The below error message is displayed by the NetExtender client as the reason: The server is not reachable. The server may be down or your Internet settings may be down.
Full Answer
How to resolve the netextender remote access auto connection manager error?
Hope someone can help me in resolving this issue. Please go to Windows Service manager, run "services.msc", then Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install\configure NetExtender again.
Why won't netextender work on my computer?
Go to Windows Service manager under ControlPanel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again. --->Done this
How to fix Windows Remote Access service error-netextender SonicWall?
Windows Remote Access Service Error - NetExtender SonicWall - Windows 10 1 Updated network drivers. 2 Changed the Remote Access Auto Connection Manager and Remote Access Connection Manager to automatic (as recommended by... 3 Tried uninstall and reinstall application. More ...
Why is my certificate not being trusted in netextender?
You should not see a warning again for the Certificate not being trusted from this Windows 10 computer or Security Errors and disconnections in NetExtender for these errors. This type of Security Error is typically caused when using a HTTPS URL that does not have a Public Certificate assigned to it.
How do I fix Windows Remote Access Service?
Make Sure the PC has an Internet connection and Windows Server is up to date. Update the PC in case of any pending updates. Go to Services and find Remote Access Auto Connection Manager and Remote Access Connection Manager Services and start them manually. Reboot the PC and try connecting again.
Why is my NetExtender not working?
NetExtender cannot connect. Navigate to Device Manager and check if the Dell SonicWALL SRA NetExtender Adapter has been installed successfully. If not, delete the adapter from the device list, reboot the machine and install NetExtender again.
What is an RAS error?
If you install the NX client on Win10, you may get a RAS error (remote access service) that immediately disconnects your SSLVPN session after you connect. To fix this, you must manually kill the svchost.exe process that is tied to the RAS service. You can confirm this by opening up services.
How do I restart Windows Remote Desktop Service?
To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.
Why is my SonicWall not connecting?
To fix it, you just need to restart your router. SonicWall VPN won't connect – Antivirus is a common cause for VPN problems. To fix this issue, disable your antivirus temporarily and check if that helps.
Why wont my SonicWall connect?
Check your browser settings to make sure the proxy is turned off (if you do not have a proxy in your LAN). Make sure you don't have any open applications like VPN Client etc. Disable any Software Firewall or the Windows Firewall. Try different WAN Link Speed for example 10 Mbps-full duplex ,100 Mbps full duplex etc.
How do I update my NetExtender?
The NetExtender VPN Windows client will be automatically updated after upgrading the firmware the next time it connects, only if it was initially installed from the Virtual Office Portal by clicking on the NetExtender icon or if the administrator downloaded and installed the .exe file located under the NetExtender | ...
What is RAS in Network?
Remote Access Service (RAS) provides remote access capabilities to client applications on computers running Windows.
What is the latest version of Sonicwall NetExtender?
10.0.286Once you have extracted the folder, within the NetExtender\Windows folder you will find the latest version which, at the time of writing this is 10.0. 286.
Can I restart a remote server?
Restart the Remote Computer with Command Line You can use the option /r and specify the remote computer name to display the prompt on the remote computer and give it a minute before it restarts. You can also use the /s option to shutdown the remote computer.
How can I tell if RDP is running?
Check the status of the RDP protocol on a remote computerFirst, go to the Start menu, then select Run. ... In the Registry Editor, select File, then select Connect Network Registry.In the Select Computer dialog box, enter the name of the remote computer, select Check Names, and then select OK.More items...•
What is the RDP service name?
TermServiceRemote Desktop ServicesOther namesTerminal ServicesOperating systemMicrosoft WindowsService nameTermServiceTypeRemote desktop softwareWebsitedocs.microsoft.com/en-us/windows/win32/termserv/terminal-services-portal2 more rows
Where can I download NetExtender?
Go to https://www.mysonicwall.com. Version 9.0. 0.274 can be downloaded by selecting the Downloads section in the footer of the login page. Select NetExtender, and choose version 9.0.
Where are NetExtender logs stored?
The NetExtender log displays information on NetExtender session events. The log is a file named NetExtender. dbg . It is stored in the directory: C:\Program Files\SonicWall\SSL VPN\NetExtender.
How do I remove NetExtender from Windows 10?
ResolutionOpen a command prompt by going to Start Menu | Run. Type cmd, and hit Enter.Type the following command to remove the service: sc delete SonicWall_NetExtender. NOTE: Run the command prompt (cmd) as Administrator.Refresh the Services list. The service should have disappeared.
How do I stop SonicWall NetExtender service?
Please use the NetExtender.exe file so that you can start and stop service in Control Panel.
How to stop Rasman service?
Restart the RAS service. Open the Task Manager, go to Services, find RAS or RasMan, right click and select "go to details" and it will bring up the correct svchost.exe process - End the task to stop the service. Go back to services and start the RAS manually, then try to log back in to NetExtender. Works for me!
How to open devmgmt.msc?
Press the Windows + R keys to open the Run dialog box. Type in the following text, and then press Enter. devmgmt.msc
Description
Due to the security updates from Microsoft on the Windows 10 platform for SSL traffic. Self-Assigned Certificates are not trusted and can cause connectivity issues from applications using SSL as a form of connecting such as SSLVPN / NetExtender.
Resolution
Export the SonicWalls Self-Signed HTTPS Management Certificate from Browsers