You have to configure Monit to allow remote access by adding your remote system IP address. We can add multiple IP addresses to access the HTTP interface from multiple systems as shown below.
Full Answer
How to configure Monit to allow remote access to HTTP interface?
2812 being the port you're trying to connect from, then http://your-ip-adress:2812 You have to configure Monit to allow remote access by adding your remote system IP address. We can add multiple IP addresses to access the HTTP interface from multiple systems as shown below.
How do I monitor the status of remote access users?
Click REPORTING to navigate to Remote Access Reporting in the Remote Access Management Console. Click Remote Client Status to navigate to the remote client activity and status user interface in the Remote Access Management Console. You will see the list of users who are connected to the Remote Access server and detailed statistics about them.
How do I connect to the Monit web server?
You can now use https://localhost:2812/to access the Monit web server over a TLS encrypted connection. Self-signed server certificates note: The Monit CLI works on a client-server basis and uses the Monit HTTP GUI to collect status from the Monit daemon and pass commands like start/stop to it.
How do I use Monit to monitor services?
Monit is very easy to use nearly out of the box. By default, it is set up to check that services are running every 2 minutes and stores its log file in “/var/log/monit.log”. These settings can be altered at the beginning of the configuration file in the set daemon and set logfile lines respectively.
How to Enable Remote Desktop
The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was a...
Should I Enable Remote Desktop?
If you only want to access your PC when you are physically sitting in front of it, you don't need to enable Remote Desktop. Enabling Remote Desktop...
Why Allow Connections only With Network Level Authentication?
If you want to restrict who can access your PC, choose to allow access only with Network Level Authentication (NLA). When you enable this option, u...
What is Monit utility?
Monit - utility for monitoring services on a Unix system
How does Monit work?
Monit is controlled via an easy to configure control file based on a free-format , token-oriented syntax. Monit logs to syslog or to its own log file and notifies you about error conditions via customisable alert messages. Monit can perform various TCP/IP network checks, protocol checks and can utilise SSL for such checks. Monit provides a HTTP(S) interface and you may use a browser to access the Monit program.
What happens when you reinitialise a Monit daemon?
Reinitialise a running Monit daemon, the daemon will reread its configuration, close and reopen log files.
What port does Monit connect to?
Once you have Monit running as a daemon process, you can call Monit with one of the following arguments. Monit will then connect to the Monit daemon (on TCP port 127.0.0.1:2812 by default) and ask the Monit daemon to perform the requested action. In other words; calling monit without arguments starts the Monit daemon, and calling monit witharguments enables you to communicate with the Monit daemon process.
What is Monit used for?
Monit can be used to test programs or scripts at certain times, much like cron, but in addition, you can test the exit value of a program and perform an action or send an alert if the exit value indicates an error. This means that you can use Monit to perform any type of check you can write a script for.
Where is the Monitrcis control file?
The default location for monitrcis ~/.monitrc. If this file does not exist, Monit will try /etc/monitrcand a few other places. See FILESfor details. You can also specify the control file directly by using the -ccommand-line switch to monit. For instance,
Does Monit CLI support HTTP?
If specified in the control file, Monit will start with HTTP support. You can then use Monit CLI to start and stop services, disable or enable service monitoring as well as view the status of each service.
How to allow remote access to PC?
The simplest way to allow access to your PC from a remote device is using the Remote Desktop options under Settings. Since this functionality was added in the Windows 10 Fall Creators update (1709), a separate downloadable app is also available that provides similar functionality for earlier versions of Windows. You can also use the legacy way of enabling Remote Desktop, however this method provides less functionality and validation.
How to connect to a remote computer?
To connect to a remote PC, that computer must be turned on, it must have a network connection, Remote Desktop must be enabled, you must have network access to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users. Before you start a connection, it's a good idea to look up the name of the computer you're connecting to and to make sure Remote Desktop connections are allowed through its firewall.
How to remotely connect to Windows 10?
Windows 10 Fall Creator Update (1709) or later 1 On the device you want to connect to, select Start and then click the Settings icon on the left. 2 Select the System group followed by the Remote Desktop item. 3 Use the slider to enable Remote Desktop. 4 It is also recommended to keep the PC awake and discoverable to facilitate connections. Click Show settings to enable. 5 As needed, add users who can connect remotely by clicking Select users that can remotely access this PC .#N#Members of the Administrators group automatically have access. 6 Make note of the name of this PC under How to connect to this PC. You'll need this to configure the clients.
Should I enable Remote Desktop?
If you only want to access your PC when you are physically using it, you don't need to enable Remote Desktop. Enabling Remote Desktop opens a port on your PC that is visible to your local network. You should only enable Remote Desktop in trusted networks, such as your home. You also don't want to enable Remote Desktop on any PC where access is tightly controlled.
How to monitor remote client activity?
To monitor remote client activity and status 1 In Server Manager, click Tools, and then click Remote Access Management. 2 Click REPORTING to navigate to Remote Access Reporting in the Remote Access Management Console. 3 Click Remote Client Status to navigate to the remote client activity and status user interface in the Remote Access Management Console. 4 You will see the list of users who are connected to the Remote Access server and detailed statistics about them. Click the first row in the list that corresponds to a client. When you select a row, the remote user activity is shown in the preview pane.
What is the management console on a remote access server?
You can use the management console on the Remote Access server to monitor remote client activity and status.
What is the default port for Monit?
But, when you change the port number, make sure you do not choose the following: 80, 443, 22, 21, 8080 and some other already in use port number.
What is the security measure for Monit?
An additional security measure to take while using the Monit Web Interface is to enable the username / password based login. You can set an username and a password so that the access to this portal is not available to anyone except the ones who know these credentials.
Is Monit running on localhost?
In the last step we showed you that Monit web interface is currently running only from the localhost. In order to access it from any external computer network or to allow access to the web interface from all IPs , you need to do the following:
What is a monit?
Monit is a helpful program that automatically monitors and manages server programs to ensure that they not only stay online consistently, but that the file size, checksum, or permissions are always correct. Additionally monit comes with a basic web interface through which all of the processes can be set up.
What port is Monit on?
Monit comes with it’s own web server running on port 2812. To configure the web interface, find and uncomment the section that begins with set httpd port 2812. Once the section is uncommented, write in your server’s IP or domain name as the address, allow anyone to connect, and then create a monit user and password.
How often does Monit run?
Monit is very easy to use nearly out of the box. By default, it is set up to check that services are running every 2 minutes and stores its log file in “/var/log/monit.log”. These settings can be altered at the beginning of the configuration file in the set daemon and set logfile lines respectively.
Does Monit reload configuration files?
Once this is configured, monit should reload and reread the configuration file, and the web interface will be available:
How to enable multimon?
Enable Multimon using one of the three methods described below: a. Click “Use all monitors for the remote session” in the client (mstsc.exe) window. b. Use the “/multimon” switch on the mstsc.exe command line. c. Add “Use Multimon:i:1” to the RDP file.
How many monitors can you use on a remote desktop?
By default, RDP protocol supports a maximum of 16 monitors. This number can be restricted to any value between 1 and 16 using one of the following three approaches:
What is span mode in remote desktop?
Span mode, introduced in Vista, allows the remote desktop to span across all monitors on the client as long as the monitors are arranged to form a rectangle. The remote session created when using span mode is still a single-monitor session. With multimon support, each monitor on the client machine is viewed as a distinct monitor in the remote session. Due to this fundamental difference, span mode has some restrictions that true multimon does not: 1. The primary monitor must be leftmost. 2. The set of monitors must form a rectangle (i.e. identical vertical resolution, and lined up in exact straight line). 3. The total of the resolutions must be below 4096x2048 (ex. 1600x1200+1600x1200 = 3200x1200). For these reasons, all monitor configurations shown below are valid for Remote Desktop multimon, whereas most of them are not valid for span mode: With true multimon support, the client-side monitors can be arranged in any order and can be of any resolution. Since a span mode remote session is essentially a single-monitor session, if a window in the remote desktop is maximized, it spans across all the monitors. With true multimon support, a window will only maximize to the extent of the containing monitor. If an application queries for the number of monitors inside a span-mode session, it will find only one monitor, whereas it will find as many monitors as are actually present on the client system when using true multimon RDP. This difference can change the behavior of applications such as PowerPoint.
What is remote desktop support?
Multiple monitor support for Remote Desktop Services allows users to open a Remote Desktop connection expanded across all the monitors on the client computer regardless of the client monitor configuration. With this feature, the user can fully utilize all the monitors connected to the client computer for the Remote Desktop connection thereby providing extra desktop space and an almost seamless experience with the client desktop that is much improved over “Span mode”. This feature will be part of Windows 7/Windows Server 2008 R2 release and works for connections to another client machine (physical or VM), or a Remote Desktop Session Host.
What is true multimon support?
With true multimon support, a window will only maximize to the extent of the containing monitor. If an application queries for the number of monitors inside a span-mode session, it will find only one monitor, whereas it will find as many monitors as are actually present on the client system when using true multimon RDP.
What is the maximum resolution of a remote monitor?
Restricting the maximum resolution of each monitor : By default, RDP restricts the maximum resolution to 4096 X 2048 per monitor . Additionally with multimon, the width and height of each remote monitor can also be restricted in one of two ways:
Can you use multiple monitors on remote desktop?
Currently this feature displays the remote desktop on all the monitors available on the client computer. It can handle any client monitor configuration supported by Windows. The following images show the Remote Desktop Multimon feature in various configurations: Display Settings UI inside a Remote Desktop session showing multiple monitors Remote Desktop Multimon Session with 5 monitors PowerPoint inside Remote Desktop session showing multiple monitors
Where is Monit configuration?
Monit configuration files are located under /etc/monit/ directory.The main configuration file is /etc/monit/monitrc. This file is highly commented out, you can reference it for all configs. By default all files located on /etc/monit/conf.d/ and /etc/monit/conf-enabled/ are read by monit when it is started, you can place your process monitoring configurations on this directory to keep things organized.
What is Monit used for?
Monit is an open source program used to monitor services on Linux systems and ensure they are always online. If for any reason the program shuts down, Monit will try to bring it back online and make it stay online consistently.
What command will display details about monit status?
Typing monit status command will display details about monit status.
What is the login name for Monit?
Login with the username as “ admin ” and password as “ monit ”.
Can you change admin:monit with username and password?
You can change admin:monit with username and password you want to use. To allow access from a different IP, add it like below:
Summary
If you want to remotely access files or apps on another PC, using remote desktop is very useful. How can you enable remote desktop in Windows 11? This is not a difficult task and you can follow four ways in this post offered by MiniTool Solution.
Enable Windows 11 Remote Desktop via Control Panel
In addition, you can turn on remote desktop in Control Panel, and here are steps you should follow:
Enable Remote Desktop in Windows 11 Command Prompt
Step 1: Click the search box, type cmd, and right-click the result to choose Run as administrator.
Enable Remote Desktop in Windows 11 PowerShell
If you prefer Windows PowerShell, you can turn on remote desktop via the command tool.