screen with the command prompt, and the PROGRAM FILES folder is open. ... Write down the IP numbers shown under IP ADDRESS (192.168. ... Now get the IP Address of the security DVR.More items...
How do I pair my Iwatch to my new iPhone?
Need more help?Erase your Apple Watch.Set up your new iPhone and sign in to iCloud. ... Open the Apple Watch app on your new iPhone, then pair your watch with your new iPhone.Try to restore from a backup. ... Follow the onscreen steps to finish setting up.Start using your Apple Watch with your new iPhone.
Can an Apple Watch be set up without an iPhone?
Family Setup in watchOS 7 and later lets family members who don't have their own iPhone enjoy the features and benefits of an Apple Watch.
Can you answer calls on Apple Watch without phone?
A Wi-Fi or cellular connection lets your Apple Watch do the following things, even if your iPhone isn't with you. Use Siri to get directions, send iMessages, and more. Send and receive messages. Make and answer phone calls.
How do I re pair my Apple Watch?
Press and hold the Digital Crown while your Apple Watch is in pairing mode. Tap Reset when it appears on your watch. After your watch resets, you can pair again.
What is an Apple TV?
The Apple TV, HomePod, or iPad acts as a home hub that lets you communicate with your accessories when you’re away from home.
Can you use Homekit on an Apple TV?
If you have an Apple TV (3rd generation or later), HomePod, or an iPad (iPadOS 13 or iOS 10 or later) that you leave at home, you can remotely access HomeKit-enabled accessories from your iPhone and your paired Apple Watch. The Apple TV, HomePod, or iPad acts as a home hub that lets you communicate with your accessories when you’re away from home.
How to access DVR from outside network?
The default username is admin and the password is admin. Click login, then you will see the page of your Web Service. To access the DVR from outside the network or externally, the steps will be the same but the IP address will be your external IP address.
What is the IP address of a DVR?
By default ALL of our recorders and IP cameras have the same IP address. The default IP address is 192.168.1.108.
How to know if your DVR is on the same network as your home network?
First, you must review your network scheme to identify if your DVR or IPC (IP camera) is within the same network scheme as your Home/Office Network. There are a few ways to identify your network by simply going to the “Command Prompt” in your Windows PC.
What happens if you assign an IP address to a DVR?
This is due to the fact that if you assign an IP address to the DVR, NVR or IP camera that is already being used by a computer (hard wired or wireless), printer, or even a wireless handheld device you will have a collision in your network and you will not be able to access the device. In the next step I will show you how to see what IP addresses are available for you to use with your Digital Video Recorder.
How to find out if an IP address is being used by another device?
To find out if an IP address on your network is being used by another device, you can simply “ping” the IP address in mind and see if you get a reply back.
Can I access my DVR from my router?
Make sure you access the DVR while you are not inside the location as the DVR, due to the fact that many routers will not allow you to access internal devices from within the network using the external IP Address. I hope these steps will guide you through setting up your Network devices and DVR for remote access.
What is the desktop app for DVR?
The Desktop App called iWatch is used to manage your DVR over your Windows or Apple Computer. Download the Desktop App from HPI’s
What is the app called for iCatch?
The Mobile App called SoCatch is used to manage your iCatch DVR over your mobile device, phone or tablet, at to your Apple App Store / Google Play store / Windows Phone 7 or by searching for “SoCatch“.
How to connect 3G modem to DVR?
If users slot the 3G USB Modem before DVR start up, it will dial up automatically when DVR start up ; if users slot the 3G USB Modem after DVR start up, it has to connect to internet manually, users could dial up after click "OK" button in Network Setting of Main Menu.
Why does my DVR keep beeping?
For new DVR, if you don't install H.D.D or you forgot to format H.D.D, the DVR will keep beeping.
What is the remote ID of a one to one?
Verify whether is one to one or one to four, if one to one, the remote id should sets to "0", if one to four, th remote id is "1".
What port to open for QuickTime?
Open port 554 and 8000 and forward them to dvr and install quicktime software in remote pc.
