To set up remote access to your DVR / NVR using the Lorex Secure / FLIR Secure app:
- Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
- Tap Sign Up, then enter your email address and password to create a new account. ...
- Tap Add Device or tap the Plus icon ( ), then tap FLIR Security System.
- Scan the QR code on your DVR / NVR using the camera on your smartphone or tablet. ...
- Enter your login information. ...
- Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
- Tap Sign Up, then enter your email address and password to create a new account. ...
- Tap Add Device or tap the Plus icon (
Which IP cameras are compatible with a Lorex NVR?
Which IP Cameras are Compatible with a Lorex NVR?
- To get started we will need to log into the Lorex NVR and go to SETUP > REMOTE DEVICE > DEVICE SEARCH
- The NVR will search the current network for any cameras connected. You will simply need to select the the camera that you want to add to your Lorex NVR.
- The cameras should now be listed in the lower box and will connect automatically
How do I connect my NVR to my phone?
There are a few key points you should consider:
- Don’t bother with your local provider; the best deals can almost always be found online.
- Get a DIY security camera system. Modern systems are easy to set up and you can save a bundle by not paying an installer. ...
- Look for a supplier with a wide variety of cameras. ...
- Make sure the products all come with a warranty. ...
How to find the IP of a connected NVR?
To check your router port connections:
- Connect your Ethernet cable into a different port on your router.
- Power cycle your DVR / NVR. To power cycle your DVR / NVR, please power it off and disconnect the power source for approximately 30 seconds. ...
- If applicable to your system, look for a solid green light or flashing yellow light on the LAN port indicating connection.
How to install Lorex NVR hard drive?
- Power off the DVR / NVR system and unplug all cables. ...
- The DVR / NVR cover is secured with screws. ...
- Insert HDD screws (4×) into the HDD and tighten them half way.
- Place the HDD over the screw slots of an additional bay / port of your DVR / NVR on the bottom of the system and slide the HDD into place. ...
- Locate the extra SATA HDD connectors. ...
How do I access my NVR remotely?
How to set up an NVR for Remote Viewing (phone, tablet, computer)Understand your local network.Setup a DDNS account.Open the ports (Port Forwarding)Assign the DDNS to your NVR.Add to the phone and verify that the Remote Viewing works.
How do I view Lorex NVR on my PC?
To log in and set up your Lorex Client 11 software:Launch the Lorex Client 11 software on your computer.In the IP Address field, enter the DDNS or local IP address of your DVR.Enter your User Name.Enter the Password.Enter the Client Port value (default: 9000).Click Login.
Can you monitor Lorex cameras remotely?
Monitor your property from wherever life takes you. Our amazing apps allow you to remotely access your security camera system directly from your smartphone or tablet.
How do I connect to Lorex camera remotely?
1 Configure your router to enable access from the Internet. ... Step 1: Log into your Router's Administration Server. ... Step 2: Set up the Static IP address. ... Step 3: Create Data Path from Internet to Lorex Module. ... 2 Register for Dynamic Domain Name Service (DDNS)3 Configure the Lorex Module for DDNS and Password Access.More items...
Can I view Lorex on laptop?
Laptops can be used for viewing playback by downloading your DVR / NVR client software. Click here for downloads and documentation for your product.
Can you live stream Lorex cameras?
Live view one camera Launch the Lorex Home app, then tap Device Thumbnail to open Live View. Step 2. Live view your device. NOTE: On the Live View, you will see the current Date and Time.
How do I connect my Lorex NVR to my phone?
0:092:25How to set up Lorex HD Security System Mobile App for AndroidYouTubeStart of suggested clipEnd of suggested clipThe name of your DVR. And then tap connect to view live streaming video take note that the remoteMoreThe name of your DVR. And then tap connect to view live streaming video take note that the remote viewing resolution is set to SIF by default.
What's the difference between Lorex Cloud and Lorex Home?
This Lorex app will let you do specific things and configurations that you cannot on different apps. The Lorex Home request to create an account that provides unique access to the cameras different than the Lorex Cloud, where you can see your device just by downloading the app.
Does Lorex cameras have an app?
Lorex Home is a free mobile app that lets you view live and recorded video from your security cameras and change system settings from anywhere. Enjoy hassle-free remote access from any- where with no monthly fees. The Lorex Home app is compatible with both iOS and Android devices.
How do I get Lorex NVR online?
3:028:32Viewing Lorex cameras on Windows, Lorex camera digital zoom, Day ...YouTubeStart of suggested clipEnd of suggested clipAnd our Lorex system should pop up here it is right here so you need to know this number that's whatMoreAnd our Lorex system should pop up here it is right here so you need to know this number that's what you're gonna enter into the web browser. So I'll right-click on Chrome. And type in 192.168.
Can't connect to Lorex remotely?
Remote Viewing: Cannot connect to DVR / NVR from a remote location. If you are able to connect to your device ID at home, but not when you are at a remote location, check the firewall settings on your router. Sometimes router firewalls will block communication with devices outside of the local network.
How do I access Lorex DDNS?
Sign in to your Lorex recorder and click on the settings icon from the main menu. Choose Network from the pop-up options. Enter the DDNS account information from the Lorex DDNS confirmation email to activate DDNS.
How do I use Lorex cloud on my PC?
To log in and set up your Lorex Client 12 software:Launch the Lorex Client 12 software on you computer. ... Click DVR List > Add.Enter the following information: ... Click Change > Close.In the drop-down menu at the top of the screen, select your DVR, and then click the Refresh icon (
How do I find my Lorex camera IP address?
Access the main menu of the recorder after logging in as the admin user. The default login information can be found on a label attached to the top of the NVR or DVR. Click the Network option under the Setting section of the main menu. The default tab is the TCP/IP tab where the IP address setting is located.
What is my Lorex client port?
Name: Choose a name for your system of your choice. Client Port: Enter the Client Port (default: 35000). Username: Enter the NVR's User Name (default: admin).
How do I access my Lorex IP camera?
To connect IP cameras using a router or PoE switch:Right-click on the Live View to access the Quick Menu.Click Device Search.Log in using your administrator login information. ... Select the camera you would like to add. ... Click Add, the status indicator will turn green if the camera is successfully connected.More items...•
What is Lorex know for?
Lorex has been a provider of security cameras and security camera systems for over 30 years and is one of the most trusted names in the consumer se...
Why do I need Security Cameras?
Having security cameras for your home or business can provide you with many benefits. First, having visible security cameras can be an invaluable d...
What types of security products does Lorex sell?
Lorex prides ourselves on having a security solution for all types of properties and scenarios. We sell everything from 32-camera professional-grad...
How do I install Security Cameras?
Lorex security cameras and security systems are designed for DIY installation. The installation depends on the technology that the security camera...
Why Buy Security Cameras from Lorex?
There are many reasons why buying a Lorex security camera or security camera system is the right choice. With over 30 years of experience, our tech...
Have more questions?
Please see our Frequently Asked Questions article for more information about Lorex, our products, our technology, or our remote viewing apps. Learn...
How to set up Lorex NVR?
To set up remote access to your DVR / NVR using the Lorex Secure / FLIR Secure app: 1 Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet. 2 Tap Sign Up, then enter your email address and password to create a new account.#N#REMINDER: If you already have an account, enter your email address and password, then tap Log In. 3 Tap Add Device or tap the Plus icon ( ), then tap FLIR Security System. 4 Scan the QR code on your DVR / NVR using the camera on your smartphone or tablet.#N#REMINDER: If you cannot scan your code, tap the Pencil icon () and manually enter the device ID located beneath the QR code. 5 Enter your login information. Refer to your user manual for your default Username and Password. Click here for downloads and documentation for your product. 6 Tap Done and enter a new, secure 8-15 character password. This password will be used to connect to your LHB Series DVR system from now on.
How to scan QR code on DVR?
Scan the QR code on your DVR / NVR using the camera on your smartphone or tablet. REMINDER: If you cannot scan your code, tap the Pencil icon () and manually enter the device ID located beneath the QR code. Enter your login information . Refer to your user manual for your default Username and Password. Click here for downloads and documentation ...
Can Lorex connect to NVR?
You can use the Lorex Secure / FLIR Secure app on your smartphone or tablet to connect to your DVR / NVR System.
Where is my IP address on my DVR?
The IP address can be found in the Network menu or System Information menu of your DVR / NVR. Ensure the correct device ID, username, and password is entered. Test by scanning the QR code using another smartphone or tablet if possible.
How to power cycle a DVR?
To power cycle your DVR / NVR, please power it off (if applicable) and disconnect the power source for approximately 30 seconds. Reconnect, and power up the DVR / NVR. Ensure the unit is connected to a router using an Ethernet cable. Ensure that you are able to connect locally using the IP address. The IP address can be found in ...
How to connect a DVR to a TV?
Perform each of the following steps in sequential order to potentially resolve your connectivity issues. Scan your QR code and attempt to connect after each step: 1 Power cycle your DVR / NVR. To power cycle your DVR / NVR, please power it off (if applicable) and disconnect the power source for approximately 30 seconds. Reconnect, and power up the DVR / NVR. 2 Ensure the unit is connected to a router using an Ethernet cable. 3 Ensure that you are able to connect locally using the IP address. The IP address can be found in the Network menu or System Information menu of your DVR / NVR. 4 Ensure the correct device ID, username, and password is entered. 5 Test by scanning the QR code using another smartphone or tablet if possible. 6 If you are using another smartphone or tablet on the same network, disable WiFi on the extra smartphone or tablet. 7 In the Network menu, set the unit to DHCP. 8 In the Network menu, set DNS 1 to 8.8.8.8, and DNS 2 to 8.8.4.4. 9 Restore your DVR / NVR to default settings.#N#Restore default settings on an ECO Series DVR#N#Restore default settings on an LHV / LNR Series DVR / NVR#N#Restore default settings on an LHA / LNK Series DVR / NVR
How to connect a DVR to a new router?
Connect your DVR / NVR to the new router using an Ethernet cable. Power cycle your DVR / NVR. To power cycle, power it off (if applicable) and disconnect the power source for approximately 30 seconds. Reconnect, and power up the DVR / NVR. Your DVR / NVR will obtain a new IP address so that it is communicating with the network.
Do you need to update port forwarding rules for DVR?
Once you have restarted your system, remote connect to the DVR / NVR. If you were using port forwarding rules with you DVR / NVR system, it will also need to be updated. The rules assigned to the old router are not configured on the new router. Check the following:
