How do I connect my Panasonic HomeHawk?
Initial setup for Android devicesPlug in the camera and wait about 1 minute for the camera's LED to light in green. ... Start the [HomeHawk] app. ... When prompted, press the SETUP button on the back of the camera. ... If necessary, enter the password required to connect to your wireless router and then tap [Next].More items...
How do I change the wifi on my HomeHawk?
Screenshots shown in this answer are from an iPhone, using the HomeHawk App ver. 3.1....Reset From the App.From the HomeHawk app home screen tap the settings icon .Tap [ Settings ].Tap [ Access Point Settings ].Tap [ System ].Tap [ Reset Access Point ].Select the desired setting. ... Follow the on-screen instructions.
How do you turn off the HomeHawk camera?
From the HomeHawk home screen tap [ HD Camera ]. Tap the "Menu" icon. Tap [ Settings ]. to exit.
How do I reset my Panasonic indoor camera?
To perform a factory reset, do the following:Power the camera.Using a paper-clip or suitably pointed object, press the factory reset button and hold for 1 second. ... The LED on the front of the camera will flash red, then go off, then flash red for a few times as it resets and reboots itself.More items...•
How do I reset my password on my Panasonic HomeHawk?
You must be connected to the same wi-fi network to change the login password.From the HomeHawk home screen tap the tools icon. for the floor or shelf camera.Tap [ Login Settings ].Confirm that "Automatic Login" is turned off then Tap [ Change Login Password ].Enter the new password. Then tap [ OK ].
How do I change my HomeHawk password?
Troubleshooting - I forgot my password for the HomeHawk access point.Connect to the access point while at home and change the password. ... If you cannot connect to the access point while at home to change the password, force the access point to reset its settings and then configure the access point again.
Does HomeHawk work with Alexa?
With the Panasonic HomeHawk skill and Alexa, you can control your Panasonic HomeHawk camera with your voice via Alexa.
How do I find the IP address of my Panasonic camera?
1:073:27Configuring Panasonic PRO PTZ Robotic Camera IP ... - YouTubeYouTubeStart of suggested clipEnd of suggested clip0.1 you can check the IP address of the camera by one of two ways. The first way is right in theMore0.1 you can check the IP address of the camera by one of two ways. The first way is right in the camera menu. The second way is using an easy-to-use software. We call ez IP setup.
How do I reset my digital camera?
Cameras with a RESET buttonLocate the RESET button on the camera.Using pointed object (like a ballpoint pen), press and hold the RESET button for 2-3 seconds.Release the RESET button.
How do I reset my gh5s to factory settings?
1 Factory ResetTurn the camera On.Turn the mode dial to P.Press the Menu / Set button.Use the directional buttons ▲/▼/►/◄ to move the selection frame. ... Go to the Setup option and scroll through the listings until you get to Reset and select it.More items...
How do I change my HomeKit to a new Wi-Fi?
Go to the Home tab, tap in the upper-left corner, then tap Home Settings. If you have multiple homes, choose the home where you put your router. Scroll down and tap Wi-Fi Network & Routers. Then tap an accessory to change the level of connection security.
How do I connect my HP printer to the Wi-Fi?
Connect the printer with the Wireless Setup Wizard (printers with a touchscreen)Place the printer near the Wi-Fi router.Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard.Select the name of your network, and then enter the password to complete the connection. Note:
How do I change the Wi-Fi on my HomePod mini?
View network information: Tap Wi-Fi Address to switch between viewing the HomePod network identifier and the name of the Wi-Fi network it's connected to. HomePod automatically connects to the same Wi-Fi network as your iOS or iPadOS device.
How do I set up Apple home Wi-Fi?
Tap and hold or 3D Touch the HomePod icon for the specific HomePod you're having issues with. At the top a message will appear that says “This HomePod is on a different Wi-Fi network than this iPhone. Move HomePod to '(Wi-Fi name)'”. Give it a few seconds and HomePod will automatically connect to the new Wi-Fi network.
Configuring automatic login
You can specify whether or not you must enter a login password in order to connect to your devices while away from home.
Changing the login password
You can change the login password used in order to connect to your devices while away from home.
