By default, Hikvision uses: o HTTP Port: 80 o Device Port: 8000 • Enabling Ports to be forwarded to a device on your local network will give users remote access to the device from the internet.
Full Answer
How do I view my Hikvision cameras from a Mac?
In order to view your HikVision cameras from a Mac, you will need to install the IVMS-4200 software first. This article will walk you through the necessary steps. 1. In your web browser, visit : https://us.hikvision.com/en/support-resources/downloads/client-software
How do I remotely access my Hikvision device?
Introduction The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN.
Can I install standard firmware on the Hangzhou Hikvision digital model?
© Hangzhou Hikvision Digital Technology Co., Ltd. All Rights Reserved. Privacy Policy Web Developmentby 8P-Design IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system.
See more
How do I access Hikvision camera on my browser remotely?
Enable remote HTTP access, so that the router can be reached from a remote location. Specify an Access Point Name (APN) for the SIM card in use, so that the router will obtain a Public IP address. Configure a Port Forwarding rule that redirects all connections from one Port to the camera's IP address:Port.
Can I use HIK-connect on my Mac?
Hangzhou Hikvision Digital Technology Co., Ltd. Requires iPadOS 10.0 or later. Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
Can Hikvision cameras be activated via web browser?
Use web browser to activate the camera. For the camera with the DHCP enabled by default, use SADP software or PC client to activate the camera. Make sure your camera and your PC connect to the same LAN.
Can I connect hikvision by WiFi?
1 Answer. Most Hikvision (and other brands) CCTV recorders (DVR's and NVR's) don't have built-in WiFi for connecting to a network. Connecting to WiFi is easy however using a device called a client bridge.
How do I watch Hikvision in Safari?
How to access a Hikvision device on Safari?Install the Hikvision web plugin for Mac. Download it from the Hikvision website or from this google drive link.Open up the Safari browser. Type your NVR's IP address into the address bar. ... You should be able to see the live view of your cameras and the rest of the settings.
How do I watch CCTV on my Mac?
0:001:56Mac DVR Viewer Software for CCTV Security Cameras - YouTubeYouTubeStart of suggested clipEnd of suggested clipI. Start by opening the software on my Mac laptop. I select DVR new connection from the menu. TheMoreI. Start by opening the software on my Mac laptop. I select DVR new connection from the menu. The login menu is displayed users need to enter the IP address or host name used to access their idvr.
How do I view Hikvision in Chrome?
To view your device using the Chrome browser, you must add the IE tab extension to Google Chrome. The IE tab emulates the IE rendering engine which allows the use of Java, Silver Light, and Active X controls that work with Hikvision devices.
How do I access my Hikvision IP camera online?
Open up an Internet browser and type in the IP address of the NVR. Log in using username and password of the recorder. Go to Configuration > Network > Advanced Settings > Other. Go to Configuration > System > Camera Management > Click on the blue link next to the camera you wish to log into.
How do I enable Hik-Connect on my browser?
You can enable Hik-Connect service for a device on the device web page.Visit the device IP address on the web browser.Enter the device user name and device password to log in to the device web page.Tap Configuration > Network > Advanced Settings > Platform Access to enter the Platform Access page. ... Check Enable.More items...
How can I connect Hikvision DVR to laptop online?
Enabling Hik-Connect Service on WebOpen the web browser on your PC.Input the device IP address and press the Enter key on your keyboard.Input the device user name and the device password to login.Tap Configuration – Network – Advanced Settings – Platform Access to enter the Platform Access page.Check Enable.More items...
Can we connect DVR with WIFI?
Typically, the DVR must be hard-wired using a LAN internet cable, but Netgear produces an adapter that can allow your DVR to communicate wirelessly with your router.
What is HIK-Connect server address?
To do this we will navigate using the web-based GUI to Configuration >> Network >> Advanced Settings >> Platform Access and ensure that it is enabled and the “Platform Access Mode” is set to Hik-Connect, we will then ensure that the “Server Address” is 'dev.eu.hik-connect.com' and press “Save”.
How can I access Hikvision camera in Firefox?
How to access a Hikvision device on Firefox?Download and install the Firefox ESR version.Type your NVR's IP address into the address bar. ... Install the ActiveX plugin when prompted.Re-enter the username and password.
How do I view Hikvision camera in Microsoft edge?
2:117:23How to View Hikvision Cameras Using Microsoft Edge Browser in Legacy ...YouTubeStart of suggested clipEnd of suggested clipOkay once you do that you'll be brought to the login screen for that device. Okay so i'm going toMoreOkay once you do that you'll be brought to the login screen for that device. Okay so i'm going to enter my credentials. And what happens in edge we're in microsoft edge using windows 11.
Can I view my HIK connect on PC?
Hik-Connect for PC. You can use Hik-Connect on your PC through this Add-on.. Want to secure your home, workplace, and office more. Place the CCTV cameras in a different direction and leave the rest of the work at Hik Connect.
What is the default IP for Hikvision camera?
In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345.
Where is the ipconfig command?
b) Windows NT, 2000, and XP users: Locate the Windows icon in the bottom left corner of the task bar. Click Run. Type cmdor commandand press enter. Following the available prompt, type ipconfigand press Enter.
How to check IP address availability?
a)You can check the IP address availability by performing the “Ping” command (Fig. 2). In order to do that you need to type ping 192.168.1.4 at the command promptwindow.
Can you enable DHCP in DVR?
a) You can enable the DHCP checkbox in the DVR Network Configuration interface:
Can I remotely access my Hikvision device?
The following guide will guide you through the necessary steps to remotely access your Hikvision device with another PC, Laptop, Tablet, Smartphone or iPhone. Before proceed please connect your device to your router and obtain a computer that is already connected to the same router or LAN. Also make sure that your computer can access the internet. After properly port-forwarding (also called port-mapping) your router you will be able to access your device by using an internet browser, such us IE, Chrome, Firefox or Safari and/or our client software iVMS4200.
Hik-Connect for Small Business Surveillance
Get easy access to devices with Hik-Connect – powered by P2P technology – and forget outdated and complicated network configuration.
Hik-Connect for Residence Surveillance
When you are at work or on vacation and a visitor rings the doorbell, you will receive a message on your smartphone. You can then have the power to talk with your visitor remotely through Hik-Connect, adding a very powerful level of security to your home.
