Can a magnetic lock be mounted anywhere?
Can be mounted anywhere, at any angle. The DKML (DoorKing Magnetic Lock) series of magnetic locks offer a wide range of high quality electro-magnetic locks (1200, 600 and 300 Lb locks) and brackets to accommodate almost any access control door locking requirement.
Are magnetic door locks good for home security?
From a typical deadbolt lock, door locks turned into highly sophisticated ones such as magnetic door locks for home. However, choosing the best electromagnetic door locks may be challenging. In determining the right door locks for home security, there are features that you have to take into consideration.
What are the dimensions of a magnetic door lock?
These magnetic door locks are designed for indoor use only. 1200 Lb holding force magnetic lock; single or dual doors. Surface mount only. Built-in electrical enclosure. 12 or 24 Volt DC operation. Quick release "pop" button on armature. Single doors: 2.875"H x 10.5"W x 1.5"D.
What is remotelock?
RemoteLock gives you both wifi connected and no-internet lock control. With scheduled, identity-based access and a complete reporting solution RemoteLock is the complete way to manage your business, home or rental properties.
Can you open a locked door with a magnet?
A magnet cannot entirely unlock a deadbolt. There are some factors to be considered. It'll depend on the types of deadbolt lock, the door and doorframe, and how you turn your lock. Magnets work with friction.
Are magnetic locks secure?
Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.
What happens to a magnetic lock when the power goes out?
If power is lost, then the door will become unlocked. (Typically Mag Locks) “Fail-Secure” requires power to unlock the door. If power is lost, then the door will remain locked.
Can magnetic locks fail secure?
Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage.
How much does it cost to install magnetic door lock?
Maglocks are easy to install and relatively inexpensive. They cost between $350-750 for the hardware and $500-$800 for labour.
How much power does a magnetic lock use?
The power for an electromagnet lock is DC (direct current), around 5–6 W. The current is around 0.5 A when the voltage supply is 12 VDC and 0.25 A when using 24 VDC (varies between manufacturers and if there are one or two coils in the block).
What happens to access control when electricity fails?
Fail-safe: in the event of a loss of power supply, the lock will automatically unlock, ensuring that people can still exit through the door (safety first) Fail-secure: in the event of a loss of power supply, the lock will automatically lock, meaning people are unable to enter (or exit) through the door (security first)
Do key fobs work when the power is out?
Myth #1: Keyless locks will fail during power outages. Keyless locks operate on battery power, which means that even if you experience a power failure in your home or business, your keyless lock will still function as normal.
How long do Maglocks last?
5. Durability. Mechanical locks are subject to a lot of wear and tear over time, and many are prone to breakage. Maglock can be expected to last the lifetime of the door.
What style of lock is always fail-safe?
A fail-safe electromechanical lockset is locked when power is applied. When power is removed, the lever can be turned to retract the latch. Fail-safe electromechanical locks are used for stairwell doors providing re-entry. The lock is constantly powered so the lever on the stair side is locked.
How do you install a magnetic door lock access control system?
1:083:55How to install Electro Magnetic Door Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin with the thinner metal piece which will be attached to the door. Before we screw this intoMoreBegin with the thinner metal piece which will be attached to the door. Before we screw this into position we will need to mark off the correct location. Using the ruler and pencil.
How does a fail secure magnetic lock work?
Most fail secure locks use a technology known as electric latch retraction (EL), which basically means that power is required to retract the latch and unlock the door. The latch stays in a retracted position as long as power is applied, but as soon as power is cut off, the latch projects out again, locking the door.
How do you demagnetize a magnetic door lock?
1:544:39FIREFIGHTER TRAINING : MAGNETIC LOCK - YouTubeYouTubeStart of suggested clipEnd of suggested clipBetween the frame and strike plate now push down in a vertical or tilting the ads ninety degrees.MoreBetween the frame and strike plate now push down in a vertical or tilting the ads ninety degrees. And break the magnetic bond. You can also use the plate of an axe.
Are electric strikes secure?
Benefits of Electric strikes Security: Electric strikes are a very secure and safe option for latching a door since they can only be activated with a card, pin or remote device that is associated with the strike.
What is a fail secure lock?
A fail secure electromechanical lockset is locked on the secure side when there is no power to the lock. To unlock it, power is applied and the lever can then be turned to retract the latch. The latch remains projected until the lever is turned.
How are magnetic locks used?
Magnetic door locks use an electromagnetic force to stop doors from opening, so they are ideal for security. Mag locks, such as the Deedlock mag locks are made up of an electromagnet and an armature plate. The plate is attached to the door, and the magnetic to the door frame.
What is a DKML lock?
The DKS series of Door (DKML) Locks offers a wide range of high-quality electro-magnetic Locks and Brackets to accommodate most access control locking requirements.# N#Door Locks can be ordered in surface or mortise mount styles, with special options such as LED Lock Status Indicators and a built-in timer for automatic lock reactivation after a preset time.
Can magnetic door locks be used indoors?
These magnetic door locks are rated for indoor use only.
Do magnetic locks break?
Magnetic locks have no moving parts to wear out or break and are virtually indestructible. Most locks are available in both surface and flush mount designs and can be ordered with special options such as LED lock status indicators, signal relays and built-in timers for automatic re-lock after a preset time period.
Special offers and product promotions
Amazon Business : Discover discounts and FREE shipping on work supplies. Register a free business account
Have a question?
There was a problem completing your request. Please try your search again later.
Product Description
The main feature of this kit is that it allows you to open the door simply by pressing the wireless RF remote instead of moving to the door physically when someone visits. The remote communicates with the receiver, which can program up to 40 transmitter, and it has a range of 160 feet.
What is a 1200 lb lock?
Magnetic locks have no moving parts to wear out or break and are virtually indestructible. 1200 Lb locks are typically used for vehicular gate applications while the 600 Lb lock is used for pedestrian gate applications.
What is a DKGL lock?
The DKS series of Gate (DKGL) Locks offers a wide range of high-quality electro-magnetic Locks and Brackets to accommodate most access control locking requirements.
What is a FUGEST lock?
Another lock to secure homes, FUGEST Electric Magnetic Lock is a fail-safe device that unlocks when there is no power to prevent the owner of the house from being trapped in case of emergencies, such as fire or any natural disaster.
What is a fail safe lock?
A fail-safe lock automatically unlocks in case there is a power outage and keeps people from being trapped. A fail-secure lock, on the other hand, will remain locked despite the absence of electricity.
What is the FPC-5192?
With a 600 lbs holding force, the Visionis FPC-5192 Indoor Electromagnetic Lock prevents any incident of forced entry . I don’t have to stay awake in the middle of the night even with the slightest noise because I have assurance that no burglar can enter my home.
How much force does the fugest lock have?
Designed for access control single door, the Fugest Electromagnetic Lock also comes with a 600 lbs holding force. I’ve tried its holding force by pushing the door, and amazingly it held like cement.
Why is a lock so useful?
Having this lock is really useful because of its durability and safety features. However, the installation requires effort since the lock will not work if it is not installed properly.
How much force does a lock hold?
In terms of holding force, the lock is capable of holding up to 280 kg. It is also one of the best door locks for rental property because it can keep homes secure from burglary.
How strong is a MENGQI lock?
Aside from being a fail-safe lock, MENGQI-CONTROL Single Door Electric Magnetic Lock has a strong holding force that reaches up to 600 lbs. It can be used for commercial and public buildings because of its reliability.
Secure Every Door
Secure one door or hundreds, and manage access from anywhere. RemoteLock supports both hardwired and smart-lock solutions, from main entries to parking garages to residential doors.
Every lock. Every credential
Choose from a wide selection of Wi-Fi and Z-Wave smart locks, as well as wired access control systems. Use the credentials you prefer, including PINs, prox cards, mobile access and more.
Manage any type of access
Gain complete visibility of who has access to your property — when and where. Send and revoke self-expiring access codes for improved security and greater efficiency.
Track it all from one platform
Our centralized platform is easy-to-use and available whenever and wherever you need it, so you can take control of your property from your smartphone or laptop.
