Remote-access Guide

netextender the windows remote access service has encountered an error

by Kobe Legros Published 2 years ago Updated 2 years ago
image

Getting an error "Remote Access Service Error" while establishing the connection usng SonicWall Netextender. is commonly caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be fixed with special software that repairs the registry and tunes up system settings to restore stability

Full Answer

How to resolve the netextender remote access auto connection manager error?

Hope someone can help me in resolving this issue. Please go to Windows Service manager, run "services.msc", then Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install\configure NetExtender again.

Why won't netextender work on my computer?

Go to Windows Service manager under ControlPanel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again. --->Done this

How to fix Windows Remote Access service error-netextender SonicWall?

Windows Remote Access Service Error - NetExtender SonicWall - Windows 10 1 Updated network drivers. 2 Changed the Remote Access Auto Connection Manager and Remote Access Connection Manager to automatic (as recommended by... 3 Tried uninstall and reinstall application. More ...

How to fix the Windows Remote Access Service (RAS) has encountered an error?

Navigate to Windows Device Manager --> Network Adaptores and uninstall the WAN Miniport (IP) and WAN Miniport (PPTP) devices, then scan for the hardware changes. Once it done the hardware changes try to use the NetExtender. For resolving The Windows Remote Access Service (RAS) has encountered an error problem, Please follow the below step;

How to stop Rasman service?

How to open devmgmt.msc?

About this website

image

How do I fix Windows Remote Access Service?

Make Sure the PC has an Internet connection and Windows Server is up to date. Update the PC in case of any pending updates. Go to Services and find Remote Access Auto Connection Manager and Remote Access Connection Manager Services and start them manually. Reboot the PC and try connecting again.

How do I fix NetExtender service is not responding?

Navigate to Windows Service manager under Control Panel > Administrator Tools > Services. Look for the Remote Access Auto Connection Manager and Remote Access Connection Manager to see if those two services have been started. If not, set them to automatic start, reboot the machine, and install NetExtender again.

What is an RAS error?

If you install the NX client on Win10, you may get a RAS error (remote access service) that immediately disconnects your SSLVPN session after you connect. To fix this, you must manually kill the svchost.exe process that is tied to the RAS service. You can confirm this by opening up services.

How do I restart Windows remote Desktop Service?

To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.

Why does my SonicWall NetExtender keeps disconnecting?

NetExtender has been disconnected for one of the following reasons: There was a break in the network connection. The connection was idle for longer than the configured idle timeout. Your user account was logged out of the SSL VPN portal.

How do I remove NetExtender from Windows 10?

ResolutionOpen a command prompt by going to Start Menu | Run. Type cmd, and hit Enter.Type the following command to remove the service: sc delete SonicWall_NetExtender. NOTE: Run the command prompt (cmd) as Administrator.Refresh the Services list. The service should have disappeared.

How do I update my NetExtender?

The NetExtender VPN Windows client will be automatically updated after upgrading the firmware the next time it connects, only if it was initially installed from the Virtual Office Portal by clicking on the NetExtender icon or if the administrator downloaded and installed the .exe file located under the NetExtender | ...

How do I completely remove NetExtender?

Please use the Netextender clean up tool to Uninstall the Netextender and clear all registry entry of the Netextender on the machine.Run the Netextender cleanup tool with Admin rights.Reboot the machine after running the cleanup tool.

What is the latest version of NetExtender?

The .exe file version of the latest NetExtender can be found in the admin interface of the firewall. Once you have extracted the folder, within the NetExtender\Windows folder you will find the latest version which, at the time of writing this is 10.0. 286.

How do I restart a remote computer without logging in?

At the command prompt, type shutdown -r -m \\MachineName -t -01 then hit Enter on your keyboard. The remote computer should automatically shut down or restart depending on the switches you choose.

How do I enable routing and remote access service?

Right-click the server, and then click Configure and Enable Routing and Remote Access to start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN) to permit remote computers to dial in or connect to this network through the Internet.

How do I restart a frozen computer remotely?

CTRL+ALT+END: Reboots the remote computer. Press CTRL+ALT+END, then click on the Power icon seen at bottom-right. These are the choices you may see, in Windows 10.

How do I stop SonicWall NetExtender service?

Please use the NetExtender.exe file so that you can start and stop service in Control Panel.

How do I completely remove NetExtender?

Please use the Netextender clean up tool to Uninstall the Netextender and clear all registry entry of the Netextender on the machine.Run the Netextender cleanup tool with Admin rights.Reboot the machine after running the cleanup tool.

Where can I download NetExtender?

Go to https://www.mysonicwall.com. Version 9.0. 0.274 can be downloaded by selecting the Downloads section in the footer of the login page. Select NetExtender, and choose version 9.0.

Where are NetExtender logs stored?

The NetExtender log displays information on NetExtender session events. The log is a file named NetExtender. dbg . It is stored in the directory: C:\Program Files\SonicWall\SSL VPN\NetExtender.

[SOLVED] NetExtender RAS Error on Windows 10 - SonicWALL

I just solved this exact problem for a user. After trying all the usual and not so usual things (uninstall, reinstall, rebooting, RAS services, resetting TCP/IP, etc.), the thing that worked was going in to Device Manager - Networking adapters, uninstalling the WAN Miniport (IP) and WAN Miniport (PPTP) devices, then Scan for hardware changes.

Netextender keeps crashing with Windows Remote Access Service Error

Hi Mimar, no, sadly we never found a solution for this. Its primarily affecting one user, and he has to totally uninstall and reinstall Netextender every time the problem surfaces.

Getting an error "Remote Access Service Error" while - Microsoft Community

Hi Deepak, This issue could have occurred due to the Remote Access Service not working. To fix this issue, I would have you refer to the article and check if it helps.

netextender on windows 10 - RAS Error — SonicWall Community

windows 10 updated. test using different version of NetExtender. after authentication crash. only on this pc. Have you suggestion ?

Windows Remote Access Service Error occured while connecting to Net ...

Products. Network Security. Next Generation Firewall Next-generation firewall for SMB, Enterprise, and Government; Security Services Comprehensive security for your network security solution; Network Security Manager Modern Security Management for today’s security landscape; Advanced Threat Protection. Capture ATP Multi-engine advanced threat detection

windows remote access service error netextender sonicwall windows 10

The client provides anytime, anywhere access to critical applications such as email, virtual desktop sessions and other Windows applications. I noticed on the device manager that I have 6 unknown devices that are all listed as

How to stop Rasman service?

Restart the RAS service. Open the Task Manager, go to Services, find RAS or RasMan, right click and select "go to details" and it will bring up the correct svchost.exe process - End the task to stop the service. Go back to services and start the RAS manually, then try to log back in to NetExtender. Works for me!

How to open devmgmt.msc?

Press the Windows + R keys to open the Run dialog box. Type in the following text, and then press Enter. devmgmt.msc

How to stop Rasman service?

Restart the RAS service. Open the Task Manager, go to Services, find RAS or RasMan, right click and select "go to details" and it will bring up the correct svchost.exe process - End the task to stop the service. Go back to services and start the RAS manually, then try to log back in to NetExtender. Works for me!

How to open devmgmt.msc?

Press the Windows + R keys to open the Run dialog box. Type in the following text, and then press Enter. devmgmt.msc

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9