To enable PCs attached to the main router to be able connect to PCs attached to the wrt54g: Login into the wrt54g using telnel or ssh by running the command "telnet 192.168.0.129" and use same root/passwd as for the web interface. Then type this command (copy it exactly):
How to configure Linksys wireless router?
Part 2 Part 2 of 4: Setting up a Wireless Network
- Check your Internet settings. In the Internet, Setup, or Home menu of your router, check that your Internet IP address, DCHP, and DNS settings are all set.
- Open the Wireless settings. This menu may be called Wireless, Wireless Settings, Basic Setup, or something similar.
- Name your network. ...
- Choose your wireless encryption. ...
- Choose a passphrase. ...
How do I log into my router?
- Tap to open the Settings app.
- Tap Wi-Fi.
- Tap on your network.
- Write down the number displayed next to Router. That is the private IP address you need to access the router’s settings.
How do I Find my Linksys router password?
When you have the information you need, follow these steps to find your router's default password:
- In a web browser, go to the Router Passwords site.
- Choose your router manufacturer from the dropdown list, then select Find Password.
- Look for your router model. The password will be listed in the far-right column.
How to reset Linksys wireless router?
Method 1 Method 1 of 2: Using the Reset Button
- Power off your computer.
- Unplug your router.
- Wait 60 seconds and plug it back in.
- Locate the small button labeled Reset. ...
- Straighten a paper clip. ...
- Press and hold the "Reset" button. ...
- Wait for the "Power" light to stop blinking. ...
- Power on your computer.
- Open a Web browser to test for an Internet connection. ...
How can I access my Linksys router remotely?
Enabling Remote Management on a Linksys routerAccess the router's web-based setup page. ... On the setup page, click Administration.For added security, change the Router Password and re-enter to confirm.Look for Remote Management and click Enabled.Click Save Settings.Access the router's web-based setup page.More items...
Can a Linksys WRT54G be used as an access point?
You can also have a look at the famous Linksys WRT54G. From here on you have several options, you can either use the router as a wireless repeater, a wireless access point or to create a wireless bridge.
Can I access my router settings remotely?
All you need to do is type the router IP or default gateway address in the web browser. Next, enter your username and password. Now, once you are in the router's web portal, look for the Remote Management option. Some routers called it Remote Access and it's usually found under Advanced Settings.
Can a Linksys WRT54G be used as a bridge?
This tutorial, based on the DD-WRT Wiki, will go over how to configure DD-WRT for use as a wireless bridge (client bridge mode), using a Linksys WRT54G router as an example. The process is fairly straightforward but will require some time and patience to complete.
Can I use my old router as an access point?
Many routers in the last few years can work in Access Point mode which can be turned on using the interface. Note: Some Wi-Fi routers feature an Access Point mode (you'll see that in its features list if it does). If that's the case for your Router B, you can just turn this mode on and it will start working as an AP.
How do I use my old Linksys router as a range extender?
Click Connectivity.Click Internet Settings.Click Edit.Select Wireless Repeater.Enter the main router or access point's Network name (SSID), Network band and Security mode.Click to save settings. Click Yes to continue.
How can I control my WIFI remotely?
0:091:36How to Control Your Network from Anywhere with your Android PhoneYouTubeStart of suggested clipEnd of suggested clipYou can select as cific device to see detailed information about the device block the device fromMoreYou can select as cific device to see detailed information about the device block the device from accessing the internet or even see the devices web.
Can I access my router from my phone?
In Android, settings menus vary from phone to phone, but once you find the Wi-Fi settings: Make sure your phone is connected to your router's Wi-Fi network. Tap on the network name. Look for a 'gateway', 'router' or other entry in the list.
What is the difference between bridge mode and wireless bridge?
5:356:59Wireless Bridge Mode - Networking - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell what is bridge mode well bridge mode does the same thing that wireless bridge mode does but theMoreWell what is bridge mode well bridge mode does the same thing that wireless bridge mode does but the only difference is is that with bridge mode the routers are connected. Using a cable.
How do I make my Linksys router a wireless bridge?
Click the "Connectivity" link in the "Router Settings" section, open the "Internet Settings" tab, and select the "IPv4" option. Choose "Bridge Mode" under "Type of Internet Connection," select "Obtain an IPv4 address automatically," and click "OK" to enable bridge mode.
Is Bridge mode the same as access point?
The distinction is important: A wireless access point connects users to a network by creating a wireless signal they can use. A bridge, in contrast, connects separate networks —your preexisting wireless home network to all of the devices connected to the bridge.
How do I setup a Linksys router as an access point?
Connecting an access point to a Linksys wireless routerOpen the access point's web-based setup page by entering the default IP Address “192.168. ... On the web-based setup page, click on Wireless.Enter the Network Name (SSID).Click Wireless Security and select your desired Security Mode.
How do I setup my Linksys WRT54G router?
How to Set Up a Linksys WRT54G Wireless G RouterStep 1: Connect the Modem. Plug the Ethernet cable from your cable or DSL modem into the Internet port on the router. ... Step 2: Connect Your Computers. ... Step 3: Connect the Power. ... Step 1: Log In. ... Step 2: Open Wireless Settings. ... Step 3: Name the Network. ... Step 4: Set Up Security.
How do I connect to Linksys WAP54G?
Connect to a RouterConnect the Linksys WAP54G device to your Internet modem using the Ethernet cable.Type "admin" -- without quotation marks -- in the password field. Leave the user name blank. Click "OK" to access the WAP54G setup page.
How do I setup a repeater bridge?
Go to the wireless tab.Choose Repeater Bridge under wireless mode.Match your SSID and channel settings exactly to the main router you will be connecting to.Make sure bridged is selected.Click Save.