Remote-access Guide

open routing and remote access server 2012

by Amir Kunze Published 2 years ago Updated 2 years ago
image

Routing and Remote Access in Windows Server 2012 - Part 1

  1. First of all open your Server Manager. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it ...
  2. The next page is for selecting the "Installation type." Select the first option and then click on "Next".
  3. On the next page you must select the rolls to be installed. Scroll Down to the "Remote Access" and click on it.
  4. The next page is for the Features, you can select any feature you want it to install or otherwise simply click on "Next" button without selecting anything like ...
  5. Now comes the main part where you must select the "Roll Services under Remote Access." Select both the services i.e. "Direct Access and VPN" and "Routing".

Procedure
  1. Open the Windows Server 2012 Server Manager.
  2. From the Server Manager Dashboard, select Manage > Add Roles and Features.
  3. Click Next to display the Select Server Roles window.
  4. Select the Remote Access check box. ...
  5. Click Next until the Select Role Services page is displayed.
  6. Select Routing.

Full Answer

How to configure remote routing and remote access in Windows Server 2012?

Routing and Remote Access in Windows Server 2012 - Part 1. In the Server Manager you will find an option for "Add Roles and Feature" on the front page; click on it or you can go to the "Manage" option and then click the "Add Roles and Features", they both will open the same window. Now a new window will be opened named "Add Roles and Features".

How do I enable remote access to a Windows Server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next. Click Remote access (dial-up or VPN)to permit remote computers to dial in or connect to this network through the Internet.

How do I add remote access to a server pool?

Here I have only one server in the Server Pool so my server is automatically selected. On the next page you must select the rolls to be installed. Scroll Down to the "Remote Access" and click on it. After clicking on Remote Access, a new window will be opened where you must select the "Add Features" option.

How do I create a Windows Group for remote access server?

Name your Policy, and select Remote Access Server (VPN/Dial-up). Leave this window for a moment, go into AD, create a Group and name it VPN Access or whatever you wish, and add some users. Come back, and add that Windows Group by clicking Add -> Windows Group.

image

What is Routing and Remote Access server 2012?

Instructions. Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them. To install this feature complete the steps below.

How do I open Routing and Remote Access?

Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies. Right-click the right pane, point to New, and then click Remote Access Policy.

How do I remotely access a Windows 2012 server?

Remote Desktop Services for Windows Server 2012Open the Server Manager Dashboard.Click Add Roles and Features.Choose Role-based or feature-based installation.Select current server from the pool.Select Remote Desktop Services.Select Remote Desktop Licensing and Remote Desktop Session Host.More items...•

What is the difference between RAS and RRAS?

Microsoft Remote Access Server (RAS) is the predecessor to Microsoft Routing and Remote Access Server (RRAS). RRAS is a Microsoft Windows Server feature that allows Microsoft Windows clients to remotely access a Microsoft Windows network.

What is Windows Routing and Remote Access?

RRAS is a software router and an open platform for routing and networking. It offers routing services to businesses in local area network (LAN) and wide area network (WAN) environments or over the Internet by using secure VPN connections.

How do I restart Routing and Remote Access Service?

To ensure that the service is running, type Get-Service iphlpsvc at a Windows PowerShell prompt. To enable the service, type Start-Service iphlpsvc from an elevated Windows PowerShell prompt. To restart the service, type Restart-Service iphlpsvc from an elevated Windows PowerShell prompt.

How can I remotely access a server by IP address?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How do I enable remote access to my server?

Right-click on "Computer" and select "Properties". Select "Remote Settings". Select the radio button for "Allow remote connections to this computer". The default for which users can connect to this computer (in addition to the Remote Access Server) is the computer owner or administrator.

What is Anywhere Access server 2012?

When you turn on the Anywhere Access functionalities, Remote Web Access, virtual private network, and DirectAccess in Windows Server Essentials, or in Windows Server 2012 R2 with the Windows Server Essentials Experience role installed, they enable your network users to access server resources from any location with an ...

What is the main purpose of a RAS server?

A remote access server (RAS) is a type of server that provides a suite of services to remotely connected users over a network or the Internet. It operates as a remote gateway or central server that connects remote users with an organization's internal local area network (LAN).

What is RAS protocol?

Registration, admission, and status (RAS) is a component of a network protocol that involves the addition of (or refusal to add) new authorized users, the admission of (or refusal to admit) authorized users based on available bandwidth, and the tracking of the status of all users.

What are three examples of remote access locations?

What Is Remote Access?Queens College.Harvard University Extension School.

How do I access my home network remotely?

You can access your home network remotely by manually turning on the remote management feature on your home router. You should also set up dynamic DNS to tackle the dynamic public IP address problem. Other options include a remote access VPN, third-party apps like “TeamViewer”, or a “Remote Desktop”.

How do I install Remote Access and routing in Windows 2016?

Steps: Enable routing on Microsoft Windows Server 2016 In Routing and Remote Access, right-click the server, and select Configure and Enable Routing and Remote Access. When the setup wizard launches, click Next. Select Custom configuration and click Next. Select LAN routing and click Next.

How do I access a remote server using IP address?

Remote Desktop to Your Server From a Local Windows ComputerClick the Start button.Click Run...Type “mstsc” and press the Enter key.Next to Computer: type in the IP address of your server.Click Connect.If all goes well, you will see the Windows login prompt.

How do I access my router public IP?

3:017:55How to Access your Router from Outside Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow here comes the interesting part anytime you want to access your router from the inside yourMoreNow here comes the interesting part anytime you want to access your router from the inside your network then you will have to type in the router IP address from the connected device. However. If you

What is a RRAS?

If you are using Hyper-V Network Virtualization or you have VM networks deployed with VLANs, you can deploy RRAS as a virtual machine (VM)-based software gateway and router that allows Cloud Service Providers (CSPs) and Enterprises to enable datacenter and cloud network traffic routing between virtual and physical networks, including the Internet.

Is RRAS available in Server 2012?

The RRAS Multitenant Gateway is available only in Windows Server 2012 R2. It is not available in Windows Server® 2012.

What is R2 routing?

Windows Server 2012 R2 routing/NAT functionality feature is a part of Remote Access and allows for connecting 2 networks together, allowing a Windows machine with at least 2 NICs on 2 separate networks to handle the routing between them .#N#To install this feature complete the steps below.

How to add roles and features to a server?

To start, from Server Manager click Manage > Add Roles and Features. On the Before You Begin page, click Next. Select Role-based or feature-based installation and click Next. On Server Selection select the server you want to install the feature on and click Next.

How to enable remote access to a server?

Right-click the server, and then click Configure and Enable Routing and Remote Accessto start the Routing and Remote Access Server Setup Wizard. Click Next.

How to reconfigure a server?

To reconfigure the server, you must first disable Routing and Remote Access. You may right-click the server, and then click Disable Routing and Remote Access. Click Yes when it is prompted with an informational message.

How to create a group VPN?

Create a group that contains members who are permitted to create VPN connections. Click Start, point to Administrative Tools, and then click Routing and Remote Access. In the console tree, expand Routing and Remote Access, expand the server name, and then click Remote Access Policies.

How to connect to a dial up network?

If they are, see your product documentation to complete these steps. Click Start, click Control Panel, and then double-click Network Connections. Under Network Tasks, click Create a new connection, and then click Next. Click Connect to the network at my workplace to create the dial-up connection, and then click Next.

Can you grant callbacks in Windows 2003?

Administrators can only grant or deny access to the user and specify callback options, which are the access permission settings available in Microsoft Windows NT 4.0. The remaining options become available after the domain has been switched to native mode.

Where is the Routing and Remote Access menu?

Click Tools in the top right corner of Server Manager, select Routing and Remote Access from the drop-down menu.

What tab to check for remote access?

On the Logging tab, check Log additional Routing and Remote Access information (used for debugging).

How to start VPN debugging?

If you are debugging a VPN or other interface, you might want to now manually start it by right clicking the interface name and selecting Connect from the context menu. To see the list of interfaces, click Network Interfaces on the left of the Routing and Remote Access MMC.

How to launch NPS in RRAS?

Once you’ve returned to the RRAS window, *left-click* Remote Access Logging and Policies. Then right-click and Launch NPS.

How to change VPN to SSTP?

Click the Security Tab -> Change type of VPN to SSTP. By default, it detects the type of VPN automatically, but slightly slows down the process.

What OS is SSTP?

SSTP was introduced in Windows Vista, so the OS must be Vista or Greater ( or Server 2008 and greater). Go to Network and Sharing Center. Click Setup New Connection or Network.

Can you use NAP to access VPN?

Enter your user information. Don’t forget that if you didn’t setup a Group to access the VPN using NAP , you’ll need to enable Dial-In access within Active Directory Users and Computers for that user.

Can you skip the next section of VPN?

If you don’t want to add any additional security (IP restrictions, Group Access to VPN), then you can skip the next section and jump to setting up the client. I find it super interesting, though. I’d give it at least a glance.

Does RRAS work with IIS?

It will force you to install IIS, which is odd, because RRAS can work independently of IIS (you can even stop and disable IIS and RRAS will still work). I would think just the IIS Hostable Web Core would be enough, but whatever. It’s required. Go ahead and accept that it will be installed.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9