What is a Kwikset smart lock?
Kwikset smart locks are offered by leading smart home solution providers and security systems. A total home security solution begins with a Kwikset smart lock. Complete your smart home today! Automatic door locking feature after 30 seconds for peace of mind Fits standard doors (1-3/8" to 2") - replaces any deadbolt for keyless entry convenience
What is the difference between Kwikset PREMIS and Smartcode 916?
Kwikset Premis: The Kwikset Premis bears an uncanny resemblance to the SmartCode 916, but it differs by offering Apple HomeKit compatibility and PIN code scheduling. You can control the lock locally if you have an iPhone, but you need a HomeKit hub for remote access.
Is the Kwikset Aura a good budget smart lock?
One shared feature with Halo we dislike is the poor battery life, which lasts only a few months before you need new batteries. Overall, we like the Kwikset Aura as a solid budget smart lock, but it's up against intense competition. The Wyze Smart Lock is cheaper and has remote access, but the Kwikset Aura has a better keypad and overall appearance.
Which Kwikset Smart locks work with Alexa and Google Assistant?
Wi-Fi: The Halo and Halo Touch both use Wi-Fi to connect to your home network so you can control the locks remotely using the Kwikset app. These are also the only Kwikset smart locks that work directly with Amazon Alexa and Google Assistant. Bluetooth: The Aura's Bluetooth also works without a hub but without the remote controls of Halo.
Is there an app for Kwikset Smartcode 910?
The Premis App gives you control in the palm of your hand. Manage user codes, track lock status, receive lock notifications and more through the Kwikset Premis app.
How do I connect my Kwikset Smartcode 910?
How to add a user code on my Smartcode touchscreen?Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.Press Checkmark symbol once.Enter Mastercode.
Can I connect Kwikset lock to my phone?
Yes, if the user has a compatible Apple device with correct iOS installed, they can be “invited” to share the control of the lock via Premis app.
How do you open a Kwikset smart lock without the code?
1:353:51How to Open a Kwikset Smart Key Lock in 10 seconds Video by Mr ...YouTubeStart of suggested clipEnd of suggested clipIt. I'm right-handed but i'm doing this my left hand uh here's the force. Tool. Put it in i like toMoreIt. I'm right-handed but i'm doing this my left hand uh here's the force. Tool. Put it in i like to use just a pair of vice grips on the end. Just force it over take my tool. Out.
Does Kwikset have an app?
Yes – The app is available for select Android devices.
How do I use Kwikset Home Connect?
1:012:46Kwikset Home Connect Deadbolt Locks with Z-Wave TechnologyYouTubeStart of suggested clipEnd of suggested clipWhen using the app to lock the door as a safety precaution simply lock the door and arm the alarm.MoreWhen using the app to lock the door as a safety precaution simply lock the door and arm the alarm. Separately. When you come home use the app and maybe start by turning on a light with z-wave.
How do I connect my Kwikset lock to Bluetooth?
0:072:17Kwikset Halo - Programing/Sync and Set Up - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst um so i'll do that by holding the a button for three seconds uh which will turn on the lights.MoreFirst um so i'll do that by holding the a button for three seconds uh which will turn on the lights. And so now we can see that lock on bluetooth.
How do I set up Kwikset Bluetooth?
Bluetooth is required for the lock to work with your phone, whereas location will at least improve the technology used, according to Kwikset. When you arrive at the main screen, tap on the plus button in the top-right corner of the screen. Select “Set Up a Device”. Tap on “Pair a Device” at the bottom.
How do I connect my iPhone to Kwikset?
0:072:33Kwikset Aura - How to Sync/Program lock? - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover i'm going to click the next button. And it's going to say click the a button for three secondsMoreCover i'm going to click the next button. And it's going to say click the a button for three seconds. So hold it one two three all right and i'm going to release when i hear that beep. So i did that.
How do I unlock my Kwikset Smart lock from the outside?
Kwikset SmartCode locks are available as lever sets or deadbolt locks. Our sample is a deadbolt version which has a motor-driven deadbolt. Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor.
How do you bypass a Kwikset digital lock?
0:521:51Anyone Can Bypass The Kwikset Powerbolt 2. SHARE! People need ...YouTubeStart of suggested clipEnd of suggested clipYou press the number three you press the lock button. And then you press one two three four. AndMoreYou press the number three you press the lock button. And then you press one two three four. And press lock button it beeps twice you know it's got clear so let's try it. Out.
Can Kwikset SmartKey locks be picked?
The overwhelming majority of these trained professionals can't do it. Even one of Kwikset's most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick.
How do you put a Kwikset lock in pairing mode?
0:072:33Kwikset Aura - How to Sync/Program lock? - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover i'm going to click the next button. And it's going to say click the a button for three secondsMoreCover i'm going to click the next button. And it's going to say click the a button for three seconds. So hold it one two three all right and i'm going to release when i hear that beep. So i did that.
How do you reset a Kwikset 910?
How to perform a factory reset:Remove the batteries.Press and hold the lock button on the keypad.Place the batteries back in (while still holding the button)The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.
How do I reprogram my Kwikset SmartCode?
0:394:14Kwikset Smartcode 888 - How To Program The Keypad - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe'll press in the keypad that we just programmed. And it should open up just like that the deadboltMoreWe'll press in the keypad that we just programmed. And it should open up just like that the deadbolt retracts. And you can walk into the house with your keycode.
What is the master code for Kwikset?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
What is the Z wave on a smart code 910?
Our SmartCode 910 Z-Wave locks' biggest improvement is that the lock includes a Z-Wave 500 module card in it , which can connect to a Z-Wave compatible hub within a wider range. For improvements on the lock battery life and performance, we recommend using fresh name-brand alkaline batteries.
What is the drive in latch for a 910?
The correct drive-in latch for the SmartCode 910 is model # 83186-001. If you've already purchased the lock and need this part, please contact our Support Team for assistance at 1-800-327-5625.
How do I delete all user codes on my SmartCode?
Deleting All User Codes with the Mastercode Enabled1. Keep door open. Press the Program button once. The keypad will flash green and you will hear three beeps.2. Press Lock button once.3. Enter Mastercode4. Press Lock button once5. Press “9” six times.6. Press Lock button once7. Press “ 9” six times.8. Press Lock button once.If programming is successful, the keypad will flash green once with one beep.If programming is unsuccessful, the keypad will fl ash red three times with three beeps. Make sure to enter a valid Mastercode in step 3 during your next attempt9. Press the Lock button while the door is open and unlocked. If the latch bolt does not extend to lock, then all codes have been successfully deleted.
How to add a user code on my Smartcode touchscreen?
Adding User Codes with the Mastercode EnabledThe procedure for adding user codes is different when the Mastercode is enabled. For instructions on how to add user codes when the Mastercode is disabled, see the Installation and User Guide that came with your lock.1. Keep door open. Press the Program button once. The Checkmark will flash five times and you will hear five beeps.2. Press Checkmark symbol once.3. Enter Mastercode.4. Press Lock symbol once5. Enter new user code.6. Press Lock symbol once.If programming is successful, the Checkmark will illuminate and you will hear one beep.If programming is unsuccessful, the “X” pattern will flash three times with three beeps. Make sure the user code is not a duplicate and that it is between 4 and 8 digits during your next attempt. Make sure the lock has room for an additional code. If all user codes are filled, delete a code to make room for this one. Make sure to enter a valid Mastercode in step 3.7. While the door is open and locked, test the user code to make sure it unlocks the door.Adding User Codes with the Mastercode DiabledProgramming TimeoutDuring programming, if the screen is not pressed for 20 seconds, the system will time out (indicated by three beeps and the “X” pattern flashing three times), and you will need to restart the procedure.1. Make sure the door is open. Press the Program button once.2. Press checkmark symbol once.3. Enter user code. A total of 16 user codes may be programmed. Each user code must be a unique code between 4 and 8 digits.4. Press lock symbol once.5. Did you see the checkmark symbol illuminate with one beep* or see the “X” pattern flash with three beeps? (*Beeping sound will only be heard if switch #3 (on the lock interior) is in the on positon.) Checkmark symbol with one beep - Programming was successful.“X” pattern with three beeps - Programming was unsuccessful. Make sure the user code is not a duplicate and that it is between 4 and 8 digits during your next attempt. Make sure the lock has room for an additional code. If all user code positions are filled, delete a code to make room for this one.
Do smart code deadbolts have a tapered bolt?
SmartCode deadbolts require a tapered latch bolt for ease of operation. If the latch being used is from an older lock, it will likely not have a tapered latch bolt. Remove the lock from the door, including the old latch. Replace with the new tapered latch that came with the lock and reinstall the lock.
How many codes can a ZWave lock have?
The lock can have up to 30 different user codes between 4 and 8 numbers long that can be set up either manually or through a smart home App when paired with a zigbee or zwave device otherwise it is just 2 on a standalone lock. The recommended method is to use your zigbee or zwave device. It is easy to see why this is the preferred method as manually involves pressing the programming button at the back of the door and the numbers at the front of the panel.
Can you use the locking and unlocking of the door to arm/disarm your security system?
You can use the locking and unlocking of the door to arm/disarm your security system when it is added to the controller that controls the security system and manage your lights and thermostat in the same way. This does depend on the system you’ve set up and it’s capability.
Can you use a smart lock with a home automation system?
This is a smart lock you can rely on to help you monitor, control and secure your home with home automation integration. It’s great that you can use it with a number of different home automation controllers and is not restricted to just a single controller.
Is Kwiset 910 a good security system?
The Kwiset 910 could be a great fit for you if you are looking for basic access codes access for your family (up to 30 total) or are already using a Zigbee or Z-Wave smart home hub or security offering.
Does Kwikset 910 work with Alexa?
These hubs integrate with the Kwikset 910 locks and will provide Alexa integration and help connect your door to other security or other products in your home for a complete smart home system.
How many buttons are there on a Kwikset smart code?
The physical buttons on SmartCode models come in arrangements of 6 or 11, depending on the number of buttons you want for your lock. SecureScreen: Kwikset's touchscreen locks like the Halo, Premis, and SmartCode 916 have a nifty security feature that requires you to touch two random numbers before entering your code.
How many pin codes does Kwikset have?
Number of PIN codes: Most Kwikset smart locks top out at 30 user codes, but Halo and Aura support up to 250 codes thanks to their direct communication with mobile apps. The Halo Touch supports up to 100 fingerprints across 50 users.
What is the most attractive smart lock?
We say this without reservation: the Kwikset Obsidian is the most attractive smart lock you can buy. This compact touchscreen slab is so simple but looks stunning. It gets away with this because there's no keyhole.
What is a Kwikset Halo Touch?
The Kwikset Halo Touch is the company's latest smart lock design and the first with a fingerprint sensor for quick unlocking. During our tests of this lock, the fingerprint sensor was lightning fast and easy to figure out—plus it's a bit more secure than a keypad. We like that you can add up to 50 users to the system, which stores up to 100 fingerprints.
What locks work with Samsung smart hubs?
Z-Wave and Zigbee: Kwikset SmartCode and Obsidian locks work with smart hubs like Samsung SmartThings or a home security system like Abode or Blue by ADT. By linking to these platforms, you can control the locks remotely and adjust settings with your phone. Without a hub, you need to program the devices manually using the keypad.
How long does it take to install a Kwikset door lock?
Installation: You can install a Kwikset smart door lock in about 20 minutes or less using a simple screwdriver—there's no drilling or complex wiring. SmartKey: Except for the Obsidian—which doesn't have a keyhole—you can rekey your Kwikset locks to use a different key using a special tool.
What is the style of Kwikset lock?
Kwikset lock styles. You can choose between traditional (rounded) and contemporary (straight edges) styles on most Kwikset smart locks, depending on your tastes. The Halo and Aura sport distinctive styles similar to the contemporary design but aren't available in a traditional style.
Product Overview
The SmartCode touchpad smart lock with Home Connect technology enables the lock to wirelessly communicate with other devices in home. The lock allows the user (through a web enabled device) to remotely check the door lock status, lock or unlock the door and receive notifications. SmartCode is a one-touch locking motorized deadbolt.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
