What can I do with the Cayenne?
Add and remotely control sensors, actuators, and more to single board computers, microcontrollers, and other hardware connected to Cayenne. Widgets are used to visualize devices data, status, and actions. Every device, sensor and actuator that is added in Cayenne has one or more widgets associated depending on the hardware capabilities.
How do I set up the C-More for remote access?
Refer to Router Setup for Internet Access. The C-more panel default HTML pages that are located in the C-more panel memory will open. These HTML pages can be edited, however make certain the links remain intact. Select the C-more Remote Access Link, and the Remote Access HTML page will open.
What are the use of the custom widgets in Cayenne?
Widgets are used to visualize devices data, status, and actions. Every device, sensor and actuator that is added in Cayenne has one or more widgets associated depending on the hardware capabilities.
What happens to the C-More when the remote user is stopped?
The local operator can still operate the C-more panel when the connection of the remote user has been stopped. When Started, the screen will be cleared and the new updated image will be displayed as the data is received. This update time will vary on the connection quality and bandwidth.
Does 2021 Porsche Cayenne have remote start?
0:010:432021 Porsche Cayenne Turbo Remote Start - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhere we just finished this remote start integrated to the factory key fob on this 2021 porscheMoreWhere we just finished this remote start integrated to the factory key fob on this 2021 porsche cayenne turbo to activate it.
How long is Porsche Connect free?
Inclusive period The Porsche Connect package is included for a period of three years with the Taycan.
How do you manually open a Porsche Cayenne?
0:484:47Porsche with a dead key fob, visible key holes or split door handlesYouTubeStart of suggested clipEnd of suggested clipSimply insert the mechanical key and turn and you're in if it is not visible as in the later modelMoreSimply insert the mechanical key and turn and you're in if it is not visible as in the later model Cayenne look for a separation in the driver's door handle. Towards the back as shown.
Can you remote start with Porsche Connect?
I was incredibly surprised to learn that remote start is not available using Porsche Car Connect.
Do I have to pay for Porsche Connect?
Porsche Car Connect Subscription Cost There is a subscription charge for most of the Porsche Connect services. The Porsche Car Connect subscription cost will vary based on the model of your car and which package you choose, though most packages are free for at least the first year. Prices start at $230 per year.
Does Porsche Cayenne have WIFI?
Porsche offers a seven-gigabyte data pack that helps when using the on-board Wifi hotspot or consuming services like Amazon Music or the online radio. The constant Internet connection allows for improved navigation information, including real-time traffic.
How do you open the Porsche Macan door with a dead battery?
The Macan will have a plastic insert in the key hole that will need to be removed. Once the key hole is visible, insert the mechanical key and turn it counterclockwise (left). It will be awkward to get to. Then remove the key, release the handle fully and then pull it again to open.
How do you use the Porsche valet key?
0:060:48Is there a Valet Key for a Porsche Panamera or Cayenne? Answer, yes!YouTubeStart of suggested clipEnd of suggested clipIt does your valet key is hidden inside the master key you turn your key around there's a littleMoreIt does your valet key is hidden inside the master key you turn your key around there's a little tiny switch here in the back. You. Pull it down and pull the key forward. And there is your key.
How do you open the trunk of a dead Porsche battery?
0:101:36Dead Battery: Opening the Hood on your Porsche 911 - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich is underneath the on the left side here and what you'll see is you'll see this is the positiveMoreWhich is underneath the on the left side here and what you'll see is you'll see this is the positive side is connected to a red.
How do I activate my Porsche Connect?
Once you have handed the installation code to your authorized Porsche dealer, the product will be activated before delivering your vehicle. Next, install the Porsche Car Connect app on your smartphone and connect to your Porsche vehicle. Once connected, you will automatically be sent an activation code by text.
Does 2017 Porsche Cayenne have remote start?
0:001:06Porsche Cayenne 2017 OEM Fob remote starter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey're gonna show you what we must start are installed on Porsche Cayenne 2017 with a factoryMoreThey're gonna show you what we must start are installed on Porsche Cayenne 2017 with a factory remote. So on the factory remote. We're gonna press the lock button three.
Why Porsche has no push start?
The reason Porsche doesn't offer remote start is because in Germany they have the anti-idling laws.
How do I activate my Porsche Connect?
Once you have handed the installation code to your authorized Porsche dealer, the product will be activated before delivering your vehicle. Next, install the Porsche Car Connect app on your smartphone and connect to your Porsche vehicle. Once connected, you will automatically be sent an activation code by text.
What does Porsche Connect Plus include?
What Does Porsche Connect Plus do? Porsche Connect Plus allows you to control features in your car with your mobile device. Easily play your favorite playlists with Apple CarPlay™ capability, and you can track your car's performance with the Porsche Track Precision App.
What is Porsche Connect Navigation & Infotainment package?
The package of Navigation and Infotainment services includes functions and apps that enable drivers to make better use of their time during the journey and arrive more quickly at their destination.
Do you need a SIM card for Porsche Connect?
A SIM card is required for this. In certain countries, a SIM card is already integrated into the vehicle. Of course, you can use your own SIM card. After your Porsche is connected to the Internet, you can link your vehicle to the Porsche ID account.
Device Dashboards
Take full control of your project by creating a custom dashboard with drag-and-drop widgets to visualize, manage, and control connected devices.
Connect Sensors and More
Add and remotely control sensors, actuators, and more to single board computers, microcontrollers, and other hardware connected to Cayenne.
Dashboard Widgets
Widgets are used to visualize devices data, status, and actions. Every device, sensor and actuator that is added in Cayenne has one or more widgets associated depending on the hardware capabilities.
Where is Remote Access loaded?
Run: If you select Run, the Remote Access executable file will be loaded temporarily into the web browsers temporary files folder of your PC.
How many links are there in a remote access HTML page?
Remote Access HTML Page: The default HTML page will have two links to choose from. The IP address should be displayed in the link if the panel project has been configured properly with the C-more Programming Software. The user must choose the link that applies to their network connection. Most office or factory networks will have Firewalls that protect the network from unauthorized outside connections.
Why does my remote panel beep?
Sound Feedback: You will hear some beeping from this client software if the Beep is not disabled in the panel project. The beep is the feedback sound from the remote panel when any input objects on the screen, such as Push Button, are clicked with the mouse and the remote panel receives the mouse operation properly. Presently the Remote Access application does not support playing the sound ( wav) files stored in the project. Only the local operator will hear the sound of the wav file playing.
Why do remote users zoom in on screen?
The Zoom features come in handy if the remote user wants to zoom in on a certain part of the screen to see better or perhaps take a screen capture and save it for documentation. This feature is client based and does not affect the view of the local operator. The image below gives an example using the zoom feature.
What is C-more console?
C-more Remote Access Console: The C-more Console will then open on the PC. The user will be requested to enter the correct data before any screen data will be displayed. If not, for security purposes it is highly recommended that the user accounts be configured with a User Name and Password.
What to do if you cannot control objects on the screen?
If you cannot control objects on the screen, you will need to verify your user account access to see if you have control privileges. These accounts are configured in the panel project. Refer to Setting Up Remote Access. If the PC that is running the viewer has a touch screen interface, then you may use it as well.
How to find the IP address of a panel?
Open Internet Explorer or any Internet Browser software and type in the panel’s IP address.
Where is remote access window?
The Remote Access window is accessed from the Panel Network window.
How many remote users can you have?
Each Remote Access Account can support a maximum of 5 remote user connections at a time. This allows for a maximum of 15 remote users that can be active at one time, if all three accounts are configured for the maximum setting of 5 each. Enter the number of users.
What is a C-more project password?
The C-more Programming Software also has project password features that can be assigned to screens and objects to help control who can access them. These passwords are used by both the local and remote operators to restrict use to authorized personnel only. Remote users will need to know these passwords just as the local user do. There are eight group names that can be configured for passwords. For more information, click on the green Password text.
What is remote view only?
View Only: (Default for Account #1 when the remote access has been enabled.) This permission level gives the remote user the ability to only view the screen that is active on the panel (view the screen that a local operator is viewing). This can be utilized for users that are not authorized to change screens or control objects. This permission level will not interfere with the local operations of the panel. This mode could likely be used by Managers who want to monitor the machine operations for production reasons or machine status without interfering with the local operator or machine operation.
What is the port number of a C-more?
The Port No. is the destination TCP port number used by the Remote Access software and the listening TCP port of the C-more panel for this connection . This will be needed for access through a Firewall/Router. Enter the Port Number. The port number must be unique for each panel on the local network when those panels are accessed from outside of that network.
What is screen change in C-more?
View and Screen Change: Gives the remote user the ability to view and activate the “ Screen Change ” objects that are located on the active screen. This permission does not allow the remote user to activate other objects on the screen. If there are no “ Screen Change ” objects on the active screen, then remote user will not be able to change the screen. Screen Change button placement will need to be considered when the screens are created in the C-more project if the programmer wants remote users to have screen change abilities. This mode can affect the local operator if the remote user is changing screens while the local operator is using the panel.
Where are C-more passwords stored?
The account Passwords are stored in the C-more panel Project . The programmer must enable the Remote Access feature. Account #1 will default as the active account with a blank password. If no password is desired, the field can be left blank. If this field is not configured (no password required) the user will not need to enter a password and any user authorized, or unauthorized, will be able to connect to the panel remotely with the permissions configured for that account.