What is Lutron HVAC connect?
Provided by Lutron, and backed by trusted Honeywell HVAC technology, for temperature and humidity control in one powerful solution. Use Lutron keypads, in the space or through the Connect app, and timeclock events to control the Autonomic audio system.
How do I use Lutron audio interfaces?
Use Lutron keypads, in the space or through the Connect app, and timeclock events to control the Autonomic audio system. Change presets, adjust volume, enter party mode and store new presets all from these Lutron interfaces.
What is homeworks?
Control lights, shades and temperature in the comfort of your home or from anywhere in the world - the office, the airport, the beach – so lights aren't left on or shades aren't left open when you're away. HomeWorks works with smart home solutions from other best-in-class brands, for voice, audio, temperature control, and more.
Is Lutron thermostat compatible with ecobee?
Provided by Lutron, and backed by trusted Honeywell HVAC technology, for temperature and humidity control in one powerful solution. Enjoy the right temperature in the rooms you use the most, with the ecobee3 thermostat and remote sensors. Compatible with the ecobee3 HomeKit-enabled thermostat and all other ecobee Wi-Fi thermostats.
Does the Lutron App work remotely?
You can now use the app to control your Lutron lights, shades, temperature, etc. from inside or outside the house.
How do I connect my Lutron to my phone?
Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.
How does Lutron Homeworks work?
An occupancy/vacancy sensor automatically turns lights off when you leave the room, saving energy. Other controls, such as dimmers and blinds, let you create soft or task lighting. Dim outdoor lights for barbecues, outdoor dining – and save energy with one touch of a button.
How do I find my Lutron bridge IP address?
You can obtain the IP address of the bridge by using the app you have for your router (if your router has an app for it) or by using a network scanning app such as Fing or Discovery DNS-SD Browser. By using these apps you should be able to find a device named Lutron and locate the IP Address of the bridge under this.
Can I use Lutron without bridge?
A bridge is required if you wish to monitor or operate your Caséta products via a smart device or to integrate your system with other connected products such as smart speakers and thermostats. It is also required to create scenes or utilize timeclock scheduling of daily events. See key features listed below.
How do I add someone to my Lutron App?
You would have to start with the account that initially set up the Caseta system. From the app, go into Settings > Siri Integration > Edit Home & Users and choose "+ Add User". It will ask you for the email address of the person you want to add to HomeKit on your system.
How do you program Lutron homeworks?
1:289:47Lutron Homeworks QS Tutorial // How to Quickly Program Keypads using ...YouTubeStart of suggested clipEnd of suggested clipWe have a keypad by the entrance. Left. And right side of the bed. First. Let's program the buttonsMoreWe have a keypad by the entrance. Left. And right side of the bed. First. Let's program the buttons on the keypad by the entrance. So here to pull up my top button to set the light to 100%.
How does Lutron Grafik Eye work?
0:0010:55Lutron Grafik Eye Walk-through - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet it you've got four selections. And then an off level so you can have four presets. And an honorMoreSet it you've got four selections. And then an off level so you can have four presets. And an honor you can't have up to 16 if you have integrated systems.
Does Lutron ra2 work with HomeKit?
This model supports HomeKit. Lutron added additional functionality to the Smart Bridge in rev 2 hardware in order to support HomeKit. Otherwise you will need to purchase a Lutron Connect Bridge version 2 (CONNECT-BDG2), then follow the steps to upgrade within the Lutron app.
What is the range of the Lutron Smart Bridge?
30 feetThe RF range of the Caseta Bridge is 30 feet in all directions (Up, Down, Left, Right). In some homes there are devices that will extend beyond this range where in there will be a need for a Caseta Repeater or the use of a Caseta Plug in Lamp dimmer as a range extender.
How does Lutron Smart Bridge work?
The Smart Bridge is connected directly to your home network router via ethernet cable. The Bridge communicates wirelessly to Lutron Caséta Clear Connect devices. This allows you to monitor and control your lights from anywhere in the world via the Lutron App on an internet connected smart device.
How do I connect my Lutron bridge to a new Wi-Fi?
Make sure your Smart Bridge is connected to the new router. ... Connect the ethernet cable from the bridge directly to a LAN port on the new router.Re-set your router by cycling power off for 10 seconds and then turn it back on. ... Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.
How do you put a Lutron switch in pairing mode?
Press and hold the "Off" button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.
How do I connect my Lutron Smart switch?
0:272:46How To Connect Lutron Dimmer Switch To Lutron Connect BridgeYouTubeStart of suggested clipEnd of suggested clipSo now i'm just going to hold the bottom button on the lutron cassette dimmer for 10 seconds toMoreSo now i'm just going to hold the bottom button on the lutron cassette dimmer for 10 seconds to connect it to the lutron cassette smart bridge.
How do you set up a Lutron system?
1:428:05Lutron Caseta Setup and Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the hub is connected to your app all you got to do is create a home and start connecting yourMoreOnce the hub is connected to your app all you got to do is create a home and start connecting your accessories connecting lutron accessories is really easy here we've got an in-wall dimmer switch.
How do I connect my Lutron dimmer?
0:000:23How to pair Lutron Caseta Dimmer with Pico Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right super quick video to pair your remote. To your Lutron in wall wireless dimmer all you doMoreAll right super quick video to pair your remote. To your Lutron in wall wireless dimmer all you do is hold the bottom button for six seconds. And these lights will all start blinking.
1puttpro
Is it possible to remote access into the client's network to program a Lutron RadioRA2 main repeater? If so, is there a document or video that explains how to get my laptop on the client's network? To save "truck rolls"... having the ability to get my client's networks to program Lutron and RTi, would beneficial... VPN?
1puttpro
Thanks... this is a very useful tool for our business. Can this approach be used for connecting to other processors, like RTi? Do you know what port RTi uses?
Giancarlo
Thanks... this is a very useful tool for our business. Can this approach be used for connecting to other processors, like RTi? Do you know what port RTi uses?
What is the Lutron hotline?
Lutron remains committed to providing you with world class quality and service. Contact us at our 24/7 hotline (800.523.9466). * Design and programming software is available only to qualified installers and is required for initial setup of this application. Contact your Lutron dealer for more information.
How to switch lights in and off?
Software usually works but to switch lights in and off, you have to burrow to the system, then a room, then pick lights. Long way to go. If you want to switch another light on or off, back up to the rooms, then down to lights in that room. You can pick favorites, but I don’t see how that short cuts anything.
Does Lutron have a home control app?
In accordance with Lutron’s continued commitment to innovation, integration and security, Lutron is discontinuing the Home Control+ app and replacing it with the Lutron Connect app. The Lut ron Connect app provides remote access without a yearly subscription fee and offers enhanced integrations with services like Amazon Alexa, Google Home and Sonos.
Does Lutron Connect require hardware?
Thanks for reaching out to us. We do have a newer app called ‘Lutron Connect’ that addresses your concerns. However, it requires a new piece of hardware to be added to your system. If you are interested in learning more about Lutron Connect, please contact your system installer. If you do not know who your installer is, please contact us at customersatisfaction@lutron.com to assist in finding a certified installer.