Select the ReadyNAS Remote check box and click the Save button. Click the Manage ReadyNAS Remote button. The Remote Access window displays. Use the interface to grant users permission to access your ReadyNAS system with ReadyNAS Remote add-on.
Full Answer
What is ReadyNAS remote and how does it work?
With ReadyNAS Remote, your ReadyNAS system and your remote devices access a remote server at NETGEAR and use a peer-to-peer (P2P) virtual private network (VPN) connection. Data transmission over the Internet goes through an encrypted tunnel, so your data stays private as it transfers to and from your ReadyNAS system.
How do I access the ReadyNAS admin page?
The ReadyNAS Admin Page can only be access when you are on the same network (LAN) as your device, unless you use the ReadyCLOUD Desktop client.. Not what you're looking for? Return to the ReadyCLOUD FAQ. After logging into ReadyCLOUD website remote from your network, you may notice some Admin Page links.
How do I get technical support for Netgear products?
NETGEAR provides complimentary technical support for NETGEAR products for 90 days from the original date of purchase. GearHead Support is a technical support service for NETGEAR devices and all other connected devices in your home. Advanced remote support tools are used to fix issues on any of your devices.
How do I Register my product with Netgear?
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.
How do I access my ReadyNAS remotely?
Using the computer from which you want to remotely access a ReadyNAS system, visit http://www.netgear.com/ReadyNAS-remote.
How do I access ReadyNAS duo?
Simply search for the hostname or IP address of your network-attached storage in File Explorer, or browse for the device in RAIDar. To log in to the NAS from a remote location, however, you must install and configure ReadyNAS Remote on your Duo and on the appropriate computer.
How do I access ReadyNAS on my IPAD?
To configure ReadyCLOUD:Install ReadyCLOUD from the iTunes Store and launch it.When prompted with the ReadyCLOUD screen, enter your MyNETGEAR username and password.Click the Sign In button. ... Tap the ReadyNAS to which you want to connect. ... Tap the share that you want to access.More items...
How do I use Netgear ReadyNAS?
1:203:04NETGEAR ReadyNAS Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have filled in your new account information. Select I agree to the terms and click Next nowMoreOnce you have filled in your new account information. Select I agree to the terms and click Next now choose your location to set the time for your readiness.
How do I access my files on ReadyNAS?
To access a share using a network-attached Windows device:Ensure that the SMB file-sharing protocol is enabled on your ReadyNAS system. ... Enter
How do I find the IP address of my Netgear NAS?
To find the IP address of your ReadyNAS download and run RAIDar. Access the web admin page of the ReadyNAS by clicking Admin Page in RAIDar or enter the URL https://ReadyNAS_IP_address/admin - where ReadyNAS_IP_address is the IP Address seen in RAIDar.
How can I access my NAS from my iPhone?
0:292:34Access Network Drives On iPhone And iPad - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf not you may be able to retrieve it from your device or router home. Page we enter 192.168. 1.200MoreIf not you may be able to retrieve it from your device or router home. Page we enter 192.168. 1.200 which is a static address we've assigned to our nas then tap connect.
How do I view NAS Files on my iPhone?
Step 1: Make sure your iPhone/iPad and NAS drive are both connected to the same network. You should know the IP address of your NAS drive. Step 2: Tap on menu option in the files App >> Connect to Server >> enter smb://nas-drive-ip-address >> Registered user >> Enter username and password >> Tap on Next.
How do I get Freenas on my iPhone?
On iPhone I just go to the Files app and tap "Connect to Server" and then enter the IP for the server and the login information. This is same process when I connect remotely. I have been able to connect in the same manner on my MacBook (connected to WiFi) without issue.
What is Netgear ReadyNAS default password?
The default credentials to log in to the local admin page are: Username: admin. Password: password.
What is Netgear NAS?
The Netgear ReadyNAS 202 is a speedy consumer/SOHO network-attached storage (NAS) device that gives you access to your documents, music, photos, and videos whether you're at home or away. It's a simple way to get a personal cloud setup.
How do I turn off Netgear NAS?
Preferred ShutdownPress the Power button. The Power LED blinks, prompting you to confirm the shutdown.Press the Power button again. The system shuts down gracefully.
How do I access my Netgear NAS storage?
Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system. Click the Start button under Set up a new ReadyNAS. Click the Discover button.
How do I reset my Netgear ReadyNAS Duo v2?
To perform a factory reset, continue to hold the Reset button until all Disk LEDs flash twice (once at 5 seconds and then 25 seconds later), and then release the button.
Complimentary Support
NETGEAR provides complimentary technical support for NETGEAR products for 90 days from the original date of purchase.
NETGEAR Premium Support
A single point of support around the clock. GearHead Technical Support makes it easy to fix issues on not just your NETGEAR purchase but for your entire home network. The service includes support for the following:
Where is the ReadyNAS remote icon?
The ReadyNAS Remote icon displays in the system tray.
What chapter is Remote Access to ReadyNAS?
Chapter 2 Remote Access to Your ReadyNAS
How to register Netgear product?
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates, additional documentation, and support, visit http://support.netgear.com. Phone (US & Canada only): 1-888-NETGEAR. Phone (Other Countries): Check the list of phone numbers at
When you create a ReadyNAS remote account, are you automatically logged in as that user?
When you create a ReadyNAS Remote account, you are automatically logged in as that user.
Is Netgear a trademark?
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGE AR All rights reserved.
Can Cloud users access ReadyNAS?
Allow Cloud Users to Access Your ReadyNAS System on page 11). Cloud users can then access your ReadyNAS system remotely (see Chapter 2, Remote
Package and Accessories
The product box is somewhat different from what we used to see with earlier Netgear products. Orange is replaced with blue in its color scheme while dark-blue and white have remained intact. This change has been due to the company’s intention to color-code its products depending on their positioning.
Exterior Design
The Ultra 2 is designed in the same way as the ReadyNAS Duo we tested earlier, the new hardware platform never showing up. The case is mostly steel except for the front panel which has a few plastic details. The appearance is professional and serious. Even the front-panel indicators are quite inconspicuous except for the one in the Power button.
Hardware Configuration
The Ultra series NASes are based on the x86 platform. The Ultra 2 model has a single-core Intel Atom D425 processor which is clocked at 1.8 GHz and supports Hyper-Threading. The processor chip bears a small aluminum heatsink for cooling. The system memory is limited to a single 1GB DDR3 SO-DIMM.
Getting Started
Ours is a version without HDDs but Netgear also ships this NAS with one or two 2-terabyte disks preinstalled. So, we put our HDDs into the bays (which are designed for 3.5-inch devices only), connected the network and power cables, and pressed the Power button.
Basic Functionality
It is rather hard to see any innovations in Netgear’s firmware that have been implemented over the last year. We do not find them even by reading through the description of the new firmware version. The reason is that the manufacturer doesn’t try to put as many functions into the basic firmware as possible but implements them as add-on modules.
External Devices
Although the hardware platform employed in this NAS supports a lot of peripheral interfaces, the Ultra 2 only offers two USB 2.0 ports based on the chipset and one USB 3.0 port based on an external controller. As with most other NASes, you can use these ports to connect external disks (flash drives and HDDs), printers and UPSes.
System Settings
You can check out the status of the NAS by the colorful indicators in the bottom of the window. The home page of the web-interface offers such information as device name, network addresses, serial number, firmware version, memory amount, and disk usage.
From the Manufacturer
Designed for digital media enthusiasts, the NETGEAR ReadyNAS Ultra 2 Plus Home Media Server enables you to store, share, and protect your digital media files and access them easily across all of your networked devices, including your TiVo. It's equipped with two drive bays along with a dual-core processor for maximum performance.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
