Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.
Full Answer
How do I connect my ds718+ to my Synology NAS?
Connect your NAS by searching “find.synology.com” in your browser. To begin my Synology NAS configuration, I typed “find.synology.com” into my browser address bar. Entering the URL scans the local network and detects the DS718+ connected to my router. Once you see this, hit the “Connect” button.
How to configure the host computer to allow inbound remote connections?
First, login to the host computer (at a time when you have direct access to it) and configure it to allow inbound remote connections. Step 1. Enable Remote Desktop Connection on the Host Computer
Do I need to set up remote access for Remote Desktop?
Setting up remote access is only necessary when attempting to use Remote Desktop Connection from outside of your LAN. In order to connect remotely, port 3389 must be open on your router. The host computer must be turned on, and have Remote Desktop enabled.
How do I enable Multimon on RDP?
Enable Multimon using one of the three methods described below: a. Click “Use all monitors for the remote session” in the client (mstsc.exe) window. b. Use the “/multimon” switch on the mstsc.exe command line. c. Add “Use Multimon:i:1” to the RDP file. Connect to a computer running Windows 7 or Windows Server 2008 R2.
How do I remotely access my NAS?
How to Remotely Connect to Your DeviceStep 1: Enable FTP.Step 2: Enable WebDAV.Step 3: Update User Permissions.Step 5: Use Dynamic DNS to Assign a Web Address to Your Home Network.Step 6: Set Up Your Remote Connection.Step 7: Enter and Save Your Password.More items...•
How do I access my Synology NAS remotely?
DSM 7.0 and above: Go to Control Panel > External Access > QuickConnect. DSM 6.2 and below: Go to Control Panel > QuickConnect....Via a mobile device:Open a Synology mobile app, such as DS file.Enter your QuickConnect ID, plus your DSM account and password.Click Login.
Can you access Synology NAS from outside network?
Overview. With QuickConnect, you can easily connect to your Synology NAS over the Internet without the hassle of setting up port forwarding rules or other complicated network settings.
How do I access files from Synology NAS outside the local network?
Enter the following information:Storage: Select Synology.Drive: Select a network drive letter from the drop-down menu.Address: Enter the IP address or the hostname of your Synology NAS.Port: Enter 5006 or the port that you specified for WebDAV on your Synology NAS.Account: Enter your DSM account and password.
How do I connect to Synology NAS locally?
How to troubleshoot connecting to your Synology NASHead to the Synology website.Choose your NAS model.Download Synology Assistant.Install the software.Run Synology Assistant.Allow the suite to search your network.Right-click your NAS and choose Connect.
How do I access Synology NAS remotely Ddns?
Setting up DDNSGo to Control Panel > External Access > DDNS.Click Add.A dialog box appears prompting you to edit the following settings: ... Click Test Connection to see if settings are correct.If you select Synology as the service provider, you can configure the following settings: ... Click OK to save and finish.
Why can't I access my Synology NAS remotely?
For Synology NAS. Check if QuickConnect is enabled. For DSM 6.2: Go to Control Panel > QuickConnect and ensure the Enable QuickConnect checkbox is ticked. Afterward, confirm the services you wish to access via QuickConnect are enabled at the Advanced tab.
How do I share a NAS drive on my network?
First, you will need to enable NFS sharing protocol on your Synology NAS:Go to “Control Panel” > “Win/Mac/NFS” > “NFS Service” > “Enable NFS”.Go to “Control Panel” > “Shared Folders” > Select the folder you want to modify permissions and Select “Privileges” > “NFS Privileges”.More items...•
How do I get to Synology outside?
The step-by-step planNext, go to the configuration screen.Select 'QuickConnect'.Select the "Enable QuickConnect" check box.Log in with a Synology account. ... After logging in, choose a name for your NAS with which you can access it from outside your network and enter it in 'QuickConnect ID'.More items...•
How do I map a network drive over WAN?
1:265:09How to map a network drive in Windows Explorer over the Internet ...YouTubeStart of suggested clipEnd of suggested clipSo you're gonna set it all up create a connection. And you will have you will have a folder eitherMoreSo you're gonna set it all up create a connection. And you will have you will have a folder either on your mac or on your windows. You'll see that drive there so you can move files. Around.
Why can't I access my Synology NAS remotely?
For Synology NAS. Check if QuickConnect is enabled. For DSM 6.2: Go to Control Panel > QuickConnect and ensure the Enable QuickConnect checkbox is ticked. Afterward, confirm the services you wish to access via QuickConnect are enabled at the Advanced tab.
How do I find the IP address of my Synology NAS?
0:003:27How To Find IP Address of Synology NAS Diskstation - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce logged in go to the control panel. And then click on network. Then click on network interface.MoreOnce logged in go to the control panel. And then click on network. Then click on network interface.
What is the IP address of my NAS?
To find the IP address of your Synology NAS, open the Synology Assistant app and wait for it to scan your network for available Synology devices. Once the scan is complete, the IP address of all the available Synology devices on your network will be displayed as marked in the screenshot below.
How do I use Synology with QuickConnect?
QuickConnectGo to Control Panel > External Access > QuickConnect.Check Enable QuickConnect.If you have not logged in to your Synology Account, a login window will pop up. Enter your existing Synology Account information or register a new account on the window.Specify a new QuickConnect ID. ... Click Apply.
What does the download speed on the internet depend on?
The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you s...
What is the height of the Synology DiskStation DS718+?
The Synology DiskStation DS718+ has a height of 157 mm.
What is the width of the Synology DiskStation DS718+?
The Synology DiskStation DS718+ has a width of 103.5 mm.
What is the depth of the Synology DiskStation DS718+?
The Synology DiskStation DS718+ has a depth of 232 mm.
What certifications does the Synology DiskStation DS718+ have?
The Synology DiskStation DS718+ has the following certifications: FCC Class B\nCE Class B\nBSMI Class B.
Is the manual of the Synology DiskStation DS718+ available in English?
Yes, the manual of the Synology DiskStation DS718+ is available in English .
Need help?
Do you have a question about the Synology DiskStation DS718+ or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Synology DiskStation DS718+ owners to properly answer your question.
Frequently Asked Questions
Below, you will find the most frequently asked questions about the Synology DiskStation DS718+.
How to turn on NAS?
Hitting the power button will only turn the NAS on – you need to start the configuration wizard manually.
Where should I place my NAS?
You can place your NAS in any location, but preferably somewhere cooler. Ensure that any air intake ports or fan vents are free from obstruction. I find that the best place is simply somewhere near the switch or router. Many NAS hard drives are relatively loud, so avoid keeping your NAS near your work area.
How to insert a hard drive into a NAS?
With the hard drive mounted in the caddy, slide the caddy into the NAS drive bay. Inserting the drive should be a smooth process, with very slight resistance towards the end as the drive clips onto the data and power ports inside the NAS unit.
How far can a LAN cable be?
The most likely cable you will be using will be a CAT6, which allows a maximum of 100 meters (328 feet).
What is the main port of interest for NAS?
All NAS units will also come with an array of ports. The main port of interest will be the network port used to link the NAS with Local Area Networks (LAN). Some NAS drives may have more than one network port.
Can a NAS drive be set up?
Most NAS drives offer very basic physical interactivity. They are meant to be set up once and left alone to run the rest of the time. It is common to mount hard drives via the front panel of the NAS – this design allows for easier access.
Can you force a caddy into a NAS?
Never force a drive caddy into the NAS. If you encounter strong resistance, you are likely attempting to mount it incorrectly. If so, remove the caddy and try to re-insert it. With the drive mounted, you can then attach the power brick and LAN cable.
What is QuickConnect ID?
After you log in, create a QuickConnect ID. This is a username of sorts that you’ll use to access your NAS remotely.
Is it too late to set up Synology NAS?
If you changed your mind, though, it’s never too late to set it up. Plus, it’s fairly easy to do.
What port is needed to connect to a remote desktop?
Setting up remote access is only necessary when attempting to use Remote Desktop Connection from outside of your LAN. In order to connect remotely, port 3389 must be open on your router. The host computer must be turned on, and have Remote Desktop enabled. And finally, the user attempting to use RDC must have permission to connect to that computer.
How to connect to a remote desktop?
Launch Application. Click the ‘Start’ menu. Click ‘All Programs’. Click ‘Accessories’. Click ‘Remote Desktop Connections’. Step 3. Connect to the host computer. Host ID (LAN) If you are inside of your LAN, enter the name of the computer you are trying to connect to.
What is Remote Desktop Connection?
This is just one way that a remote desktop connection can save you a lot of headaches.
What is RDC in Windows 10?
Windows Remote Desktop Connection (RDC) is a feature that enables you to connect and use another Windows computer, either within your LAN or via the Internet. You can access all of your programs and files just as if you were sitting directly at your computer. The RDC feature operates on the backbone of the Windows Remote Desktop Protocol (RDP).
How to reach any machine from the outside world?
By configuring internal port forwarding rules, you can reach any machine from the outside world by appending the external port to your address. For example:
How to customize your connection?
To customize your connection, click ‘Options’ and select a navigation tab at the top of the windows. From there, you can choose your display settings, timeout option, and other things according to your preference.
Can you remotely connect to another computer without leaving your desk?
However, when you are inside of your LAN, Remote Desktop Connection should perform optimally, allowing you to manage another computer without leaving your desk.
What is multi-nets NAT?
Multi-Nets NAT is configured to enable the Internet access of different subnets. If you don’t configure it, your VPN connection for different subnets would not be affected, thus you could configured it according to your actual requirement.
Why is a static route required?
Static Route is required to make sure that packets sent from the remote subnet 192.168.10.0/24 could be forwarded to different subnets. Here we shall configure the IP address of switch as the Next Hop for packets send to each subnets different from LAN of VPN Router_2 on Transmission > Routing > Static Route as follows:
Can you configure static routing on a VPN?
Apart from configuring VPN connections on VPN Routers, we shall also configure Static Routing and Multi-Nets NAT on VPN Router which contains multiple subnets (In this example it is VPN Router_2).
What is span mode in remote desktop?
Span mode, introduced in Vista, allows the remote desktop to span across all monitors on the client as long as the monitors are arranged to form a rectangle. The remote session created when using span mode is still a single-monitor session. With multimon support, each monitor on the client machine is viewed as a distinct monitor in the remote session. Due to this fundamental difference, span mode has some restrictions that true multimon does not: 1. The primary monitor must be leftmost. 2. The set of monitors must form a rectangle (i.e. identical vertical resolution, and lined up in exact straight line). 3. The total of the resolutions must be below 4096x2048 (ex. 1600x1200+1600x1200 = 3200x1200). For these reasons, all monitor configurations shown below are valid for Remote Desktop multimon, whereas most of them are not valid for span mode: With true multimon support, the client-side monitors can be arranged in any order and can be of any resolution. Since a span mode remote session is essentially a single-monitor session, if a window in the remote desktop is maximized, it spans across all the monitors. With true multimon support, a window will only maximize to the extent of the containing monitor. If an application queries for the number of monitors inside a span-mode session, it will find only one monitor, whereas it will find as many monitors as are actually present on the client system when using true multimon RDP. This difference can change the behavior of applications such as PowerPoint.
What is remote desktop support?
Multiple monitor support for Remote Desktop Services allows users to open a Remote Desktop connection expanded across all the monitors on the client computer regardless of the client monitor configuration. With this feature, the user can fully utilize all the monitors connected to the client computer for the Remote Desktop connection thereby providing extra desktop space and an almost seamless experience with the client desktop that is much improved over “Span mode”. This feature will be part of Windows 7/Windows Server 2008 R2 release and works for connections to another client machine (physical or VM), or a Remote Desktop Session Host.
How is this different from “Span” mode?
With multimon support, each monitor on the client machine is viewed as a distinct monitor in the remote session. Due to this fundamental difference, span mode has some restrictions that true multimon does not: 1. The primary monitor must be leftmost. 2. The set of monitors must form a rectangle (i.e. identical vertical resolution, and lined up in exact straight line). 3. The total of the resolutions must be below 4096x2048 (ex. 1600x1200+1600x1200 = 3200x1200). For these reasons, all monitor configurations shown below are valid for Remote Desktop multimon, whereas most of them are not valid for span mode: With true multimon support, the client-side monitors can be arranged in any order and can be of any resolution. Since a span mode remote session is essentially a single-monitor session, if a window in the remote desktop is maximized, it spans across all the monitors. With true multimon support, a window will only maximize to the extent of the containing monitor. If an application queries for the number of monitors inside a span-mode session, it will find only one monitor, whereas it will find as many monitors as are actually present on the client system when using true multimon RDP. This difference can change the behavior of applications such as PowerPoint.
How to enable multimon?
Enable Multimon using one of the three methods described below: a. Click “Use all monitors for the remote session” in the client (mstsc.exe) window. b. Use the “/multimon” switch on the mstsc.exe command line. c. Add “Use Multimon:i:1” to the RDP file.
How many monitors can you use on a remote desktop?
By default, RDP protocol supports a maximum of 16 monitors. This number can be restricted to any value between 1 and 16 using one of the following three approaches:
What is true multimon support?
With true multimon support, a window will only maximize to the extent of the containing monitor. If an application queries for the number of monitors inside a span-mode session, it will find only one monitor, whereas it will find as many monitors as are actually present on the client system when using true multimon RDP.
What is the maximum resolution of a remote monitor?
Restricting the maximum resolution of each monitor : By default, RDP restricts the maximum resolution to 4096 X 2048 per monitor . Additionally with multimon, the width and height of each remote monitor can also be restricted in one of two ways: