Remote-access Guide

linksys router setup wrt54g remote access

by Wellington Goyette Published 2 years ago Updated 2 years ago
image

Linksys WRT54G Wireless-G Broadband Router

  1. Begin setup of your Linksys Wireless Router by first plugging in the power. ...
  2. Next open a web browser window on the connected computer and type http://192.168.1.1 into the address bar and press enter. ...
  3. You should see the Setup page shown below. ...

Part of a video titled How to Remote Access a Linksys Router - YouTube
0:31
2:37
192.168. 1.1 it's going to ask you for the username. And password the default username and passwordMore192.168. 1.1 it's going to ask you for the username. And password the default username and password for linksys router is admin. Admin then you have to go to administration.

Full Answer

How to configure Linksys wireless router?

Part 2 Part 2 of 4: Setting up a Wireless Network

  1. Check your Internet settings. In the Internet, Setup, or Home menu of your router, check that your Internet IP address, DCHP, and DNS settings are all set.
  2. Open the Wireless settings. This menu may be called Wireless, Wireless Settings, Basic Setup, or something similar.
  3. Name your network. ...
  4. Choose your wireless encryption. ...
  5. Choose a passphrase. ...

More items...

How do I log into my router?

  1. Tap to open the Settings app.
  2. Tap Wi-Fi.
  3. Tap on your network.
  4. Write down the number displayed next to Router. That is the private IP address you need to access the router’s settings.

How do I Find my Linksys router password?

When you have the information you need, follow these steps to find your router's default password:

  • In a web browser, go to the Router Passwords site.
  • Choose your router manufacturer from the dropdown list, then select Find Password.
  • Look for your router model. The password will be listed in the far-right column.

How to reset Linksys wireless router?

Method 1 Method 1 of 2: Using the Reset Button

  1. Power off your computer.
  2. Unplug your router.
  3. Wait 60 seconds and plug it back in.
  4. Locate the small button labeled Reset. ...
  5. Straighten a paper clip. ...
  6. Press and hold the "Reset" button. ...
  7. Wait for the "Power" light to stop blinking. ...
  8. Power on your computer.
  9. Open a Web browser to test for an Internet connection. ...

image

How can I access my Linksys router remotely?

Enabling Remote Management on a Linksys routerAccess the router's web-based setup page. ... On the setup page, click Administration.For added security, change the Router Password and re-enter to confirm.Look for Remote Management and click Enabled.Click Save Settings.Access the router's web-based setup page.More items...

Can a Linksys WRT54G be used as an access point?

You can also have a look at the famous Linksys WRT54G. From here on you have several options, you can either use the router as a wireless repeater, a wireless access point or to create a wireless bridge.

Can I access my router settings remotely?

All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.

Can I use my old router as an access point?

Many routers in the last few years can work in Access Point mode which can be turned on using the interface. Note: Some Wi-Fi routers feature an Access Point mode (you'll see that in its features list if it does). If that's the case for your Router B, you can just turn this mode on and it will start working as an AP.

Can a Linksys WRT54G be used as a repeater?

The Wireless Repeater mode will turn the access point into a wireless repeater to extend the range of your signal. The WAP54G will work as a wireless repeater with the following devices: Linksys Wireless-G Access Point (WAP54G) Linksys Wireless-G Router (WRT54G)

How can I control my WIFI remotely?

0:091:36How to Control Your Network from Anywhere with your Android PhoneYouTubeStart of suggested clipEnd of suggested clipYou can select as cific device to see detailed information about the device block the device fromMoreYou can select as cific device to see detailed information about the device block the device from accessing the internet or even see the devices web.

Can I connect to my home network from anywhere?

You'll need to dig into your router settings and set up port forwarding for all the services you want to access from outside your home network. The same goes for any services hosted by the router itself.

Can I access my router from my phone?

In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.

How do I access my router settings without Internet?

3 AnswersConnect a wired ethernet cable from your computer to the router.Connect it to the LAN, the ports numbered 1,2,3,4. ... You may want to check if your network card is set to DHCP, Start -> Run -> ncpa.cpl -> right click NIC -> Properties -> Internet Protocol (TCP/IP) -> Properties.More items...•

How do you I access my router settings?

Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the Cog icon. Step 2: With the Settings panel open, tap Network & Internet. On Samsung phones, tap Connections instead. Step 3: Tap Wi-Fi.

How much does a Linksys WRT54G router cost?

Most computer retailers offers the Linksys WRT54G Wireless Router for about $49 and Wireless Access Points for $99 . Why waste $50 if you don't have to? You can convert a wireless router to become a simple access point if that's all you need. This is not an article on how to create a wireless-to-wireless bridge, as some have misinterpreted it to be. It is just to add a simple wireless access point to an existing wired network.

How to connect a Linksys router to a new router?

Disconnect the existing network cable from the network jack of your PC , set it aside for now. Take a new cable and plug into LAN port #2 on the new Linksys router and the other end into the network jack of your PC.

How to reset a router?

Press and hold the RESET button on the new router for 30 seconds. Resetting ensures that any customized settings are erased and the router is returned to factory defaults. This usually isn't required on a new router, but if you suspect the router was returned and resold to you, it may not function as expected without resetting first (this is also the only way to access the setup page if you forget the login username and password). Consult the manual for the location of the reset button, as it varies depending on model - but is usually found on the rear panel near the power jack.

How to set up SSID on a router?

Go to the Wireless Configuration page and start configuring the wireless options , such as Wireless SSID - Do not use "linksys", pick something else, like "charlie". The SSID must match that of the primary router and the channel must be different than that of the primary router (Channel 1 for primary router and 6 or 11 for secondary router are good choices as they are separated enough by frequency).

How long is a wireless security key?

In the Wireless security settings page, use "WPA-Personal" level security at minimum, and a wireless security key at least 8 digits/letters long and you are done. Use of your cell phone number can be a good security key choice, as these numbers are not listed in any directory, etc. Save the settings. ...

How to tell if router is powered up?

Power the router. Plug the power supply into the AC mains and the output cable and plug into the power jack on the rear of the router. One or more lights should become illuminated on the front to indicate it has been successfully powered up.

What happens when you save settings on router?

Save the settings, the router will restart.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9