Each Meraki network has its own event log, accessible under Network-wide > Monitor > Event log. In a combined network, click the drop-down menu at the top of the page and select the event log for one of the following options: for security appliances to display information about the MX security appliance in this network.
What is the Meraki auto VPN status page?
This page provides real-time status updates between your Meraki Auto VPN peers and non-Meraki VPN peers. You can access the VPN Status page by navigating to the Organization > Monitor > VPN Status tab, or by navigating to the Security & SD-WAN > Monitor > VPN Status tab.
How do I navigate the Meraki event log?
This article describes how to navigate the event log and filter out extraneous information for troubleshooting and monitoring purposes. Each Meraki network has its own event log, accessible under Network-wide > Monitor > Event log.
What events are reported by Meraki security appliances?
Each Meraki product offers a different variety of reported events, as listed below: The following types of events will be reported by MX security appliances: Bad Gateway: Events related to communication issues with the gateway. Regarding Bad Gateway events: These events are logged as a result of the Connection Monitoring tests failing.
How do I monitor the VPN status of my organization?
You can access the VPN Status page by navigating to the Organization > Monitor > VPN Status tab, or by navigating to the Security & SD-WAN > Monitor > VPN Status tab. The Organization > Monitor > VPN Status tab will show you the status of all MXs in your organization with site-to-site VPN enabled.
How do I check my traffic logs in Meraki?
0:421:52Meraki Dashboard Overview: Event Log - YouTubeYouTubeStart of suggested clipEnd of suggested clipIncluding security appliances switches access points systems manager devices cameras or cellularMoreIncluding security appliances switches access points systems manager devices cameras or cellular gateways. Once you make your selection. All relevant event logs will be listed.
How can I see websites visited on Meraki?
This is to track down some of the sites that the user has visited if you have cisco meraki switches.Step 1: Login to the meraki dashboard. Login and find the name of the computer that you want to find the info for.Step 2: Go to the computer page. ... Step 3: Click on Show Details. ... Step 4: Some of the important things.
Is it possible to track change logs in Meraki?
The Organization > Monitor > Change Log page displays changes made in any network within the current Organization since it was created, in the last 12 months in the EU, or in the last two years in the rest of the world.
How do I troubleshoot Meraki VPN?
Troubleshooting Tips Verify client is connecting to the primary MX WAN IP (VIP for warm spare) Verify inbound UDP 500 traffic is not being blocked/dropped upstream. If the MX is behind a NAT, port forwarding may need to be configured on the upstream device for UDP ports 500 and 4500.
Can meraki MDM track browsing history?
If you mean does Meraki the company see your traffic via internet or VPN tunnel, no. If you mean basic data that would be in an event log or traffic usage summary, yes that is stored on their servers for you to access.
How do I check my Meraki firewall logs?
Each Meraki network has its own event log, accessible under Network-wide > Monitor > Event log.
How long are Meraki logs kept?
Dashboard can maintain event logs for up three months, which can be viewed for historical purposes.
What is MAC address flapping Meraki?
A MAC Flap is caused when a switch receives packets from two different interfaces with the same source MAC address. If you are getting the behavior for a lot of other MACs, that most likely is a layer 2 loop.
How do I connect to Meraki client VPN?
To enable client VPN, choose Enabled from the Client VPN server pull-down menu on the Security Appliance > Configure > Client VPN page. The following client VPN options can be configured: Client VPN subnet: The subnet that will be used for client VPN connections.
How do I know if site VPN is working?
To verify that your VPN tunnel is working properly, it is necessary to ping the IP address of a computer on the remote network. By pinging the remote network, you send data packets to the remote network and the remote network replies that it has received the data packets.
How do you fix the connection was terminated by the remote computer before it could be completed?
The solution for Error 628: The Connection was Terminated by the Remote computer before it could be completed is given below.Check the modem Connection. Check the signal strength shown in modem access manager. ... Check Whether the Driver is installed properly. ... Update Driver. ... Make sure no applications block connection.
How do I enable split tunneling in Meraki?
Configuring Split Tunnel for WindowsNavigate to Control Panel > Network and Sharing Center > Change Adapter Settings.Right click on the VPN connection, then choose Properties.Select the Networking tab.Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.Click Advanced.More items...•
What can meraki MDM track?
Meraki MDM connects securely to Meraki cloud. Locate devices, deploy software and apps, deliver content, enforce security policies and monitor all of your devices through an intuitive web-based dashboard.” You can run thousands of devices and computers, right from the same place.
How does a meraki box work?
2:004:59Cisco Meraki teleworker solution - YouTubeYouTubeStart of suggested clipEnd of suggested clipWill be orange when it first boots up it will rotate through colors as it's connecting to the MerakiMoreWill be orange when it first boots up it will rotate through colors as it's connecting to the Meraki cloud. And once it's connected it'll go white which means it's online it's connected.
How does a meraki work?
Meraki uses an event-driven remote procedure call (RPC) engine for Meraki devices to communicate to the dashboard and for Meraki servers to send and receive data. Meraki hardware devices act as the server/receiver as the Meraki cloud initiates calls to the devices for data collection and configuration deployment.
What is Meraki VPN status?
The VPN Status page provides detailed, useful information about all VPN tunnels on your Meraki organization. This page provides real-time status updates between your Meraki Auto VPN peers and non-Meraki VPN peers. You can access the VPN Status page by navigating to the Organization > Monitor > VPN Status tab, or by navigating to the Security & SD-WAN > Monitor > VPN Status tab.
What does the ring on Meraki mean?
The ring view visually represents the total percentage of traffic distribution between Meraki Auto VPN peers. Each band or "slice" of color on the outer ring represents an MX Security Appliance or Z-series device deployed at a given site. The band width is based on the amount of VPN traffic to or from that site. Wide segments indicate MX networks that send and receive larger amounts of VPN traffic than thinner segments.
What does the color of the VPN bar mean?
The bar can display 3 colors to indicate the VPN status over the given time period. These colors also apply to the Ring View at the top right of the page and Connectivity column in the Networks list. The following colors indicate the status: Red - Peer is unreachable. Yellow - Some peers are unreachable.
How to see VPN graph?
If you're viewing this page from the Organization > Monitor > VPN Status tab, the graphs will display the aggregate data of all networks participating in the VPN for the selected time period. If you'd like to see details about a specific site, simply hover your cursor over the peer in the Networks list and another graph will be overlaid on top. If you're viewing this page from the Security & SD-WAN > Monitor > VPN Status tab, the page will display the data for that network only.
How to change the time period on VPN?
To change the selected time period, click on the dropdown next to the VPN Status at the top left of the page and select the desired time period.
What happens if VPN is not enabled?
If site-to-site VPN is not enabled on the selected network, the VPN Status link will not be visible under the Security & SD-WAN tab, but is still accessible through the Organization tab.
What does NAT type mean on Meraki?
NAT Type: This will indicate if there are any problems traversing upstream NAT device (s). Encrypted: This will indicate the VPN type and encryption.
