Remote-access Guide

magicmirror enable remote access

by Ona Cummerata Published 2 years ago Updated 2 years ago
image

Reboot your Pi, you can do so by using: sudo reboot This is the basic setup completed. You should now have a remotely accessible Pi which automatically boots into Magic Mirror displaying the default modules and doesn’t sleep.

Full Answer

How do I set up the magicmirror remote control?

(1) Clone this repository in your modules folder, and install dependencies: (2) Add the module to your config/config.js file, if you add a position, it will display the URL to the remote on the mirror. (3) For security reasons, the MagicMirror (and therefore the Remote Control) is not reachable externally.

How do I enable HTTPS on magic mirror?

You can enable HTTPS if you want, but you’ll need a certificate, that’s not necessary if it’s just to see your changes in real-time. Restart the Magic Mirror app, and check that you can access it from your computer, by opening the URL http://<IP>:8080 in your browser.

How do I install magic mirror² using the automatic installer?

If you followed the default installation instructions for the Magic Mirror² project, you should be able to use the automatic installer. The following command will download the installer and execute it: (1) Clone this repository in your modules folder, and install dependencies:

Where can I find the magic mirror configuration?

The Magic Mirror configuration is the one you created during the installation. The file location is probably something like: “/home/pi/MagicMirror/config/config.js”. Open it with your favorite editor ( nano for example ), and take a look at the file content.

How to create custom menus in Mirror?

Can you add multiple devices to an IP range?

About this website

image

MMM-Remote-Control | MagicMirror Forum

Hello, I have a problem with the remote control of the MM. I have it up and running, but I can’t edit the view in the browser on any device. Any help? > magicmirror@2.7.1 start /home/pi/MagicMirror > sh run-start.sh Starting MagicMirror: v2.7.1 Loading c...

10 Magic Mirror Modules You Have to Check Out

There are a lot of 3rd party modules available for the MagicMirror platform that runs on the Raspberry Pi.The platform has hundreds of users that have contributed many great modules that you can add easily to your Magic Mirror. Here are 10 handpicked MagicMirror modules that can make your life easier or just look cool on your wall.

Config Error! · Issue #123 · Jopyth/MMM-Remote-Control · GitHub

modules: [ { module: 'MMM-Remote-Control' // uncomment the following line to show the URL of the remote control on the mirror position: "bottom_right" // you can hide this module afterwards from the remote control itself config: { //customCommand: {}, // Optional, See "Using Custom Commands" below //customMenu: "custom_menu.json", // Optional, See "Custom Menu Items" below //showModuleApiMenu ...

GitHub - edward-shen/MMM-pages: Add pages to your MagicMirror²!

Notification Payload type Description; PAGE_CHANGED: int: MMM-pages will switch to the provided page index. PAGE_INCREMENT: int, Optional: MMM-pages will increment the page, or by n times if a number is provided. Not providing a number is equivalent to sending a payload of 1.If there are no more pages to increment by, this will loop around to the first page.

Installation & Usage | MagicMirror² Documentation

#Installation & Usage. The Magic Mirror can be installed manually or using automatic installers. At the start of 2020 the decision was made to remove the automatic installer from the MagicMirror² core repository and move it to a community maintained separate repository.

How to create custom menus in Mirror?

The file may be called whatever you want, but the name must be provided in the config section, and it must be stored in the Mirror's config/ directory (same place as your config.js file).

Can you add multiple devices to an IP range?

You can also add multiple devices in an IP range (e.g. all devices with 192.168.0.X ):

Voted number 1 in the MagPi Top 50!

MagicMirror² is the winner in the official Raspberry Pi magazine’s 50th issue celebration feature voted by the Raspberry Pi community.

Easy to install!

Want to install MagicMirror² on your freshly installed Raspbery Pi? Check out the installation instructions on our docs site: docs.magicmirror.builders

Enjoying MagicMirror? Consider a donation!

MagicMirror² is opensource and free. That doesn't mean we don't need any money.

How to start Magic Mirror on Pi?

Press ctrl+x, save the file and reboot your Pi. If all went well, Magic Mirror should start up after about 1-2 minutes. If it doesn’t allow you to save, try opening the file again without the “sudo” command.

How to install Raspbian on Pi?

1. Installing Raspbian Jessie 1 Download Etcher and install it to your computer. It’s available for both Windows or OSX 2 Connect an SD card reader with your SD card inside. 3 Grab Raspbian Jessie from here. This is the operating system for your Pi 4 Open Etcher and select the Raspbian Stretch image you downloaded. 5 Select the SD card you wish to write your image to. 6 Review your selections and click ‘Flash!’ to begin writing data to the SD card.

How to get a Raspberry Pi desktop screen?

Boot up your Raspberry Pi. Unmount the SD card from your PC and insert it into your Pi. You’ll need to connect the Pi to power and to a monitor, as well as hooking up a mouse and keyboard. After booting up, you will see the Raspbian desktop screen. 3.

Can you use Magic Mirror on Raspberry Pi?

Setting up a Raspberry Pi to run a Magic Mirror on can be a bit daunting if you haven’t used a raspberry pi or a linux computer before. But it isn’t as hard as it seems, and by following this handy setup guide, you can be up and running in no time.

How to allow remote access to PC?

The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was added in the Windows 10 Fall Creators update (1709), a separate downloadable app is also available that provides similar functionality for earlier versions of Windows. You can also use the legacy way of enabling Remote Desktop, however this method provides less functionality and validation.

How to remotely connect to Windows 10?

Windows 10 Fall Creator Update (1709) or later 1 On the device you want to connect to, select Start and then click the Settings icon on the left. 2 Select the System group followed by the Remote Desktop item. 3 Use the slider to enable Remote Desktop. 4 It is also recommended to keep the PC awake and discoverable to facilitate connections. Click Show settings to enable. 5 As needed, add users who can connect remotely by clicking Select users that can remotely access this PC .#N#Members of the Administrators group automatically have access. 6 Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.

How to connect to a remote computer?

To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.

Should I enable Remote Desktop?

If you only want to access your PC when you are physically using it, you don't need to enable Remote Desktop. Enabling Remote Desktop opens a port on your PC that is visible to your local network. You should only enable Remote Desktop in trusted networks, such as your home. You also don't want to enable Remote Desktop on any PC where access is tightly controlled.

How to create custom menus in Mirror?

The file may be called whatever you want, but the name must be provided in the config section, and it must be stored in the Mirror's config/ directory (same place as your config.js file).

Can you add multiple devices to an IP range?

You can also add multiple devices in an IP range (e.g. all devices with 192.168.0.X ):

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9