How to connect to the Lutron connect Bridge (radiora 2)?
5.0 Connecting to the Lutron Connect Bridge (RadioRA 2) Requirements 1. Windows machine running the RadioRA 2 programming software 2. Main Repeater(s) 3. Lutron Connect Bridge (max of 1 per system) 4. Wired/Wi-Fi Router or Network switch to place the Connect Bridge onto the same network as the Main Repeater(s) 5.
What is Ethernet used for in radiora 2?
Ethernet: Used for third-party integration, Connect Bridge access, and database uploads from the RadioRA 2 programming software Figure 1: PC to two Main Repeaters: Ethernet or Wi-Fi (Never Ethernet and Wi-Fi at the same time)
What are the components of the radiora 2 controller?
Main Repeater– This is the basic RadioRA 2 controller and will be the main RadioRA 2 component connected to any network. Each RadioRA 2 Main Repeater has one RJ45 female connector for the RadioRA 2 LAN/VLAN. HWQS– Abbreviation of HomeWorks QS.
What ports does the radiora 2 have?
RS-232: Serial communication port used for some third-party integration 4. Ethernet: Used for third-party integration, Connect Bridge access, and database uploads from the RadioRA 2 programming software Figure 1: PC to two Main Repeaters: Ethernet or Wi-Fi (Never Ethernet and Wi-Fi at the same time) 4.0 Connecting to the RadioRA 2 Main Repeater
Does the Lutron app work remotely?
You can now use the app to control your Lutron lights, shades, temperature, etc. from inside or outside the house.
Do I need a Lutron Connect bridge?
A bridge is required if you wish to monitor or operate your Caséta products via a smart device or to integrate your system with other connected products such as smart speakers and thermostats. It is also required to create scenes or utilize timeclock scheduling of daily events.
How do I program my Lutron RadioRA 2?
To set up a RadioRA® 2 system, components must be added to the Main Repeater. First, add Auxiliary Repeater(s)*; then add all other system devices. Press and hold the Add button on the Main Repeater for 3 seconds until the green Add LED begins to rapid-flash (ten times per second) and the Repeater beeps.
How do I connect my Lutron to my phone?
Tap on the Lutron Connect app in the search results. Tap on the Install button and then choose to Accept the access request. The Lutron Connect app will then begin to download onto the device. Make sure that the mobile device is connected to the local Wi-Fi network that the Lutron Connect Bridge resides on.
What does a Lutron Connect Bridge do?
The Lutron Connect Bridge creates a link between RadioRA 2 and the cloud, enabling control, integration and monitoring of a RadioRA 2 system from a smartphone or tablet using the Lutron Connect app.
What is the difference between Caseta and Caseta pro?
Lutron Caseta has two hubs - the regular retail one simply called “Caseta” and the more advanced “Caseta Pro” which is not sold at retail. The Pro version is a superset - for slightly higher cost, you get all the standard Caseta capability (Lutron app, HomeKit/Siri, Alexa, Google Home Assistant).
How do I reset my Lutron Radiora 2 switch?
Step 1: Quickly triple tap and hold the Test or Light button on the Sensor. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the dome LED begins to flash slowly (approximately once per second). The Sensor has now been returned to Factory Default Settings.
How do I use ra2?
0:467:15Lutron RA2 Select Tutorial // How to Setup Scenes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's just dive into it to illustrate all the programming steps I've set up a small row to selectMoreSo let's just dive into it to illustrate all the programming steps I've set up a small row to select demo. I have a right to select main repeater. Already running and the Lutron right to select app.
How do you program a Lutron?
7:469:06Lutron RA2 Select Programming- Complete Guide How to Setup ...YouTubeStart of suggested clipEnd of suggested clipIt's a scene setting one it's going you back in focus a little bit press and hold press. And holdMoreIt's a scene setting one it's going you back in focus a little bit press and hold press. And hold start flashing boom done so we have that to the living room. Next.
What apps work with Lutron?
Voice ControlAmazon Alexa. Alexa will get the lights for you. ... Apple HomeKit. The Smart Bridge contains Apple HomeKit technology, so you can use Siri® to control your lights, shades, and more!Google Assistant. ... Apple Watch.
How do I find my Lutron IP address?
The Lutron App will walk you through the initial system setup and adding devices. The integration report and IP address settings are found in the Settings ->Advanced menu of the app. Tap the icon in upper left corner to access the Settings menu. Reference instructions for more details.
How do I connect my Lutron to my network?
Connect the bridge to the router Using an ethernet cable connect your Lutron Smart Bridge to an open LAN port on your router. If you do not have an open port, you can add additional ethernet connections by purchasing an unmanaged ethernet switch and plugging that into your router.
How many Lutron bridges do I need?
The app can only connect to one bridge at a time. To switch between systems with the app, you would need to log out of one system, and then log into the other system. While the Lutron app can only connect to one Bridge at a time, any HomeKit app can connect to any amount of Bridges simultaneously.
How do I connect my Lutron bridge to Wi-Fi?
Caséta SupportDetermine where to install your Smart Bridge. ... Connect the bridge to the router. ... Bridge Initialization. ... Verify the Wi-Fi Connection on all of your connected Smart Devices. ... Download the Lutron App from the App Store. ... Bridge Discovery & Pairing. ... Final Set-up.
How do you connect a Lutron switch to a bridge?
0:272:46How To Connect Lutron Dimmer Switch To Lutron Connect BridgeYouTubeStart of suggested clipEnd of suggested clipSo now i'm just going to hold the bottom button on the lutron cassette dimmer for 10 seconds toMoreSo now i'm just going to hold the bottom button on the lutron cassette dimmer for 10 seconds to connect it to the lutron cassette smart bridge.
How do I connect my Lutron system?
Make sure your Smart Bridge is connected to the new router. ... Connect the ethernet cable from the bridge directly to a LAN port on the new router.Re-set your router by cycling power off for 10 seconds and then turn it back on. ... Re-set your Smart Bridge by cycling power off for 10 seconds and then turn it back on.
Flexible, Scalable, Reliable
Choose from a variety of wireless components to customize and expand your system from a single room to your whole home. Seamlessly integrate with the full line of Lutron wireless shades and drapes, as well as occupancy / vacancy sensors and Lutron thermostats, for total home control.
Safety & Comfort: Inside and Out
Conveniently turn on your lights from the comfort of your car as you approach your home. Create a path of light from your entryway through your kitchen, so you’ll never walk into a dark house again.
Technology
Lutron's patented Clear Connect RF technology sets the bar for reliability. You can trust your system will work with precision and accuracy every time you use it.
What is a Lutron bridge?
The Lutron Connect Bridge creates a link between RadioRA 2 and the cloud, enabling control, integration and monitoring of a RadioRA 2 system from a smartphone or tablet using the Lutron Connect app .
How to control multiple lights, shades, audio, and temperature?
Add personalized scenes to control multiple lights, shades, audio, and temperature together with the touch of a button. Create a “relax” scene that dims lights, lowers shades, raises the temperature, and plays your favorite tunes as you unwind for the day. Or create a “Goodnight” scene that turns off all lights, lowers shades, and sets back the temperature before you drift off to sleep.
What is CasaTunes?
CasaTunes is a whole house audio system providing endless amounts of music including disc, networked and Internet music. The system is controlled using the CasaTunes Android and iOS apps or via integration with a Lutron system through button presses and timeclock events.
Does Alexa get the lights?
Alexa will get the lights for you. Just say the word.
Does Honeywell Total Connect thermostat work with Wi-Fi?
Choose from a wide variety of thermostat options to control the temperature in your home, from anywhere. Compatible with all Honeywell Total Connect Comfort Wi-Fi thermostats.
Remote Access RadioRa2 Issue
I recently installed a RadioRa2 project for a client. To demo the remote access feature I downloaded the app under my iTunes Account and setup the system. When I tried to set it up for the client I received a message that this system is already registered to an account.
Thank you for the Awesome Support!!!!!!
Can you please send the project file for this system to systemsupport@Lutron.com so that we can confirm the serial number of the processor in this system?
Home Control App and Alarm.com
Thanks for the quick follow up. I sent the file as requested with the previous case number. I mentioned "Per Craig's Request" so the know who asked for it.
What is Lutron Designer?
Lutron Designer– Client UI for setup and programming of the HomeWorks system. Primary software for all HomeWorks software versions.
Why is it important to troubleshoot a Lutron?
This can be useful as the removal of all potential network issues causing components between the Windows computer and Lutron processor. This helps to narrow down the troubleshooting and get closer to a root cause by minimizing the scope of the network.
How many repeaters can RadioRA 2 use?
Using two Main Repeaters in RadioRA 2 allows for systems that can scale as large as 200 devices. The inclusive software is required for commissioning a two Main Repeater system.
How much latency does a Lutron need?
Note that for managed networks, the maximum latency between any two Lutron processors should be less than 10 ms. The maximum latency between the Lutron commissioning machine and any processor needs to less than 10 ms.
What is a Unicast?
Unicast– A communication method over Ethernet TCP or point-to-point communication.
Is TCP/23 required for Lutron?
Source TCP/ 23 • Only required if the Lutron system is integrating with third-party equipment through Serial/IP • Prior to version 13.0, default Telnet credentials were available for integrators to use. From 13.0 forward, Telnet credentials need to be set up in the Lutron commissioning software
Can you run Lutron on Mac?
In order to run the programming software on Mac hardware, Windows must be utilized either as a virtual machine (ex. Parallels or Fusion) or by booting the Mac up using only the Windows software (Bootcamp). Bootcamp setup is the same as setting up a Windows machine to connect to a Lutron processor. As a result of increased complexity, the following focuses on using virtual machine connections.
