How to reboot Synology?
Soft reset your Synology Router
- Use a paper clip to gently press and hold the RESET button for 4 seconds. ...
- When the soft reset is complete, launch a web browser on a computer that is being connected to your Synology Router via Ethernet.
- Enter "router.synology.com" in the address bar.
- Click Connect to launch the configuration wizard.
How to find my Synology?
Where is Synology NAS on network Mac?
- Open Finder on your Mac computer.
- Find the menu bar along the top of the screen.
- Click Go and select Connect to Server.
- Enter your DSM username and password.
- Finally, if your user name credentials are correct, you will now see your Synology NAS listed under the Shared section of your Finder window.
How to remotely access your Synology NAS using QuickConnect?
What methods are available to remotely access my Synology NAS?
- Creating a customized ID or address with QuickConnect.
- Setting up a hostname for the IP address of your NAS using DDNS.
- Mapping a port on your router to the IP address of your NAS using port forwarding.
How to connect Synology NAS directly to PC without router?
- Put the Mellanox cards in your PC and Synology. Make sure all drivers etc are installed.
- Connect to the Synology. ...
- On the PC- open up the network interface properties for your 10gig card. ...
- Now plug the 10gig line between the Synology and the PC. ...
- With both of these set, now connect to \192.168.50.50 (or whatever IP you set in Step 2). ...
See more
How do I map a Synology NAS remotely?
Using CyberduckDownload, install, and launch Cyberduck.Click Open Connection.Select WebDAV (HTTPS) from the drop-down menu.Enter the following information: Server: Enter the IP address or the hostname of your Synology NAS. ... Click Connect. Now you should see the shared folders on your Synology NAS appear in Cyberduck.
How do I map a network drive accessible over the internet?
2.1 For WindowsDownload, install, and open NetDrive.Click the Connect button next to WebDAV.Enter the following information: Type: Choose WebDAV from the drop-down list. ... Click Save to save the settings.Click Connect.Now you should be able to see the shared folders on your Synology NAS in Windows Explorer.
How do I map my Synology?
Synology AssistantClick on This Computer.Click on your Synology NAS.Click on Map Drive.Enter your NAS credentials.Select the Shared folder to map as a drive.Select an available drive letter. Tip: Check the "Reconnect at login" box to have the drive automatically mounted at boot.Click on Finish.
How do I access my NAS from a different network?
You cannot access NAS when you in different network workaround. You need to set a VPN server on your home machine, then in your office, use VPN to remove logon to your home pc then access NAS.
How do I connect to Synology NAS from outside?
DSM 7.0 and above: Go to Control Panel > External Access > QuickConnect. DSM 6.2 and below: Go to Control Panel > QuickConnect....Via a mobile device:Open a Synology mobile app, such as DS file.Enter your QuickConnect ID, plus your DSM account and password.Click Login.
How do I map Synology NAS on Windows?
Map with Windows ExplorerOpen a Windows Explorer window and go to Computer.Click Map network drive. ... On the Map Network Drive window, choose a drive letter from the Drive drop-down menu.In the Folder field, enter the server name of your Synology NAS and shared folder name preceded and separated by backslashes.More items...
Why can't I access my Synology NAS remotely?
For Synology NAS. Check if QuickConnect is enabled. For DSM 6.2: Go to Control Panel > QuickConnect and ensure the Enable QuickConnect checkbox is ticked. Afterward, confirm the services you wish to access via QuickConnect are enabled at the Advanced tab.
How can I access my home server from anywhere?
When you're away from home, you can just point a browser to myhome.homefpt.net:8080 to access your router's Web interface and manage your home network remotely. This works with almost all home routers, except for those from Apple.
How do I share a network drive over the Internet?
Share a folder, drive, or printerRight-click the folder or drive you want to share.Click Properties. ... Click Share this folder.In the appropriate fields, type the name of the share (as it appears to other computers), the maximum number of simultaneous users, and any comments that should appear beside it.More items...•
How do I map a network drive with an IP address?
In this example, we used Windows 7.Right-click the Computer icon and click on the Map network drive…Enter the IP Address of the Network Attached Storage or the router with USB storage device and click the Browse…Double-click on the IP Address of your router.Select the name of your USB Storage device and click OK.More items...
How do I access a network drive?
Right click on the Computer icon on the desktop. From the drop down list, choose Map Network Drive. ... Open My Computer and click on the Tools menu option. From the drop down list, choose Map Network Drive. ... While in Finder open the Go menu and select Connect to Server... ( or press command+K)
How do I access a shared drive?
On your computer, go to drive.google.com. At the left, click Shared drives and click a shared drive you are a member of. At the top, click Manage members. Add names, email addresses, or a Google Group.
How to map Synology Drive?
To map the Synology drive, as a Network Drive using the Windows File Explorer: 1.Right-click on the This PC icon in explorer and choose Map Network Drive. 2. At Map Network Drive settings: a. Choose a Drive letter for the mapped sinology folder. b.
How to access Synology NAS?
How to Configure and Access Synology NAS with WebDAV over Internet. Step 1. Set up WebDav on Synology NAS device. Step 2. Assign a Static IP Address on Synology NAS. Step 3. Obtain a Free Domain Name using a DDNS Service. Step 4. Setup Port Forwarding on your Router.
What port is NAS shared file?
To be able to access your NAS shared files from outside of your local network, you need to forward the port "5006" (on your router) to the NAS IP address (e.g. "192.168.1.199"). To do that:
How to allow traffic on network ports?
In Control Panel > Security > Firewall > Edit Rules, make sure that your firewall rules allow traffic on network ports used by Windows file server (i.e., ports 137, 138, 139, and 445).
Does Windows XP support SMB1?
Windows XP only supports SMB 1. If Synology Assistant is installed on a Windows XP computer or any computer that only allows SMB1 connections, make sure that the Minimum SMB protocol is set to SMB1 on your Synology NAS. Refer to this article for more details.
How to access NAS on Windows 10?
The best NAS for home are fantastic for storing files, and the easiest way to access them on Windows 10 is to map a network drive within the OS. Instead of connecting to the NAS via a browser , a mapped drive can act much like a local SSD or HDD and allow for quick access.
How to replace NAS IP address with shared folder name?
Enter \SERVERSHARE into the folder field , replacing SERVER with the NAS IP address and SHARE with the shared folder name.
Can you map a network drive?
If you're using the Synology Assistant suite , it's possible to map a network drive using the official software, but it requires a similar number of steps and I recommend doing it through Windows Explorer.
Is Synology a 2 bay NAS?
The latest two-bay Intel-powered NAS from Synology is a cracking example of value. The newer Intel processor is more than capable of handling some transcoding (just not 4K), as well as other tasks you wish to run on the NAS.
What port does Synology use?
You will have to know the IP address of the Synology device. You can your network with a couple options in hopes of finding the Synology NAS. Advance IP Scanner. Once you know the IP, you will still need to know the port to access the Synology. Default port is 5000.
Can you bypass port forwarding on Synology router?
You can bypass port forwarding setup on your router if you proceed with Synology’s Quick Connect. Otherwise, consider what services you need open from the list above. We are steadily building a list of remotely accessible port forwarding setup instructions.
What is WebDAV on Synology?
WebDAV is an extension of HTTP designed to let users edit and manage files stored on remote servers. When WebDAV service is enabled, client programs that support WebDAV, such as certain Windows apps, Mac OS Finder, Linux File Browser, will be able to remotely access the Synology NAS just like accessing a local network drive.
Where is WebDAV in DSM 6.0?
While you have the port forwarded, go to Synology’s admin page and under Package Center search for “WebDAV”. In DSM 6.0 beta, Synology has moved WebDAV Server to its own app that doesn’t come out of the box anymore. If you are on DSM 5.2 or older, WebDAV will be Under Control Panel > File Services > (tab) WebDAV
What is the tool that lets you map WebDAV?
Download and install the tool called NetDrive, it lets you map WebDAV share natively on Windows. When you do make sure to restart your PC.
Does Synology support WebDAV?
Windows do support WebDAV however the type of WebDAV Synology allows you to connect to your personal device does not work if there is no SSL certificate. If you try to mount Synology’s share via the internet, you need to first make sure forward your external port to your local Synology NAS port. This is done usually at your local router’s admin page, each admin panel works differently, but you want to find the mapping where the external request will map to the correct port to your internal NAS server. By default, Synology uses 5005 for HTTP’s WebDAV and 5006 for HTTPS.
Can you enter URL for Synology NAS?
Here you can enter the URL of the Synology NAS as external IP. If you have a certificate installed it also lets you connect via HTTPS with SSL option. If not, enter