Remote configuration – a software development technique which allows to modify particular features of an app (mostly mobile) remotely without the necessity to launch a huge update or deploy a new version of it. For that goal, a special interface is used.
Full Answer
How to setup remote access?
Once installed, you can now connect to remote endpoints by following the steps below:
- The software needs to be downloaded on both the local and remote computers.
- Open the software on both the local and remote computers.
- Write down the ITarian ID number and password of the remote computer.
- Click “Start Connection.”
- Enter the ID number and password of the remote computer.
- Click “Connect.”
How do I enable remote access in Windows 10?
Windows 10 Fall Creator Update (1709) or later
- On the device you want to connect to, select Start and then click the Settings icon on the left.
- Select the System group followed by the Remote Desktop item.
- Use the slider to enable Remote Desktop.
- It is also recommended to keep the PC awake and discoverable to facilitate connections. ...
How do I configure Windows Home Server for remote access?
Turn on and configure Remote Web Access
- Remote Web Access overview. When you are away from your office, you can open a web browser and access Remote Web Access from anywhere that has Internet access.
- Turn on Remote Web Access. ...
- Change your region. ...
- Manage Remote Web Access permissions. ...
- Secure Remote Web Access. ...
- Manage Remote Web Access and VPN users. ...
How to set up routing and remote access?
- In Routing and Remote Access, expand the server → IPV4 → NAT.
- Right click on External Network, go to properties → Services and ports.
- Click on Add, enter the description for this service, enter the RDP port and IP address of the VPS and click on Ok.
What is MRA in Cisco?
MRA provides a secure connection for Jabber application traffic and other devices with the required capabilities to communicate without having to connect to the corporate network over a VPN. It is a device and operating system agnostic solution for Cisco Jabber clients on Windows, Mac, iOS and Android platforms.
What is the purpose of mobile and remote access MRA in the Cisco CUCM architecture?
The Mobile and Remote Access solution (MRA) supports a hybrid on-premises and cloud-based service model. This provides a consistent experience inside and outside the enterprise. MRA provides a secure connection for Jabber application traffic without having to connect to the corporate network over a VPN.
What is Cisco expressway used for?
Cisco Expressway Series (Expressway) is designed specifically for comprehensive collaboration services. It features established firewall-traversal technology and helps to redefine traditional enterprise collaboration boundaries, to support our Cisco vision of any-to-any collaboration.
Which configuration from below is needed for bussiness to business calls via expressway?
Cisco Expressway E 8.1+ A Video Endpoint, WebEx, or Jabber (configured for SIP URI Dialing) registered to the Call Manager. RMS licenses are needed for Business-to-Business calling.
What are MRA phones?
Basically, MRA (Cisco Unified Communications Mobile and Remote Access) allows endpoints such as Cisco Jabber to have their registration, call control, provisioning, messaging and presence services provided by CUCM when the endpoint is outside the enterprise network.
What is difference between Cisco Expressway C and E?
The Expressway-E is configured with a traversalserver zone to receive communicationsfrom the Expressway-C in order to allow inbound and outbound calls to traverse the NAT device. The Expressway-E has a public network domain name.
What OS is Cisco Expressway?
1 it's: Linux version 3.6.
What is the difference between expressway and freeway?
Expressways are divided highways with partial control of access, while freeways have full control of access. So, all freeways are expressways, but all expressways are not freeways. Access to freeways is completely controlled via ramps, with no other interruptions to the flow of traffic.
Is Cisco a B2B?
Cisco: Powering the B2B E-Commerce Platform with Elasticsearch | Elastic.
What is the difference between CUCM publisher and subscriber?
The publisher verifies the subscriber's authenticity and adds the subscriber's IP address to its dynamic firewall (iptables). The subscriber is allowed to access the publisher database. The database content is replicated from the publisher to the subscriber.
What is Cisco UC architecture?
Cisco Unified Communications (UC) is an IP-based communications system integrating voice, video, data, and mobility products and applications. It enables more effective, secure communications and can transform the way in which we communicate.
What are network services and feature services What is the difference between them?
To avoid throwing errors only the needed feature services are activated (i.e. allowed to start). Network services are non-optional services for that product: they are required in all deployment scenarios. You have no ability to prevent them from starting but are able to stop/start/restart them.
What is Cisco Unity Connection?
Cisco Unity Connection is a robust unified messaging and voicemail solution that provides users with flexible message access options and IT with management simplicity.
What is off-premises access?
Off-premises access: a consistent experience outside the network for Jabber and EX/MX/SX Series clients
Can a third party SIP device register to Expressway C?
Third-party SIP or H.323 devices can register to the Expressway-C and, if necessary, interoperate with Unified CM -registered devices over a SIP trunk.
What is the NAT address for the traversal client zone?
The Traversal Client zone on the Expressway-C is configured with a peer address that matches the static NAT address on the Expressway-E, which is 20.20.20.20 in this case.
Why is it required to use the Voice Services domain?
Note: It is required to use the voice services domain because you must ensure that you perform the lookup for the Collaboration Edge SRV records for the outside domain ( domain1 ).
Where is the traversal server located?
The Traversal Zone consists of the Traversal Server ( expresswayE ), located in the De-Militarized Zone (DMZ), and the Traversal Client ( expresswayC ), located inside the network:
When only one interface is used, and you configure the Expressway-E with a public IP address, what is?
When only one interface is used, and you configure the Expressway-E with a public IP address, no special considerations must be taken.
When the required SIP domains are not added on the Expressway-C, the Expressway-E does not?
When the required SIP domains are not added on the Expressway-C, the Expressway-E does not accept messages for this domain and in the diagnostic logs you see a 403 Forbidden message that is sent to the client:
Which domain must be added to service discovery?
The domain used for service discovery ( domain1) must be added.
Does SRV return IP address?
The SRV records return a Fully Qualified Domain Name (FQDN) and not an IP address.
How to turn off mobile access in Microsoft 365?
In the Microsoft 365 portal, click Admin > Exchange > Mobile > Mobile device access. Under Exchange ActiveSync Access Settings, click Edit.
What is Exchange ActiveSync?
Exchange ActiveSync, which is turned on by default, turns on mobile access for Windows Phone, Apple iPhone and iPad, Android phones, and BlackBerry devices. For BlackBerry devices, when you use Exchange ActiveSync, the only thing users will be able to do is send and receive email.
Can you change Exchange ActiveSync settings?
For BlackBerry devices, when you use Exchange ActiveSync, the only thing users will be able to do is send and receive email. You can change your Exchange ActiveSync settings as your organization’s needs change.
Where is the Configure button in Remote Access Management Console?
In the middle pane of the Remote Access Management console, in the Step 3 Infrastructure Servers area, click Configure.
How to access remote access server?
On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
How to deploy DirectAccess for remote management only?
In the DirectAccess Client Setup Wizard, on the Deployment Scenario page , click Deploy DirectAccess for remote management only, and then click Next.
How to add roles and features to DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features.
How to install Remote Access on DirectAccess?
On the DirectAccess server, in the Server Manager console, in the Dashboard, click Add roles and features. Click Next three times to get to the server role selection screen. On the Select Server Roles dialog, select Remote Access, and then click Next.
How to configure deployment type?
On the Remote Access server, open the Remote Access Management console: On the Start screen, type, type Remote Access Management Console, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
How to add domain suffix in remote access?
On the DNS Suffix Search List page, the Remote Access server automatically detects domain suffixes in the deployment. Use the Add and Remove buttons to create the list of domain suffixes that you want to use. To add a new domain suffix, in New Suffix, enter the suffix, and then click Add. Click Next.
Description
The Set-RemoteAccessConfiguration cmdlet modifies a remote access role by using a Windows PowerShell object.
Parameters
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
Centrally manage Devices with Ease
AnyDesk can be configured via a Mobile Device Management solution for the central management of mobile devices: Broad rollout. Quick updates. Fast and flexible configuration.
AnyDesk facilitates Mobile Device Management
As an IT administrator, fast and flexible distribution of software, security policies and updates are extremely important. Configuring AnyDesk via an MDM solution allows you to do exactly that – and to stay secure at all times.
What is the best remote access app for Clash of Clans?
1. TeamViewer. You must have heard about TeamViewer as it is one of the most commonly used remote access apps. TeamViewer is one of the favorite remote access tools used by gamers to play games like Clash of Clans on the big screens of their pcs.
How to access Android phone from PC?
The first option to access an Android phone from a PC remotely using AirDroid is by using the AirDroid Desktop client. Step 1: Simply, install the AirDroid app on your phone & AirDroid Desktop client on your PC. Step 2: Create an AirDroid account on your phone and use the same credentials to log in to the AirDroid desktop client.
How to connect Android device to PC?
Here we will be connecting our Android device via USB to your PC. Step 1: Go to https://github.com/Genymobile/scrcpy and install Scrcpy on your PC. Step 2: Go to “Settings”->”System”->”Developer” and enable USB debugging on your Android device.
Can you control your phone with a PC?
From MirrorGo’s interface, you will be able to control the Android phone’s contents using your PC’s mouse and keyboard .
