Re: Remote Access Readynas RND2000 duo V2 You should still be able to use Ready Remote with your NAS (you can not use ReadyCloud, as that requires OS 6). Another approach is to use a router that supports OpenVPN (some Nighthawk models and Orbi support it).
How do I access my ReadyNAS remotely?
Using the computer from which you want to remotely access a ReadyNAS system, visit http://www.netgear.com/ReadyNAS-remote.
How do I access ReadyNAS duo?
Simply search for the hostname or IP address of your network-attached storage in File Explorer, or browse for the device in RAIDar. To log in to the NAS from a remote location, however, you must install and configure ReadyNAS Remote on your Duo and on the appropriate computer.
How do I access my ReadyNAS admin page?
Access the web admin page of the ReadyNAS by clicking Admin Page in RAIDar or enter the URL https://ReadyNAS_IP_address/admin - where ReadyNAS_IP_address is the IP Address seen in RAIDar.
How do I direct connect between ReadyNAS and PC?
How do I direct-connect between ReadyNAS and PC/Mac?Assign a static IP address to the ReadyNAS, and set your PC with a static IP in the same subnet.Connect the ReadyNAS and PC NIC using a straight or crossover Ethernet cable.Power on the ReadyNAS and scan with RAIDar to locate the ReadyNAS.
How do I map a ReadyNAS to a network drive?
Mapping a network drive is a method to connect to a shared network folder, such as a share on a ReadyNAS storage system....To map a network drive in Windows 7 or Windows Vista:Click Start > Computer > Map network drive.In the window that opens, choose an available letter from the Drive list.More items...
How do I reset my ReadyNAS to factory settings?
To perform a factory reset, continue to hold the Reset button until all Disk LEDs flash twice (once at 5 seconds and then 25 seconds later), and then release the button.
How do I access my Netgear NAS storage?
Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system.Click the Start button under Set up a new ReadyNAS.Click the Discover button.
What is the default password for Netgear NAS?
Most NETGEAR products: Username for all models: admin. Password for current models: password. Password for older models: 1234.
How do I change my Netgear ReadyNAS IP address?
Click Change adapter settings. Right click on the connected NIC and click Properties. Select Internet Protocol Version 4 (TCP/IPv4) > click Properties. Select Use the following IP address > Enter an IP address in the range of 169.254.
Can I connect NAS HDD directly to PC?
Yes, you could plug just about any type of specific-use optimized drive in your system and as long as your interfaces and minimum requirements line up, it will technically work. A NAS drive connects in the same way a standard desktop drive would.
How do I connect to a NAS server?
Business Storage Windows Server NAS - How to Access with Remote DesktopPress the Windows key ( ... Press the Start button.In the Search files and folders field, type the following: ... Open the Remote Desktop Connection application.Enter the IP address of the NAS device, then click Connect. ... For the user, enter: Administrator.More items...
What is Netgear NAS?
The Netgear ReadyNAS 202 is a speedy consumer/SOHO network-attached storage (NAS) device that gives you access to your documents, music, photos, and videos whether you're at home or away. It's a simple way to get a personal cloud setup.
Complimentary Support
NETGEAR provides complimentary technical support for NETGEAR products for 90 days from the original date of purchase.
NETGEAR Premium Support
A single point of support around the clock. GearHead Technical Support makes it easy to fix issues on not just your NETGEAR purchase but for your entire home network. The service includes support for the following:
