1.1 The Lantronix Remote Access Server The Lantronix Remote Access Servers (LRS16 and LRS32F) allow packet traffic between your network and remote networks or computers. The servers use modems to offer attached devices as services to the network, and conversely, can provide connections to other devices on the network.
Full Answer
How do I configure Lantronix Provisioning Manager with SFTP or FTP?
Select either SFTP or FTP. If you select SFTP, you can use either an external SFTP server, or allow Lantronix Provisioning Manager to act as the SFTP server. If you select FTP, you must use an external FTP server. For the external server options, complete the server address, username, password, and path fields as required.
How do I change device credentials in Lantronix Provisioning Manager?
Select the type of devices to use with Lantronix Provisioning Manager. Choose All Devices, IOT Gateways, or REM Devices (Remote Environment Management Devices). Click the edit button to select a credentials file; this is a .CSV or .TDI file containing device credentials. Click Save or press Enter to save the settings.
How do I change the timeout settings in Lantronix Provisioning Manager?
Click Save or press Enter to save the setting. Click the edit button next to each of the settings you wish to change. Configure the timeouts in seconds of Lantronix Provisioning Manager actions and the maximum number of retries. Click Save or press Enter to save the setting.
What are the possible instance names for a remote connection?
Possible instance names are "Accept" and "Connect <n>", where <n> is the Host number, for example "Connect 1". Shows and updates current status every second. Press any key to stop. Shows current status. Returns to the previous level. Possible instance names are "Accept" and "Connect <n>", where <n> is the Host number, for example "Connect 1".
What is Lantronix used for?
Lantronix Device Servers enable M2M communications either between the computer and serial device, or from one serial device to another over the Internet or Ethernet network using “serial tunneling.” Using this serial to Ethernet method, the “tunnel” can extend across a facility or to other facilities all over the globe ...
How do I connect my device to Lantronix?
Open a terminal program.Select the COM port being used (can check device manager if unsure).After setup.Cycle power to the Lantronix box.Hold down x while box boots up (must be done within 3 seconds of startup of Lantronix box).Makes changes and save.Test for communication.
How do I find my Lantronix IP address?
Open the DeviceInstaller software from the Lantronix folder in your All Programs. DeviceInstaller will automatically scan for any Lantronix devices on the network, the IP address will show under the description of the device.
What port does Lantronix use?
All MSS products use port 3001 for channel 1 and 3002 for channel 2. All CoBos products (UDS, CoBox, and XPress) and XPort products use port 10001 for channel 1 and 10002 for channel 2.
How do I telnet into a Lantronix device?
StepsSet or change the Baud Rate to 19200 for a Galaxy display.Set I/F mode to 4C.Flow Control will be none or [00] then press enter.Connect mode should be [C0], if not adjust to C0, then press enter.Set the Port to [03001] then enter.Remote IP Address [None].Remote Port [00000].More items...
How do you reset Lantronix?
How to reset a Lantronix Spider KVM to factory defaultsFind which COM Port you will plug the Lantronix on. Open start button, type 'devmgmt. ... Open a Hyperterminal. Open PuTTY, select the Serial option and type the dedicated port the press open. ... Connect the Lantronix.
What is a serial device server?
A serial server is a networking device that transfers data between an Ethernet local area network and a computer's or a device's serial port (COM port).
What is a universal device server?
The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet.