Remote-access Guide

mariadb remote access synology

by Bettye Auer Published 2 years ago Updated 2 years ago
image

If your MariaDB server is configured with the UFW firewall (which is by default on all Webdock servers) then you will need to allow traffic on port 3306 from the remote system. You can grant access to the remote system with IP 208.117.84.50 to connect the port 3306 with the following command: $ sudo ufw allow from 208.117.84.50 to any port 3306

Full Answer

How to configure MariaDB for remote client access?

Configuring MariaDB for Remote Client Access 1 Finding the Defaults File. To enable MariaDB to listen to remote connections, you need to edit your defaults file. ... 2 Editing the Defaults File. ... 3 Granting User Connections From Remote Hosts. ... 4 Port 3306 is Configured in Firewall. ...

What port does Synology use for MariaDB?

The Synology has MariaDB 10.0.30-0006 running and serving a Wordpress installation. From my PC, I run MySQL Workbench. I try to connect to diskstation port 3306 with the same user name and password that Wordpress is using.

What is MariaDB 10 and how to use it?

MariaDB 10 is a community-developed fork of MySQL and is one of the most widely used open-source relational database management system (RDBMS). It is highly compatible with MySQL and allows users to effortlessly migrate databases from MySQL to MariaDB 10. With MariaDB 10, you can easily and efficiently read, update and manage your data.

How do I grant permissions to a Synology user?

Enter Synology by ssh. SELECT User, Host FROM mysql.user WHERE Host <> 'localhost'; GRANT ALL PRIVILEGES ON *.* TO 'root'@'**192.168.1**.%' IDENTIFIED BY '**my-new-password**' WITH GRANT OPTION; This one worked wonders. Complementary information on grant : mariadb.com/kb/en/grant So I managed to get this working.

image

How do I connect to MariaDB on Synology NAS?

0:043:33Synology NAS Setup MariaDB 10 for PaperOffice Document ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd log into this database with paper office start synology's disk station manager first and thenMoreAnd log into this database with paper office start synology's disk station manager first and then open the package. Center all packages are listed. Now select maria db10.

How do I access my MariaDB database remotely?

How to enable Remote access to your MariaDB/MySQL database on Ubuntu Bionic or MariaDB < v10. 6Enabling Remote Access in the Webdock Dashboard. ... Manual configuration using the command line. ... Verify MariaDB Server. ... Configure MariaDB. ... Grant Access to a User from a Remote System. ... Configure Firewall.More items...•

How do I access my Synology NAS remotely?

OverviewGo to Control Panel > QuickConnect.Check the Enable QuickConnect box.If you do not have a Synology Account, click Log in to or register a Synology Account. ... Create your own QuickConnect ID in the QuickConnect ID field. ... If you do not see the QuickConnect DSM link, click Advanced and make sure DSM is enabled.More items...

How do I access MariaDB remotely from Windows?

WindowsOpen the command prompt by following this steps: Start -> run -> cmd -> press enter.Navigate to your MariaDb installation folder (Default: C:\Program Files\MariaDb\MariaDb Server 12\bin)Type in: mysql -u root -p.GRANT ALL PRIVILEGES ON *. ... Run this last command: FLUSH PRIVILEGES;To exit type: quit.

How do I grant access to a database in MariaDB?

Create a new database: MariaDB> create database DATABASE_NAME; Create a new user (only with local access) and grant privileges to this user on the new database: MariaDB> grant all privileges on DATABASE_NAME.

Is there a MariaDB workbench?

Overview. MySQL Workbench can connect to MariaDB SkySQL services, allowing you to run queries interactively: MySQL Workbench is a graphical database tool. MySQL Workbench is available for Linux, macOS, and Windows.

Why can't I access my Synology NAS remotely?

For Synology NAS. Check if QuickConnect is enabled. For DSM 6.2: Go to Control Panel > QuickConnect and ensure the Enable QuickConnect checkbox is ticked. Afterward, confirm the services you wish to access via QuickConnect are enabled at the Advanced tab.

How do I access files from Synology NAS outside the local network?

Enter the following information:Storage: Select Synology.Drive: Select a network drive letter from the drop-down menu.Address: Enter the IP address or the hostname of your Synology NAS.Port: Enter 5006 or the port that you specified for WebDAV on your Synology NAS.Account: Enter your DSM account and password.

Can you access Synology NAS from outside network?

Synology has a very easy feature called 'QuickConnect'. It allows you to easily access your NAS from outside your network. You can access your photos and documents anytime, anywhere in the world. Once you've followed this step-by-step plan, all you need is a working internet connection.

Are MariaDB and MySQL same?

MariaDB vs MySQL Differences Even though MariaDB is a fork of MySQL, these two database management systems are still quite different: MariaDB is fully GPL licensed while MySQL takes a dual-license approach. Each handle thread pools in a different way. MariaDB supports a lot of different storage engines.

Can MySQL client connect to MariaDB?

Summary: in this tutorial, you will learn how to connect to the MariaDB server using the mysql command-line program. To connect to MariaDB, you can use any MariaDB client program with the correct parameters such as hostname, user name, password, and database name.

How do I configure MySQL to accept remote connections?

How to Allow Remote Connections to MySQLStep 1: Edit MySQL Config File.Step 2: Set up Firewall to Allow Remote MySQL Connection. Option 1: UFW (Uncomplicated Firewall) Option 2: FirewallD. Option 3: Open Port 3306 with iptables.Step 3: Connect to Remote MySQL Server.

What is the default port for MariaDB?

3306The default port for MariaDB is 3306.

How do I configure MySQL to accept remote connections?

How to Allow Remote Connections to MySQLStep 1: Edit MySQL Config File.Step 2: Set up Firewall to Allow Remote MySQL Connection. Option 1: UFW (Uncomplicated Firewall) Option 2: FirewallD. Option 3: Open Port 3306 with iptables.Step 3: Connect to Remote MySQL Server.

Can phpMyAdmin connect to MariaDB?

phpMyAdmin is a web-based tool for administering MariaDB and MySQL. It requires a web server, PHP, and a browser.

What is MariaDB vs MySQL?

MariaDB and MySQL both implement standard SQL syntax, including common table expressions and window functions as well as JSON and geospatial functions. However, MariaDB adds the INTERSECT and EXCEPT set operators, linear regression functions and more.

What port does nestat listen to?

Use the nestat command to view the status of port 3306: Shows that port 3306 only listens to 127.0.0.1, other IPs cannot be accessed Many solutions on the Internet are to display —->>> ...

Can MariaDB be accessed remotely?

Foreword: After installing MariaDB on Ubuntu16, it can only be accessed locally, and cannot be accessed remotely through Navicat in windows, and it keeps prompting an error: This article records the r...

What port does MariaDB run on?

If your system is running a software firewall (or behind a hardware firewall or NAT) you must allow connections destined to TCP port that MariaDB runs on (by default and almost always 3306).

What is MariaDB bind address?

Some MariaDB packages bind MariaDB to 127.0.0.1 (the loopback IP address) by default as a security measure using the bind-address configuration directive. Old MySQL packages sometimes disabled TCP/IP networking altogether using the skip-networking directive. Before going in to how to configure these, let's explain what each of them actually does:

Why is MariaDB bound to loopback?

MariaDB is bound to the loopback interface by default because it makes it impossible to connect to the TCP port on the server from a remote host (the bind-address must refer to a local IP address, or you will receive a fatal error and MariaDB will not start). This of course is not desirable if you want to use the TCP port from a remote host, ...

Does it matter if you have the original bind address left as the later bind address?

It doesn't matter if you have the original --bind-address left as the later --skip-bind-address will overwrite it.

Can MariaDB connect to other hosts?

If bind-address is bound to 127.0.0.1 (localhost), one can't connect to the MariaDB server from other hosts or from the same host over TCP/IP on a different interface than the loopback (127.0.0.1). This for example will not work (connecting with a hostname that points to a local IP of the host):

Can you have more than one volume on Synology?

If there is more than one volume available on your Synology NAS device, you can specify in which volume you want to create and place the databases.

Can you modify port number of MariaDB?

You can modify the port number of MariaDB 10 directly on the user interface.

Is MariaDB 10 compatible with MySQL?

It is highly compatible with MySQL and allows users to effortlessly migrate databases from MySQL to MariaDB 10.

Can you reset MariaDB password?

You can reset your MariaDB 10 database password or delete databases directly on the user interface.

What is MariaDB server IP address?

At this point, the MariaDB server is configured to allow connection from the remote system with IP address 208.117.84.50. Now, it's time to test the connection from the client system to the MariaDB server. Here we show how to do this on the command line in Linux, but you can also test this from your desktop (if not on Linux) by utilizing any MySQL remote manager such as the ones listed in the introduction to this article.

What port is MariaDB on?

If your MariaDB server is configured with the UFW firewall (which it is by default on all Webdock servers) then you will need to allow traffic on port 3306 from the remote system.

What is a WPDB?

wpdb : It is the name of the MariaDB database that the user want to connect.

What is Webdock hosting?

Webdock is a world-class hosting provider aimed at professionals and semi-professionals with the goal of providing an absolutely awesome and rock-solid hosting experience.

Can MariaDB be accessed from local users?

By default, MariaDB is configured to listen on localhost only. So it can be accessed only from local users operating on the same server as the database. In modern web application architecture, most database backends are hosted on their own dedicated server. One of the easiest ways to achieve this is to configure the database to allow remote connections.

Is MariaDB a database?

MariaDB is a free, open-source and one of the most popular relational database system around the globe. It is a drop-in replacement for MySQL database system. However, the structure and indexes of both database systems are same, this will allow you to switch your database from MySQL to MariaDB without having to alter your applications.

What IP address to connect to wpdb?

Next, you will need to grant permissions to the remote system with IP address 208.117.84.50 to connect to a database named wpdb as user wpuser. You can do it with the following command:

image

Finding The Defaults File

  • To enable MariaDB to listen to remote connections, you need to edit your defaultsfile. See Configuring MariaDB with my.cnffor more detail. Common locations for defaults files: You can see which defaults files are read and in which order by executing: The last line shows which defaults files are read.
See more on mariadb.com

Editing The Defaults File

  • Once you have located the defaults file, use a text editor to open the file andtry to find lines like this under the [mysqld] section: (The lines may not be in this order, and the order doesn't matter.) If you are able to locate these lines, make sure they are both commented out(prefaced with hash (#) characters), so that they look like this: (Again, the order of these lines don't matter) Alternativ…
See more on mariadb.com

Granting User Connections from Remote Hosts

  • Now that your MariaDB server installation is setup to accept connections fromremote hosts, we have to add a user that is allowed to connect from somethingother than 'localhost' (Users in MariaDB are defined as 'user'@'host', so'chadmaynard'@'localhost' and 'chadmaynard'@'1.1.1.1' (or'chadmaynard'@'server.domain.local') are different users that can havecompletely different pe…
See more on mariadb.com

Port 3306 Is configured in Firewall

  • One more point to consider whether the firwall is configured to allow incoming request from remote clients: On RHEL and CentOS 7, it may be necessary to configure the firewall to allow TCP access to MySQL from remote hosts. To do so, execute both of these commands:
See more on mariadb.com

Caveats

  1. If your system is running a software firewall (or behind a hardware firewall or NAT) you must allow connections destined to TCP port that MariaDB runs on (by default and almost always 3306).
  2. To undo this change and not allow remote access anymore, simply remove the skip-bind-address line or uncomment the bind-address line in your defaults file. The end result should …
  1. If your system is running a software firewall (or behind a hardware firewall or NAT) you must allow connections destined to TCP port that MariaDB runs on (by default and almost always 3306).
  2. To undo this change and not allow remote access anymore, simply remove the skip-bind-address line or uncomment the bind-address line in your defaults file. The end result should be that you should...

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9