Go to Windows Service manager under ControlPanel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again. --->Done this
Full Answer
How do I troubleshoot netextender that won't open?
Navigate to Windows Service manager under Control Panel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again.
Why did remote access connection manager fail to start?
"Remote Access Connection Manager failed to start because it could not load one or more communication DLLs. Ensure that your communication hardware is installed and then restart the Remote Access Connection Manager service. If the problem persists, contact the system administrator. There was an unknown error."
How to fix Windows Remote Access service error-netextender SonicWall?
Windows Remote Access Service Error - NetExtender SonicWall - Windows 10 1 Updated network drivers. 2 Changed the Remote Access Auto Connection Manager and Remote Access Connection Manager to automatic (as recommended by... 3 Tried uninstall and reinstall application. More ...
How do I set up remote access connection manager?
1. Click on Start. 2. Type Services.msc in the search field and hit enter. Note: The common dependency service for "Remote Access Connection Manager" and "Remote Access Auto Connection Manager" is " Secure Socket Tunneling Protocol Service ".
Why is SonicWALL NetExtender not connecting?
NetExtender cannot connect. Navigate to Device Manager and check if the Dell SonicWALL SRA NetExtender Adapter has been installed successfully. If not, delete the adapter from the device list, reboot the machine and install NetExtender again.
How do I fix Windows Remote Access Service?
Make Sure the PC has an Internet connection and Windows Server is up to date. Update the PC in case of any pending updates. Go to Services and find Remote Access Auto Connection Manager and Remote Access Connection Manager Services and start them manually. Reboot the PC and try connecting again.
What is an RAS error?
If you install the NX client on Win10, you may get a RAS error (remote access service) that immediately disconnects your SSLVPN session after you connect. To fix this, you must manually kill the svchost.exe process that is tied to the RAS service. You can confirm this by opening up services.
How do I restart Windows Remote Desktop Service?
To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.
What is Remote Access Connection Manager?
Remote Access Connection Manager (RasMan) is a Windows service which manages virtual private network (VPN) connections from your computer to the Internet and if this service is disabled, our VPN client app will fail to start.
How do I update my NetExtender?
The NetExtender VPN Windows client will be automatically updated after upgrading the firmware the next time it connects, only if it was initially installed from the Virtual Office Portal by clicking on the NetExtender icon or if the administrator downloaded and installed the .exe file located under the NetExtender | ...
What is the latest version of Sonicwall Netextender?
10.0.286Once you have extracted the folder, within the NetExtender\Windows folder you will find the latest version which, at the time of writing this is 10.0. 286.
What is RAS in Network?
Remote Access Service (RAS) provides remote access capabilities to client applications on computers running Windows.
How do I remove Netextender from registry?
Please use the Netextender clean up tool to Uninstall the Netextender and clear all registry entry of the Netextender on the machine.Run the Netextender cleanup tool with Admin rights.Reboot the machine after running the cleanup tool.
Can I restart a remote server?
Restart the Remote Computer with Command Line You can use the option /r and specify the remote computer name to display the prompt on the remote computer and give it a minute before it restarts. You can also use the /s option to shutdown the remote computer.
How do I start Remote Desktop from command line?
MSTSC is the command that you need to use to open Windows Remote Desktop in the command prompt. You can type MSTSC directly in to the search box on Windows 10 (or click on Start > Run in earlier Windows versions). You can also use the MSTSC command directly from the command line as well.
How can I tell if RDP is running?
Check the status of the RDP protocol on a remote computerFirst, go to the Start menu, then select Run. ... In the Registry Editor, select File, then select Connect Network Registry.In the Select Computer dialog box, enter the name of the remote computer, select Check Names, and then select OK.More items...•
How do I reset my Ras tool?
How to restart RAS serviceOpen the Services app, click Start and type Services.Find Remote Access Connection Manager.Right-click and choose Restart.
How do you check port 3389 is open or not?
Open a command prompt Type in "telnet " and press enter. For example, we would type “telnet 192.168. 8.1 3389” If a blank screen appears then the port is open, and the test is successful.
How do you check RDP is enabled or not?
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server and to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services. If the value of the fDenyTSConnections key is 0, then RDP is enabled. If the value of the fDenyTSConnections key is 1, then RDP is disabled.
How do I enable Remote Access?
Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.
What is RAS error?
If you install the NX client on Win10, you may get a RAS error (remote access service) that immediately disconnects your SSLVPN session after you connect.
How to stop svchost.exe?
Open task manager, go to services, find RAS, and right click. Select "go to details" and it will bring you the correct svchost.exe process. End the task; this will stop the service.
How to stop Rasman service?
Restart the RAS service. Open the Task Manager, go to Services, find RAS or RasMan, right click and select "go to details" and it will bring up the correct svchost.exe process - End the task to stop the service. Go back to services and start the RAS manually, then try to log back in to NetExtender. Works for me!
How to open devmgmt.msc?
Press the Windows + R keys to open the Run dialog box. Type in the following text, and then press Enter. devmgmt.msc
How to stop svchost.exe?
Open the Task Manager, go to Services, find RAS or RasMan, right click and select "go to details" and it will bring up the correct svchost.exe process - End the task to stop the service.
How to check if NetExtender is installed?
Navigate to Device Manager and check if the Dell SonicWALL SRA NetExtender Adapter has been installed successfully. If not, delete the adapter from the device list, reboot the machine and install NetExtender again.
What OS is NetExtender compatible with?
1. Check your OS Version, NetExtender only supports Windows Vista or above, Mac OS X 10.5 or above with Apple Java 1.6.0_10 or above, and Linux OpenSUSE in addition to Fedora Core and Ubuntu. An i386-compatible Linux distribution is required, along with Sun Java 1.6.0_10+. 2.
Description
When connecting to an appliance using an SSLVPN tunnel, through Net Extender on a Windows Machine you receive the following error:
Cause
This issue seems to occur when the WAN Miniport (IP and PPTP) network devices are deleted, corrupted, or otherwise broken on the End Device.
Resolution
Make Sure the PC has an Internet connection and Windows Server is up to date. Update the PC in case of any pending updates.
How to start Remote Access Connection Manager?
1. Click on Start. 2. Type Services.msc in the search field and hit enter. Note: The common dependency service for "Remote Access Connection Manager" and "Remote Access Auto Connection Manager" is " Secure Socket Tunneling Protocol Service ". Make sure that you check the properties which ever service you are trying to start, ...
How to open Device Manager?
Open Device Manager by clicking the Start button, clicking Control Panel, clicking System and Maintenance,and then clicking Device Manager. If you are prompted for an administrator password or confirmation, type the assword or provide confirmation. 2.
How to check if NetExtender is installed?
Navigate to Device Manager and check if the Dell SonicWALL SRA NetExtender Adapter has been installed successfully. If not, delete the adapter from the device list, reboot the machine and install NetExtender again.
What OS does NetExtender support?
Check your OS Version, NetExtender only supports Win2000 or above, Mac OS X 10.5 or above with Apple Java 1.6.0_10 or above, and Linux OpenSUSE in addition to Fedora Core and Ubuntu. An i386-compatible Linux distribution is required, along with Sun Java 1.6.0_10+.
Can NetExtender install under administrator?
Check that the user has administrator privilege, NetExtender can only install/work under the user account with administrator privileges.